Boardcon MINI507 Kosten Optimalisearre System Module
Ynlieding
Oer dizze hânlieding
Dizze hantlieding is bedoeld om de brûker in oer te jaanview fan it bestjoer en foardielen, folsleine funksjes spesifikaasjes, en opsetten prosedueres. It befettet ek wichtige feiligensynformaasje.
Feedback en fernijing nei dizze hânlieding
Om ús klanten te helpen it measte út ús produkten te heljen, meitsje wy kontinu ekstra en bywurke boarnen beskikber op de Boardcon webside (www.boardcon.com , www.armdesigner.com). Dizze omfetsje hânboeken, applikaasjenotysjes, programmearring bglamples, en bywurke software en hardware. Kontrolearje periodyk om te sjen wat nij is! As wy prioritearje wurk oan dizze bywurke boarnen, feedback fan klanten is de nûmer ien ynfloed, As jo fragen, opmerkings, of soargen oer jo produkt of projekt, nim dan gerêst kontakt mei ús op op support@armdesigner.com.
Beheinde garânsje
Boardcon garandearret dat dit produkt frij is fan defekten yn materiaal en fakmanskip foar in perioade fan ien jier fan 'e datum fan oankeap. Yn dizze garânsjeperioade sil Boardcon de defekte ienheid reparearje of ferfange yn oerienstimming mei it folgjende proses: In kopy fan 'e orizjinele faktuer moat opnommen wurde by it werombringen fan de defekte ienheid oan Boardcon. Dizze beheinde garânsje dekt gjin skea dy't ûntstien is út ferljochting of oare stroomstoarmen, misbrûk, misbrûk, abnormale operaasjes, of besykjen om de funksje fan it produkt te feroarjen of te feroarjen. Dizze garânsje is beheind ta reparaasje of ferfanging fan 'e defekte ienheid. Yn gjin gefal sil Boardcon oanspraaklik of ferantwurdlik wêze foar ferlies of skea, ynklusyf, mar net beheind ta, ferlerne winst, ynsidintele of gefolchskea, ferlies fan bedriuw, of antisipearjende winsten dy't fuortkomme út it gebrûk of ûnfermogen om dit produkt te brûken. Reparaasjes meitsje nei it ferstriken fan 'e garânsjeperioade binne ûnderwurpen oan in reparaasjekosten en de kosten fan weromferstjoering. Nim dan kontakt op mei Boardcon om in reparaasjetsjinst te regeljen en ynformaasje oer reparaasjekosten te krijen.
MINI507 Yntroduksje
Gearfetting
De MINI507 systeem-op-module is foarsjoen fan Allwinner's T507 quad-core Cortex-A53, G31 MP2 GPU. It is spesifyk ûntworpen foar tûke apparaten lykas yndustriële controller, IoT-apparaten, digitale kluster en auto-apparaten. De oplossing mei hege prestaasjes en lege macht kin klanten helpe om nije technologyen rapper yn te fieren en de totale effisjinsje fan 'e oplossing te ferbetterjen. Yn it bysûnder, T507 is kwalifisearre foar AEC-Q100 testen.
