Lámhleabhar Treorach um Thacar Athsholáthair Tithíochta Fón Póca Nokia 130 (2017) TA-1017

1. Réamhrá

This manual provides detailed instructions for replacing the full housing, battery back door, and English keyboard of your Nokia 130 (2017) TA-1017 mobile phone. This kit is designed to restore the aesthetic and structural integrity of your device if the original housing is old, damaged, cracked, or broken. Each component has undergone quality checks to ensure good condition before shipment.

2. Faisnéis Sábháilteachta agus Nótaí Tábhachtacha

• Suiteáil Ghairmiúil Molta: Replacing phone components requires technical skill and specialized tools. We highly recommend professional installation to avoid damage to your device. The manufacturer and seller are not responsible for any damage to your cellphone/mobile phone that may occur during the replacement process if performed by an untrained individual.
• Ensure your phone is powered off and the battery is removed before starting any disassembly or assembly.
• Oibrigh i dtimpeallacht ghlan, dea-shoilsithe, agus saor ó statach.
• Keep track of all screws and small parts during disassembly.

3. Ábhar Pacáiste

Your replacement kit includes the following components, which will appear exactly as shown in the product images:

• Front Housing (Faceplate) with English Keyboard
• Middle Frame (Chassis)
• Battery Back Door (Back Cover)

Figure 1: Assembled Nokia 130 (2017) phones, demonstrating the final appearance of the housing.

4. Treoir Socraithe agus Suiteála

This section outlines the general steps for replacing the phone housing. Specific tools (e.g., small screwdrivers, plastic prying tools) are typically required and are not included in this kit.

4.1 Disassembly of Old Housing

1. Gléas Cumhachta As: Ensure your Nokia 130 (2017) is completely powered off.
2. Bain Clúdach Ceallra: Carefully remove the existing battery back door.
3. Remove Battery and SIM/Memory Cards: Take out the battery, SIM card(s), and any memory cards.
4. Bain na scriúnna: Locate and remove all screws securing the middle frame to the front housing. These are typically small Phillips head screws.
5. Comhpháirteanna ar leithligh: Using a plastic prying tool, carefully separate the old front housing, middle frame, and any internal components (like the mainboard, screen, camera module, etc.) from each other. Be gentle to avoid damaging delicate connectors or flex cables.
6. Transfer Internal Components: Carefully detach all internal components (mainboard, screen, keypad flex, speaker, microphone, camera, etc.) from the old housing parts. These will be transferred to the new housing.

Fíor 2: Example of disassembled white housing components, showing the front housing, middle frame, and back cover.

Fíor 3: Example of disassembled black housing components, showing the front housing, middle frame, and back cover.

4.2 Assembly of New Housing

1. Prepare New Housing: Ensure the new housing components are clean and free of dust or debris.
2. Suiteáil Comhpháirteanna Inmheánacha: Carefully transfer and install all internal components (mainboard, screen, keypad flex, speaker, microphone, camera, etc.) into the new middle frame and front housing. Ensure all flex cables are properly connected and seated.
3. Secure Middle Frame: Align the middle frame with the front housing and gently press them together until they click into place.
4. Cuir Scriúnna Isteach: Re-insert and tighten all screws to secure the middle frame to the front housing. Do not overtighten.
5. Install SIM/Memory Cards and Battery: Re-insert your SIM card(s), memory card, and battery.
6. Attach Back Cover: Snap the new battery back door onto the phone until it is securely closed.
7. Cumhacht Air agus Tástáil: Power on your phone and test all functions, including the screen, keypad, speakers, microphone, and camera, to ensure everything is working correctly.

Fíor 4: Taobh view of assembled phones, showing the seamless fit of the new housing.

5. Treoracha Oibriúcháin

Since this product is a replacement housing, its operation is tied to the functionality of the Nokia 130 (2017) phone itself. After successful installation, your phone should operate as normal. Refer to your original Nokia 130 (2017) user manual for specific operating instructions for the device.

• The new English keyboard should function identically to the original.
• Ensure all buttons (power, navigation, call, end call) provide tactile feedback and register presses correctly.

6. Cothabháil

• Glanadh: Use a soft, dry, lint-free cloth to clean the exterior of the phone housing. For stubborn smudges, slightly dampNigh an t-éadach le huisce nó le glantóir scáileáin atá deartha le haghaidh leictreonaic. Seachain ceimiceáin ghéara nó ábhair scríobacha.
• Cosaint: Consider using a protective case or screen protector to prevent future damage to the housing.
• Seachain Coinníollacha Foircní: Keep the phone away from extreme temperatures, direct sunlight, and excessive moisture to prolong the life of the housing and internal components.

7. Fabhtcheartú

Má bhíonn fadhbanna agat tar éis an tithíocht a athsholáthar, smaoinigh ar na nithe seo a leanas:

• Cnaipí Neamhfhreagartha:
  • Ensure the keypad flex cable is properly seated and connected to the mainboard.
  • Check if the physical buttons on the new housing are aligned correctly with the underlying mechanisms.
• Screen Not Displaying/Flickering:
  • Verify that the screen's flex cable is securely connected to the mainboard.
  • Ensure no debris is obstructing the connection.
• Tithíocht nach bhfuil ag Dúnadh i gCeart:
  • Check for any misplaced internal components or cables that might be preventing the housing from seating correctly.
  • Ensure all screws are properly tightened and no foreign objects are trapped.
• Fón nach bhfuil ag dul ar siúl:
  • Confirm the battery is correctly inserted and charged.
  • Double-check all internal connections, especially the mainboard and power button flex.

If issues persist, it is advisable to seek assistance from a qualified phone repair technician.

8. Sonraíochtaí

9. Leideanna Úsáideora

• Before fully reassembling, perform a quick test by connecting the screen and mainboard to ensure basic functionality.
• Use a magnetic mat to organize screws during disassembly to prevent loss and ensure they are returned to their correct positions.
• Take photos or videos during disassembly to serve as a reference for reassembly.

10. Barántas agus Tacaíocht

This product is checked for quality before shipping. If you encounter any quality problems with the goods received, please contact the seller with pictures or videos for review. Support for resending or refunding may be available based on the assessment of the issue.