G2 HF and UHF Smart Terminal
“
Product Specifications
- Product Name: G2 SMTerminal HF & UHF
- Weight: ~200g
- Size: 170 x 57.5 x 22mm
- Operating Temperature: 10-40°C
- LED indicator: 1x Blue
- Buzzer: 1x Buzzer
- LCD Display: 2.4 inches
- Keypad: 4 button Keys
- Communication Interface: 2.4 GHz Wi-Fi
- Input Voltage: DC +5V
- Antenna: Directly Matched Antenna
- RF Transceive Frequency:
- UHF: 902-928 MHz (can be set according to
region/country) - HF: 13.56 MHz
- RF Specification:
- UHF: Gen 2
- HF: ISO15693 Standard
- Reading Range:
- UHF: 3cm
- HF: 3cm
Product Usage Instructions
- Power Supply: Connect the device to a DC +5V
power source. - LCD Display: The 2.4 inches LCD display will
show the relevant information. - Keypad Input: Use the 4 button keys for
navigation and input. - Communication: Connect to a Wi-Fi network
using the 2.4 GHz interface. - Antenna Adjustment: Ensure the antenna is
directly matched for optimal performance. - RF Frequency Settings: Set the UHF frequency
range (902-928 MHz) according to the region or country
requirements.
Frequently Asked Questions (FAQ)
Q: What should I do if the device does not power on?
A: Check the power supply connection and ensure it is receiving
DC +5V. If the issue persists, contact customer support for
assistance.
Q: How can I adjust the RF frequency for different
regions?
A: Navigate to the settings menu and locate the frequency
adjustment option. Select the appropriate range based on the
region/country requirements.
Q: Can I use this device outdoors?
A: The operating temperature range of 10-40°C allows for outdoor
use within this temperature limit. Avoid exposure to extreme
weather conditions.
“`
G2 SMTerminal HF & UHF
Contactless RFID technology offering operational convenience and performance Compact industrial design to allow it to be mount on any location Easy installation with just 1 power cord required otted electronics design that is suited for industrial grade usage Flexible data communication with2.4 GHz Wi-Fi Large 2.4 inches LCD and electronic buzzer provides positive audio-visual feedback to user operations Read/write UHF RFID card operations at 902- 928 Mhz Read/write HF RFID card operations at 13.56Mhz Multiple I/O ports for optional extension like stations status indicator and machine status
Weight Size Operating Temperature LED indicator Buzzer LCD display Keypad Communication interface Input voltage Antenna RF Transceive Frequency
RF Specification
Reading Range
~200g 170 x 57.5 x 22mm
10-40C 1xBlue 1xBuzzer 2.4 inches LCD Display 4 button Keys 2.4 GHz Wi-Fi DC +5V
Directly Matched Antenna
UHF: 902- 928 Mhz can be set according region/country HF: 13.56 MHz UHF: Gen 2 HF: ISO15693 Standard UHF: 3cm HF: 3cm
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ·Reorient or relocate the receiving antenna. ·Increase the separation between the equipment and receiver. ·Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
·Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. ·This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
·This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Documents / Resources
 |
G PRO G2 HF and UHF Smart Terminal [pdf] Instructions G2, G2 HF and UHF Smart Terminal, HF and UHF Smart Terminal, UHF Smart Terminal, Smart Terminal |