Features
- Mikroprosessor
- Quad-core Cortex-A53 oant 1.5G
- 32KB I-cache, 32KB D-cache, 512KB L2-cache
- Unthâld Organisaasje
- DDR4 RAM oant 4GB
- EMMC oant 64GB
- Boot ROM
- Unterstützt download systeemkoade fia USB OTG
- Feiligens ID
- Grutte oant 2Kbit foar feiligenschip-ID
- Video Decoder / Encoder
- Unterstützt fideodekodearring oant 4K@30fps
- Unterstützt H.264 kodearring
- H.264 HP kodearring oant 4K @ 25fps
- Picture grutte omheech t0 4096 × 4096
- Display Subsysteem
- Video Output
- Unterstützt HDMI 2.0-stjoerder mei HDCP 1.4, oant 4K@30fps (T507H-opsje)
- Unterstützt Serial RGB-ynterface oant 800 × 640 @ 60fps
- Unterstützt LVDS-ynterface Dual link oant 1920 × 1080 @ 60fps en Single link oant 1366 × 768 @ 60fps Unterstützt RGB-ynterface oant 1920 × 1080 @ 60fps
- Unterstützt BT656-ynterface oant 1920 × 1080 @ 30fps
- Unterstützt 1ch TV-útfier mei plug-deteksje
- Ofbylding yn
- Unterstützt MIPI CSI-ynfier oant 8M@30fps of 4x1080P@25fps
- Unterstützt parallelle ynterfaces oant 1080P @ 30fps
- Unterstützt BT656/BT1120
- Analoge audio
- Ien stereo koptelefoanútfier
- I2S/PCM/AC97
- Trije I2S / PCM ynterface
- Stypje oant 8-CH DMIC
- Ien SPDIF ynfier en útfier
- USB
- Fjouwer USB 2.0 ynterfaces
- Ien USB 2.0 OTG, en trije USB-hosts
- Ethernet
- Stypje twa Ethernet ynterface
- Ien 10/100M PHY op CPU Board
- Ien GMAC / EMAC ynterface
- I2C
- Oant fiif I2C's
- Stypje standert modus en snelle modus (oant 400kbit / s)
- Smart Card Reader
- Stypje ISO / IEC 7816-3 en EMV2000 (4.0) spesifikaasjes
- Stypje syngroane en alle oare net-ISO 7816 en net-EMVcards
- SPI
- Twa SPI-controllers, elke SPI-controller mei twa CS-sinjalen
- Folsleine duplex syngroane serial ynterface
- 3 of 4-wire modus
- UART
- Oant 6 UART-controllers
- UART0/5 mei 2 draden
- UART1/2/3/4 elk mei 4 triedden
- UART0 standert foar debug
- Kompatibel mei yndustry-standert 16550 UARTs
- Stypje RS485-modus op 4-draads UART's
- CIR
- Ien CIR controllers
- Fleksibele ûntfanger foar konsumint IR remote control
- TSC
- Stypje meardere transportstreamformaat
- Stypje DVB-CSA V1.1 / 2.1 Descrambler
- ADC
- Fjouwer ADC input
- 12-bit resolúsje
- Voltage ynfierberik tusken 0V oant 1.8V
- KEYADC
- Ien ADC-kanaal foar kaaiapplikaasje
- 6-bit resolúsje
- Voltage ynfierberik tusken 0V oant 1.8V
- Stypje ingle, normale en trochgeande modus
- PWM
- 6 PWM's (3 PWM-pearen) mei ûnderbrekkingsbasearre operaasje
