CST350 Plus PC Case
User Guide
CST350 Plus PC Case
| 1. Front Panel 4. Left HDD / Fan Bracket 7.ATX PSU Bracket |
2 Bottom Plate 5. Side Cover 8. Top Cover |
3. HDD / Fan Bracket 6. Micro-PSU Bracket |
Specification
| Model | CST350 Plus | |
| Type | Micro ATX | |
| Color | Black | |
| Materials | 0.8mm SPCC | |
| Weight | NW: 5.2kg | |
| Dimensions (D x W x H) | 391x185x303mm | |
| MotherBoard Support | Micro ATX or Mini-ITX | |
| External I/O port | USB3.0 x 2. USB Type-C, HD Audio | |
| Maximum CPU Cooler Height | Vertical VGA: 88mm Without vertical VGA and fan bracket: 155mm |
|
| VGA Card Length | Vertical VGA w i t h ATA PSU: 245mm Vertical VGA with SFX PSU: 320mm Horizontal VGA with ATX PSU: 320mm |
|
| Expansion Slots | 4 | |
| Dust Filters | Top/Side/Bottom | |
| Power Supply Type | ATX or SFX-L | |
| Drive Bay | 3.5″ HDD | 3 |
| 2.5″ SSD | 3 | |
| Fan&Water Cooler Support | Top | 120mm x 2 . 120mm x 1 with ATX PSU |
| Side | 120mm x 2 or 240mm Radiator(ITX+Horizontal VGA) | |
| Bottom | 120mm x 2 or 240mm Radiator(ITX+Vertical VGA) | |
| Rear | 80mm x 1(without Vertical VGA) | |
| Fan & Radiator | Preinstall Fan | Top: 12cmx1; Rear: 8cmx1 |
| Max Radiator Support | 240mm(Only ITX motherboard) | |
Accessory
Side Panel Disassembly
 Remove screws on rear plate, then open to pand bottom plate |
 Unscrew to remove HDD/Fan bracket and the side bracket |
MATA Installation Plan – MB Installation
MATA Installation Plan – ATX PSU Installation
MATA Installation Plan – Installation of SFX PSU
Putin gaskets be fore fixing
HDD/SODD with step screws
(Fix SSD with 2.5″ SSD screws)
(Fix HOD with 3.5″ HDD screws)
 |
 |
ITX Installation Plan – MB Installation
ITX Mother Board Installation Plan – ATX PSU Installation
ITX Installation Plan – Installation of Micro PSU®
Put in gaskets before fixing
HDD/SDD with step screws
(Fix SSD with 2.5″ SSD screws)
( Fix HDD with 3.5″ HDD screws)
 |
 |
ITX Installation Plan – Installation of Micro PSU @
Max. CPU Cooler Height
Installation of Graphic Card
Length Limitation of Vertical GPU Installation
ITX Motherboard Installation
Plan – Max GPU Length
With Micro PSU, 335mm
(When Micro PSU fixed t o MB Tray)
Installation of Vertical GPU
Installation of HDD on HDD / Fan Bracket
 |
 |
| Get SSD/HDD and the bracket ready | Put the SSD/HDD to the bracket on the side with lifted edge |
 |
 |
| Fix with screws (HDD screws for HDD) (MB screws for SSD) | Fix it back t o the top/bottom of chassis (Only support HDD*1 on top when with ATX PSU) |
Installation of HDD / SSD on left fan Bracket
 |
 |
| Get SSD/HDD and the bracket ready | Put the SSD/HDD to the bracket on the side with lifted edge |
 |
 |
| Fix with screws (HDD screws for HDD) (MB screws for SSD) | Fix it back to the side of chassis (Only support HDD*1 on top when with ATX PSU) |
Installation of Double SDD inside of Front Plate
Installation of Water Cooler on HDD / Fan Bracket (Supports only at the bottom
 |
 |
| Fix 240/120 water cooler t o the bracket as shown on the picture | Fix bracket back i n t o the bottom of chassis (Only supports water cooler installation on the bottom plate with vertical GPU and ITX mother board} |
Installation of Rear Plate Fans
Installation of Fans on HDD / Fan Bracket (Top)
(Supports 2s:12cm fan with Micro PSU, Support 1’12cm fan with ATX PSU)
Installation of fans on HDD / Fan Bracket (Bottom)
 |
 |
| Fix 12cm fans t o the bracket (Air inflow from the bottom) | Fix the bracket back into the chassis |
Installation of Fans on HDD / Fan Bracket (Left Side)
(Supports 1°12cm fans when using ATX PSU; doesn’t support HOD when fans are installed)
 |
 |
| Fix 12cm fans to the bracket ( Air inflow from the left side) | Fix the bracket back into the chassis |
Documents / Resources
 |
FSP CST350 Plus PC Case [pdf] User Guide CST350 Plus, PC Case, CST350 Plus PC Case, Computer Case, PC Desktop Case, Personal Computer Case |
