Contents
hide
F3 Series Fuse Box Consumer Unit
“
Product Information
Specifications:
- Model: F3
- Current Rating: 100A
- Standard: IT1002 IEC/EN 60947-3
- Operating Voltage: 230V~
Product Usage Instructions
Installation:
- Ensure the power source is switched off before
installation. - Connect the L and N wires according to the provided
diagram. - Make sure all connections are secure before turning on the
power.
Operation:
- To turn the device on/off, use the designated switch.
- Check the voltage input matches the specifications of the
product.
Maintenance:
- Regularly inspect for any signs of damage or wear.
- Keep the product clean and free from dust or debris.
FAQ (Frequently Asked Questions)
Q: What should I do if the product does not turn on?
A: Check the power source, connections, and ensure the switch is
in the correct position.
Q: Can this product be used with a different voltage?
A: No, this product is designed for use with a 230V~ power
source as specified.
Q: Is professional installation required?
A: It is recommended to have the product installed by a
qualified electrician to ensure safety and proper function.
“`
F3
L
N
S
®
100A
IT1002 IEC/EN 60947-3
OFF
230V~ 13 24
OFF
L
N
2.0Nm E E 12 11 10 9 8 7 6 5 4 3 2 1 E 11 10 9 8 N 7 6 5 4 N N N 3 2 1 N
RTA800302
RTA800302
L
N
S
®
100A
IT1002
IEC/EN 60947-3
OFF
230V~ 13 24
OFF
L
N
Documents / Resources
 |
Fuse Box F3 Series Fuse Box Consumer Unit [pdf] User Guide IT1002, RTA800302, F3 Series Fuse Box Consumer Unit, F3 Series, Fuse Box Consumer Unit, Box Consumer Unit, Consumer Unit |