- oant 24/100MHz útfier frekwinsje
- Minimum resolúsje is 1/65536
- Underbrekke Controller
- Stypje 28 interrupts
- 3D Graphics Engine
- ARM G31 MP2 oanbod
- Stypje OpenGL ES 3.2/2.0/1.1, Vulkan1.1, Open CL 2.0 standert
- Power ienheid
- AXP853T oan board
- OVP / UVP / OTP / OCP beskermingen
- DCDC6 0.5 ~ 3.4V @ 1A útfier
- DCDC1 3.3V @ 300mA útfier foar Carry board GPIO
- ALDO5 0.5 ~ 3.3V @ 300mA útfier
- BLDO5 0.5 ~ 3.3V @ 500mA útfier
- Ext-RTC IC oan board (opsje)
- Hiel lege RTC konsumearje stroom, minder 5uA by 3V knop Sel (opsje)
- Temperatuer
- Yndustriële klasse, Bedriuwstemperatuer: -40 ~ 85 °C
Blokdiagram
T507 Block Diagram
Untwikkelingsboerd (EMT507) Blokdiagram
Mini507 spesifikaasjes
| Eigenskip | Spesifikaasjes |
| CPU | Quad-core Cortex-A53 |
| DDR | 2GB DDR4 (oant 4GB) |
| eMMC FLASH | 8GB (oant 64GB) |
| Krêft | DC 5V |
| LVDS | Dual CH oant 4-Lane |
| I2S | 3-CH |
| MIPI_CSI | 1-CH |
| TSC | 1-CH |
| HDMI út | 1-CH (opsje) |
| Kamera | 1-CH(DVP) |
| USB | 3-CH (USB HOST2.0), 1-CH (OTG 2.0) |
|
Ethernet |
1000M GMAC
En 100M PHY |
| SDMMC | 2-CH |
| SPDIF RX/TX | 1-CH |
| I2C | 5-CH |
| SPI | 2-CH |
| UART | 5-CH, 1-CH (DEBUG) |
| PWM | 6-CH |
| ADC IN | 4-CH |
| Board Dimension | 51 x 65 mm |
Mini507 PCB Dimension
MINI507 Pin Definition
| J1 | Sinjaal | Beskriuwing | Alternative funksjes | IO Voltage |
| 1 | MDI-RN | 100M PHY MDI | 1.8V | |
| 2 | MDI-TN | 100M PHY MDI | 1.8V | |
| 3 | MDI-RP | 100M PHY MDI | 1.8V | |
| 4 | MDI-TP | 100M PHY MDI | 1.8V | |
| 5 | LED0/PHYAD0 | 100M PHY Link LED- | 3.3V | |
| 6 | LED3/PHYAD3 | 100M PHY Speed LED+ | 3.3V | |
| 7 | GND | Grûn | 0V |
| J1 | Sinjaal | Beskriuwing | Alternative funksjes | IO Voltage |
| 8 | GND | Grûn | 0V | |
|
9 |
LVDS0-CLKN/LCD-
D7 |
LVDS of RGB display ynterface |
PD7/EINT7/TS0-D3 |
3.3V |
|
10 |
LVDS0-D3N/LCD-D
9 |
LVDS of RGB display ynterface |
PD9/EINT9/TS0-D5 |
3.3V |
|
11 |
LVDS0-CLKP/LCD-
D6 |
LVDS of RGB display ynterface |
PD6/EINT6/TS0-D2 |
3.3V |
|
12 |
LVDS0-D3P/LCD-D
8 |
LVDS of RGB display ynterface |
PD8/EINT8/TS0-D4 |
3.3V |
|
13 |
LVDS0-D2P/LCD-D
4 |
LVDS of RGB display ynterface |
PD4/EINT4/TS0-D0 |
3.3V |
|
14 |
LVDS0-D1N/LCD-D
3 |
LVDS of RGB display ynterface |
PD3/EINT3/TS0-DVL
D |
3.3V |
|
15 |
LVDS0-D2N/LCD-D
5 |
LVDS of RGB display ynterface |
PD5/EINT5/TS0-D1 |
3.3V |
|
16 |
LVDS0-D1P/LCD-D
2 |
LVDS of RGB display ynterface |
