TR5003B, TR5005B Transit Van Angled Shelf
“
Specifications:
- Product: Transit Van Angled Shelves
- Model Numbers: TR5003B + TR5005B
Product Usage Instructions:
Installation Guide:
Time to install this product: 30 minutes. Additional help is
suggested for a few of the install steps.
Before You Start:
Please inspect the product and packaging upon delivery to ensure
there are no issues and that all parts and hardware are accounted
for.
Contact us ASAP if anything is missing at: support@flatlinevanco.com
Package Contents:
- Angled Shelf – QTY: 1
Hardware:
- 1/4-20 x 0.5 Button Head Hex Drive Screw – QTY: 4
- 1/4-20 Cap Nut – QTY: 4
- #8 x 0.5 Round Head Phillips Drive Screw – QTY: 4
Step 01: Layout and Install Prep
1.1 Product Compatibility: The Angled Shelves
are designed to be installed alongside 24 or 48 FVC Upper Cabinets.
If installing to a different cabinet or structure, ensure proper
fitment.
1.2 Mark Drill Holes: Dry-fit the Angled Shelf
to the side of your Cabinet, align contours, and mark drilling
holes.
1.3 Drill Out Holes: Drill holes using a 3/16
drill bit.
Step 02: Install Angled Shelf
2.1 Install Shelf to Cabinet: Use (4) 1/4 x 0.5
Button Head Hex Drive Screws and Cap Nuts to secure the Angled
Shelf to the Cabinet.
2.2 Secure Shelf to Van: Finish by driving (4)
#8 x 0.5 Round Head Phillips Drive Screws through the mounting
holes.
FAQ:
Q: How long does it take to install the Transit Van Angled
Shelves?
A: It takes approximately 30 minutes to install the Angled
Shelves. Additional help may be needed for some steps.
Q: What tools are required for installation?
A: Tools required include a power drill, impact driver, Phillips
head bit, 9/32 drill bit, and a 7/16 wrench or socket.
“`
INSTALLATION GUIDE
TRANSIT VAN ANGLED SHELVES
TR5003B + TR5005B
TOOLS REQUIRED (NOT INCLUDED)
+ 9/32″ DRILL BIT + POWER DRILL + IMPACT DRIVER + PHILLIPS HEAD BIT + 7/16″ WRENCH OR SOCKET
INSTALL INFO
TIME TO INSTALL THIS PRODUCT: 30 MINUTES Additional help is suggested for a few of the install steps.
BEFORE YOU START
Please inspect the product and packaging upon delivery to ensure there are no issues and that all parts and hardware are accounted for.
Contact us ASAP if anything is missing at: support@flatlinevanco.com
FL ATLINE VAN CO · SUPPORT@FL ATLINEVANCO.COM · 888-667-5576
01
BEFORE YOU START
All Flatline Van Co products must be properly assembled and secured before attaching to your vehicle. Improper attachment could result in an automobile accident, and could cause serious bodily injury or death to you or to others involved. You are responsible for assembling and securing Flatline Van Co products to your vehicle, checking the mounting points and attachments prior to use, and regularly inspecting the products for wear and or damage. We always recommend you use a professional to install any aftermarket accessories to your vehicle. If you have no mechanical experience and are not thoroughly familiar with the installation procedures, you must have the product installed by a professional installer or other qualified persons. The responsibility is yours and must be taken seriously for everyone’s safety.
FL ATLINE VAN CO · SUPPORT@FL ATLINEVANCO.COM · 888-667-5576
02
PACKAGE CONTENTS
ANGLED SHELF
QTY: 1
FL ATLINE VAN CO · SUPPORT@FL ATLINEVANCO.COM · 888-667-5576
03
HARDWARE
1/4-20 X 0.5 BUTTON HEAD HEX DRIVE SCREW
QTY: 4
1/4-20 CAP NUT
QTY: 4
#8 X 0.5 ROUND HEAD PHILLIPS DRIVE SCREW
QTY: 4
FL ATLINE VAN CO · SUPPORT@FL ATLINEVANCO.COM · 888-667-5576
04
TOOLS REQUIRED FOR THIS STEP:
STEP | 01 LAYOUT AND INSTALL PREP
1.1 Product Compatibility: The Angled Shelves are designed to be installed alongside 24″ or 48″ FVC Upper Cabinets. If you are planning to install these to a Cabinet or Structure other than an FVC Cabinet, make sure to dry-fit and double check your fitment before proceeding.
FIG 1
FIG 2
FL ATLINE VAN CO · SUPPORT@FL ATLINEVANCO.COM · 888-667-5576
05
TOOLS REQUIRED FOR THIS STEP:
+ +
POWER DRILL 9/32″ DRILL BIT
STEP | 01 LAYOUT AND INSTALL PREP
1.2 Mark Drill Holes: Dry-fit the Angled Shelf to the side of your Cabinet, ensuring that the contours along the back edge are aligned, and mark the holes for drilling (FIG 3).
1.3 Drill Out Holes: Drill out holes using a 3/16″ Drill Bit.
FIG 3
FIG 4
FL ATLINE VAN CO · SUPPORT@FL ATLINEVANCO.COM · 888-667-5576
06
TOOLS REQUIRED FOR THIS STEP: + 5/32″ ALLEN WRENCH
+ 7/16″ WRENCH OR SOCKET
STEP | 02 INSTALL ANGLED SHELF
2.1 Install Shelf to Cabinet: Use (4) 1/4 x 0.5 Button Head Hex Drive Screws and Cap Nuts to install the Angled Shelf to the Cabinet (FIG 5+6).
FIG 5
FIG 6
FL ATLINE VAN CO · SUPPORT@FL ATLINEVANCO.COM · 888-667-5576
07
TOOLS REQUIRED FOR THIS STEP: + IMPACT DRIVER
+ PHILLIPS HEAD BIT
STEP | 02 INSTALL ANGLED SHELF
2.2 Secure Shelf to Van: Finish the install by driving (4) #8 X 0.5 Round Head Phillips Drive Screw through the mounting holes shown in FIG 7.
FIG 7
FIG 8
FL ATLINE VAN CO · SUPPORT@FL ATLINEVANCO.COM · 888-667-5576
08
GET OUT AND EXPLORE!
+ LEAVE US A REVIEW
Happy with your new FVC product? We would love to hear (and see) from you! Head to the product page and click “Leave Review.” Add a short review and upload a few photos to be showcased on the product page.
+ SHARE YOUR PICS
We love seeing how our customers use their FVC products and following along with your adventures. Tag us in your photos with: @flatlinevanco or send them to us via email. We love posting customer pictures in our feed!
+ NEED ANY HELP?
If you are having any issues with your product, please reach out, and we will make it right. FVC is a company of van and outdoor enthusiasts that design and use our own products, so we want you to be as stoked on your new parts as we are!
@FLATLINEVANCO
FL ATLINE VAN CO · SUPPORT@FL ATLINEVANCO.COM · 888-667-5576
09
Documents / Resources
 |
FVC TR5003B, TR5005B Transit Van Angled Shelf [pdf] Installation Guide TR5003B, TR5005B, TR5003B TR5005B Transit Van Angled Shelf, TR5003B TR5005B, Transit Van Angled Shelf, Van Angled Shelf, Angled Shelf, Shelf |