PD2/EINT2/TS0-SYN
C |
3.3V |
|
17 |
LVDS1-D3N/LCD-D
19 |
LVDS of RGB display ynterface |
PD19/EINT19 |
3.3V |
|
18 |
LVDS0-D0N/LCD-D
1 |
LVDS of RGB display ynterface |
PD1/EINT1/TS0-EER |
3.3V |
|
19 |
LVDS1-D3P/LCD-D
18 |
LVDS of RGB display ynterface |
PD18/EINT18/SIM0-
DET |
3.3V |
|
20 |
LVDS0-D0P/LCD-D
0 |
LVDS of RGB display ynterface |
PD0/EINT0/TS0-CLK |
3.3V |
|
21 |
LVDS1-D2N/LCD-D
15 |
LVDS of RGB display ynterface |
PD15/EINT15/SIM0-
CLK |
3.3V |
|
22 |
LVDS1-CLKN/LCD-
D17 |
LVDS of RGB display ynterface |
PD17/EINT17/SIM0-
RST |
3.3V |
|
23 |
LVDS1-D2P/LCD-D
14 |
LVDS of RGB display ynterface |
PD14/EINT14/SIM0-
PWREN |
3.3V |
|
24 |
LVDS1-CLKP/LCD-
D16 |
LVDS of RGB display ynterface |
PD16/EINT16/SIM0-
DATA |
3.3V |
|
25 |
LVDS1-D1N/LCD-D
13 |
LVDS of RGB display ynterface |
PD13/EINT13/SIM0-
VPPPP |
3.3V |
|
26 |
LVDS1-D0N/LCD-D
11 |
LVDS of RGB display ynterface |
PD11/EINT11/TS0-D
7 |
3.3V |
|
27 |
LVDS1-D1P/LCD-D
12 |
LVDS of RGB display ynterface |
PD12/EINT12/SIM0-
VPPEN |
3.3V |
|
28 |
LVDS1-D0P/LCD-D
10 |
LVDS of RGB display ynterface |
PD10/EINT10/TS0-D
6 |
3.3V |
| 29 | LCD-D20 | RGB display ynterface | PD20/EINT20 | 3.3V |
| J1 | Sinjaal | Beskriuwing | Alternative funksjes | IO Voltage |
| 30 | LCD-D22 | RGB display ynterface | PD22/EINT22 | 3.3V |
| 31 | LCD-D21 | RGB display ynterface | PD21/EINT21 | 3.3V |
| 32 | LCD-D23 | RGB display ynterface | PD23/EINT23 | 3.3V |
| 33 | LCD-PWM | PWM0 | PD28/EINT28 | 3.3V |
| 34 | LCD-HSYNC | RGB display ynterface | PD26/EINT26 | 3.3V |
| 35 | GND | Grûn | 0V | |
| 36 | LCD-VSYNC | RGB display ynterface | PD27/EINT27 | 3.3V |
| 37 | LCD-CLK | RGB display ynterface | PD24/EINT24 | 3.3V |
| 38 | LCD-DE | RGB display ynterface | PD25/EINT25 | 3.3V |
| 39 | GND | Grûn | 0V | |
| 40 | GND | Grûn | 0V | |
| 41 | USB3-DM | USB 3 gegevens - | 3.3V | |
| 42 | HTX2N | HDMI útfier data 2- | 1.8V | |
| 43 | USB3-DP | USB3 data + | 3.3V | |
| 44 | HTX2P | HDMI útfier data2+ | 1.8V | |
| 45 | USB2-DM | USB 2 gegevens - | 3.3V | |
| 46 | HTX1N | HDMI útfier data 1- | 1.8V | |
| 47 | USB2-DP | USB2 data + | 3.3V | |
| 48 | HTX1P | HDMI útfier data1+ | 1.8V | |
| 49 | USB1-DM | USB 1 gegevens - | 3.3V | |
| 50 | HTX0N | HDMI útfier data 0- | 1.8V | |
| 51 | USB1-DP | USB1 data + | 3.3V | |
| 52 | HTX0P | HDMI útfier data0+ | 1.8V | |
| 53 | USB0-DM | USB 0 gegevens - | 3.3V | |
| 54 | HTXCN | HDMI-klok - | 1.8V | |
| 55 | USB0-DP | USB0 data + | 3.3V | |
| 56 | HTXCP | HDMI Klok + | 1.8V | |
| 57 | GND | Grûn | 0V | |
| 58 | HSDA | HDMI serial gegevens | Need Pull up 5V | 5V |
| 59 | UART0-TX | Debug Uart | PH0/EINT0/PWM3 | 3.3V |
| 60 | HSCL | HDMI serial CLK | Need Pull up 5V | 5V |
| 61 | UART0-RX | Debug Uart | PH1/EINT1/PWM4 | 3.3V |
| 62 | HHPD | HDMI hot plug detect | 5V | |
| 63 | PH4 | GPIO of SPDIF útfier | I2C3_SCL/PH-EINT4 | 3.3V |
|
64 |
HCEC |
HDMI konsumint elektroanika
kontrôle |
3.3V |
|
| 65 | GND | Grûn | 0V | |
| 66 | GND | Grûn | 0V | |
| 67 | MCSI-D3N | MIPI CSI differinsjaaloperator gegevens 3N | 1.8V | |
| 68 | MCSI-D2N | MIPI CSI differinsjaaloperator gegevens 2N | 1.8V | |
| 69 | MCSI-D3P | MIPI CSI differinsjaaloperator gegevens 3P | 1.8V | |
| 70 | MCSI-D2P | MIPI CSI differinsjaaloperator gegevens 2P | 1.8V |
| J1 | Sinjaal | Beskriuwing | Alternative funksjes | IO Voltage |
| 71 | MCSI-CLKN | MIPI CSI differinsjaal klok N | 1.8V | |
| 72 | MCSI-D1N | MIPI CSI differinsjaaloperator gegevens 1N | 1.8V | |
| 73 | MCSI-CLKP | MIPI CSI differinsjaal klok P | 1.8V | |
| 74 | MCSI-D1P | MIPI CSI differinsjaaloperator gegevens 1P | 1.8V | |
| 75 | GND | Grûn | 0V | |
| 76 | MCSI-D0N | MIPI CSI differinsjaaloperator gegevens 0N | 1.8V | |
| 77 | UART5-RX | UART5 of SPDIF yn of I2C2SDA | PH3/EINT3/PWM1 | 3.3V |
| 78 | MCSI-D0P | MIPI CSI differinsjaaloperator gegevens 0P | 1.8V | |
|
79 |
UART5-TX |
UART5 of SPDIF CLK of
I2C2SCL |
PH2/EINT2/PWM2 |
3.3V |
| 80 | PH-I2S3-DOUT0 | I2S-D0 of DIN1/SPI1-MISO | PH8/EINT8/CTS2 | 3.3V |
| 81 | LINEOUTR | Audio Analog R line útfier | Need Coupling CAP | 1.8V |
| 82 | PH-I2S3-MCLK | I2S-CLK/SPI1-CS0/UART2-TX | PH5/EINT5/I2C3SDA | 3.3V |
| 83 | LINEOUTL | Audio Analog L line útfier | Need Coupling CAP | 1.8V |
| 84 | PH-I2S3-DIN0 | I2S-D1 or DIN0/SPI1-CS1 | PH9/EINT9 | 3.3V |
| 85 | AGND | Audio Ground | 0V | |
| 86 | PH-I2S3-LRLK | I2S-CLK/SPI1MOSI/UART2RTS | PH7/EINT7/I2C4SDA | 3.3V |
| 87 | PC3 | Boot-SEL1/SPI0-CS0 | PC-EINT3 | 1.8V |
| 88 | PH-I2S3-BCLK | I2S-CLK/SPI1-CLK/UART2-RX | PH6/EINT6/I2C4SCL | 3.3V |
| 89 | PC4 | Boot-SEL2/SPI0-MISO | PC-EINT4 | 1.8V |
| 90 | LRADC | Key 6bit ADC input | 1.8V | |
| 91 | GPADC3 | Algemien 12bit ADC3 yn | 1.8V | |
| 92 | GPADC1 | Algemien 12bit ADC1 yn | 1.8V | |
| 93 | GPADC0 | Algemien 12bit ADC0 yn | 1.8V | |
| 94 | GPADC2 | Algemien 12bit ADC2 yn | 1.8V | |
| 95 | TV-OUT | CVBS-útfier | 1.0V | |
| 96 | PA/TWI3-SDA | PA11/EINT11 | 3.3V | |
| 97 | IR-RX | IR ynfier | PH10/EINT10 | 3.3V |
| 98 | PA/TWI3-SCK | PA10/EINT10 | 3.3V | |
| 99 | PC7 | SPI0-CS1 | PC-EINT7 | 1.8V |
| 100 | GND | Grûn | 0V | |
| J2 | Sinjaal | Beskriuwing | Alternative funksjes | IO Voltage |
| 1 | PE13 | CSI0-D9 | PE13/EINT14 | 3.3V |
| 2 | GND | Grûn | 0V | |
| 3 | PE14 | CSI0-D10 | PE14/EINT15 | 3.3V |
| 4 | SPI0_CLK_1V8 | PC0/EINT0 | 1.8V | |
| 5 | PE15 | CSI0-D11 | PE-EINT16 | 3.3V |
| 6 | PE12 | CSI0-D8 | PE-EINT13 | 3.3V |
| 7 | PE0 | CSI0-PCLK | PE-EINT1 | 3.3V |
| 8 | PE18 | CSI0-D14 | PE-EINT19 | 3.3V |
| 9 | PE16 | CSI0-D12 | PE-EINT17 | 3.3V |
| 10 | PE19 | CSI0-D15 | PE-EINT20 | 3.3V |
| J2 | Sinjaal | Beskriuwing | Alternative funksjes | IO Voltage |
| 11 | PE17 | CSI0-D13 | PE-EINT18 | 3.3V |
| 12 | PE8 | CSI0-D4 | PE-EINT9 | 3.3V |
| 13 | SDC0-DET | SD card detection | PF6/EINT6 | 3.3V |
| 14 | PE3 | CSI0-VSYNC | PE-EINT4 | 3.3V |
| 15 | GND | Grûn | 0V | |
| 16 | PE2 | CSI0-HSYNC | PE-EINT3 | 3.3V |
| 17 | SDC0-D0 | SD Data 0 | PF1/EINT1 | 3.3V |
| 18 | PE1 | CSI0-MCLK | PE-EINT2 | 3.3V |
| 19 | SDC0-D1 | SD Data 1 | PF0/EINT0 | 3.3V |
| 20 | SPI0_MOSI_1V8 | PC2/EINT2 | 1.8V | |
| 21 | SDC0-D2 | SD Data 2 | PF5/EINT5 | 0V |
| 22 | PE4 | CSI0-D0 | PE-EINT5 | 3.3V |
| 23 | SDC0-D3 | SD Data 3 | PF4/EINT4/ | 3.3V |
| 24 | PE5 | CSI0-D1 | PE-EINT6 | 3.3V |
| 25 | SDC0-CMD | SD Kommando sinjaal | PF3/EINT3 | 3.3V |
| 26 | PE7 | CSI0-D3 | PE-EINT8 | 3.3V |
| 27 | SDC0-CLK | SD Clock útfier | PF2/EINT2 | 3.3V |
| 28 | PE6 | CSI0-D2 | PE-EINT7 | 3.3V |
| 29 | GND | Grûn | 0V | |
| 30 | PE9 | CSI0-D5 | PE-EINT10 | 3.3V |
| 31 | EPHY-CLK-25M | UART4CTS/CLK-Fanout1 | PI16/EINT16/TS0-D7 | 3.3V |
| 32 | PE10 | CSI0-D6 | PE-EINT11 | 3.3V |
| 33 | RGMII-MDIO | UART4RTS/CLK-Fanout0 | PI15/EINT15/TS0-D6 | 3.3V |
| 34 | PE11 | CSI0-D7 | PE-EINT12 | 3.3V |
| 35 | RGMII-MDC | UART4-RX/PWM4 | PI14/EINT14/TS0-D5 | 3.3V |
| 36 | CK32KO | I2S2-MCLK/AC-MCLK | PG10/EINT10 | 1.8V |
| 37 | RGMII-RXCK | H-I2S0-DIN0/DO1 | PI4/EINT4/DMIC-D3 | 3.3V |
| 38 | GND | Grûn | 0V | |
| 39 | RGMII-RXD3 | H-I2S0-MCLK | PI0/EINT0/DMICCLK | 3.3V |
| 40 | PG-MCSI-SCK | I2C3-SCL/UART2-RTS | PG17/EINT17 | 1.8V |
| 41 | RGMII-RXD2 | H-I2S0-BCLK | PI1/EINT1/DMIC-D0 | 3.3V |
| 42 | PG-MCSI-SDA | I2C3-SDA/UART2-CTS | PG18/EINT18 | 1.8V |
| 43 | RGMII-RXD1 | RMII-RXD1/H-I2S0-LRCK | PI2/EINT2/DMIC-D1 | 3.3V |
| 44 | PE-TWI2-SCK | CSI0-SCK | PE20-EINT21 | 3.3V |
| 45 | RGMII-RXD0 | RMII-RXD0/H-I2S0-DO0/DIN1 | PI1/EINT1/DMIC-D2 | 3.3V |
| 46 | PE-TWI2-SDA | CSI0-SDA | PE21-EINT22 | 3.3V |
| 47 | RGMII-RXCTL | RMII-CRS/UART2TX/I2C0SCL | PI5/EINT5/TS0-CLK | 3.3V |
| 48 | BT-PCM-CLK | H-I2S2-BCLK/AC-SYNC | PG11/EINT11 | 1.8V |
| 49 | GND | Grûn | 0V | |
| 50 | BT-PCM-SYNC | H-I2S2-LRCLK/AC-ADCL | PG12/EINT12 | 1.8V |
| 51 | RGMII-TXCK | RMII-TXCK/UART3RTS/PWM1 | PI11/EINT11/TS0-D2 | 3.3V |
| 52 | BT-PCM-DOUT | H-I2S2-DO0/DIN1/AC-ADCR | PG13/EINT13 | 1.8V |
| J2 | Sinjaal | Beskriuwing | Alternative funksjes | IO Voltage |
| 53 | RGMII-TXCTL | RMII-TXEN/UART3CTS/PWM2 | PI12/EINT12/TS0-D3 | 3.3V |
| 54 | BT-PCM-DIN | H-I2S2-DO1/DIN0/AC-ADCX | PG14/EINT14 | 1.8V |
| 55 | RGMII-TXD3 | UART2-RTS/I2C1-SCL | PI7/EINT7/TS0SYNC | 3.3V |
| 56 | BT-UART-RTS | UART1-RTS/PLL-LOCK-DBG | PG8/EINT8 | 1.8V |
| 57 | RGMII-TXD2 | UART2-CTS/I2C1-SDA | PI8/EINT8/TS0DVLD | 3.3V |
| 58 | BT-UART-CTS | UART1-CTS/AC-ADCY | PG9/EINT9 | 1.8V |
| 59 | RGMII-TXD1 | RMII-TXD1/UART3TX/I2C2SCL | PI9/EINT9/TS0-D0 | 3.3V |
| 60 | BT-UART-RX | UART1-RX | PG7/EINT7 | 1.8V |
| 61 | RGMII-TXD0 | RMII-TXD0/UART3RX/I2C2SDA | PI10/EINT10/TS0-D1 | 3.3V |
| 62 | BT-UART-TX | UART1-TX | PG6/EINT6 | 1.8V |
| 63 | GND | Grûn | 0V | |
| 64 | GND | Grûn | 0V | |
| 65 | RGMII-CLKIN-125M | UART4-TX/PWM3 | PI13/EINT13/TS0-D4 | 3.3V |
| 66 | WL-SDIO-D0 | SDC1-D0 | PG2/EINT2 | 1.8V |
|
67 |
PHYRSTB |
RMII-RXER/UART2-RX/I2C0-S
DA |
PI6/EINT6/TS0-EER |
3.3V |
| 68 | WL-SDIO-D1 | SDC1-D1 | PG3/EINT3 | 1.8V |
| 69 | GND | Grûn | 0V | |
| 70 | WL-SDIO-D2 | SDC1-D2 | PG4/EINT4 | 1.8V |
| 71 | MCSI-MCLK | PWM1 | PG19/EINT19 | 1.8V |
| 72 | WL-SDIO-D3 | SDC1-D3 | PG5/EINT5 | 1.8V |
| 73 | GND | Grûn | 0V | |
| 74 | WL-SDIO-CMD | SDC1-CMD | PG1/EINT1 | 1.8V |
| 75 | PG-TWI4-SCK | I2C4-SCL/UART2-TX | PG15/EINT15 | 1.8V |
| 76 | WL-SDIO-CLK | SDC1-CLK | PG0/EINT0 | 1.8V |
| 77 | PG-TWI4-SDA | I2C4-SDA/UART2-RX | PG16/EINT16 | 1.8V |
| 78 | GND | Grûn | 0V | |
|
79 |
FEL |
Selektearje bootmodus:
Leech: download fan USB, Heech: fluch opstart |
3.3V |
|
| 80 | ALDO5 | PMU ALDO5 standert 1.8V útfier | Maksimum: 300mA | 1.8V |
| 81 | EXT-IRQ | Eksterne IRQ ynfier | OD | |
| 82 | BLDO5 | PMU ALDO5 standert 1.2V útfier | Maksimum: 500mA | 1.2V |
| 83 | PMU-PWRON | Ferbine mei Power Key | 1.8V | |
| 84 | GND | Grûn | 0V | |
| 85 | RTC-BAT | RTC batterij ynfier | 1.8-3.3V | |
| 86 | VSYS_3V3 | Systeem 3.3V útfier | Maksimum: 300mA | 3.3V |
| 87 | GND | Grûn | 0V | |
| 88 | DCDC6 | PMU DCDC6 út (standert 3V3) | Maksimum: 1000mA | 3.3V |
| 89 | SOC-RESET | Systeem Reset útfier | Ferbine mei RST kaai | 1.8V |
| 90 | DCDC6 | PMU DCDC6 út (standert 3V3) | Maksimum: 1000mA | 3.3V |
| 91 | GND | Grûn | 0V |
| J2 | Sinjaal | Beskriuwing | Alternative funksjes | IO Voltage |
| 92 | GND | Grûn | 0V | |
| 93 | DCIN | Main Power input | 3.4V-5.5V | |
| 94 | DCIN | Main Power input | 3.4V-5.5V | |
| 95 | DCIN | Main Power input | 3.4V-5.5V | |
| 96 | DCIN | Main Power input | 3.4V-5.5V | |
| 97 | DCIN | Main Power input | 3.4V-5.5V | |
| 98 | DCIN | Main Power input | 3.4V-5.5V | |
| 99 | DCIN | Main Power input | 3.4V-5.5V | |
| 100 | DCIN | Main Power input | 3.4V-5.5V | |
| Noat
1. J1 Pin87/89 (PC3/PC4) is Boot-SEL assosjearre, lûk asjebleaft gjin H of L. 2. PC / PG ienheid is 1.8V nivo standert, mar kin feroarje nei 3.3V. |
||||
Untwikkelingsset (EMT507)
Hardware Design Guide
Perifeare Circuit Reference
Eksterne macht
Debug Circuit
USB OTG Interface Circuit
HDMI Interface Circuit
Power Tree
B2B connector foar carrier board
Produkt elektryske skaaimerken
Dissipaasje en temperatuer
| Symboal | Parameter | Min | Typ | Max | Ienheid |
|
DCIN |
Systeem Voltage |
3.4 |
5 |
5.5 |
V |
|
VSYS_3V3 |
Systeem IO
Voltage |
3.3-5% |
3.3 |
3.3 + 5% |
V |
|
DCDC6_3V3 |
Perifeare
Voltage |
3.3-5% |
3.3 |
3.3 + 5% |
V |
|
ALDO5 |
Kamera IO
Voltage |
0.5 |
1.8 |
3.3 |
V |
|
BLDO5 |
Kamera Core
Voltage |
0.5 |
1.2 |
3.3 |
V |
|
Idcin |
DCIN
input Strom |
500 |
mA |
||
|
VCC_RTC |
RTC Voltage |
1.8 |
3 |
3.4 |
V |
|
Iirtc |
RTC ynfier
Aktueel |
TDB |
uA |
||
|
Ta |
Operating
Temperatuer |
-40 |
85 |
°C |
|
|
Tstg |
Storage Temperatuer |
-40 |
120 |
°C |
Betrouberens fan Test
| Hege temperatuer Operating Test | ||
| Ynhâld | Operearje 8h yn hege temperatuer | 55 ° C ± 2 ° C |
| Resultaat | TDB | |
| Operating Life Test | ||
| Ynhâld | Operearje yn keamer | 120h |
| Resultaat | TDB | |
Dokuminten / Resources
 |
Boardcon MINI507 Kosten Optimalisearre System Module [pdf] Brûkershânlieding T507, V1.202308, MINI507, MINI507 Kostenoptimalisearre systeemmodule, kostenoptimalisearre systeemmodule, optimalisearre systeemmodule, systeemmodule, module |
