FROST 1085 Console Table Set
INSTRUCTION MANUAL
The FROST Denmark Console Table Set (1085, 2085 & 3085) is a stainless-steel console with a natural-stone countertop. The set includes console legs and a countertop, designed by Bønnelycke MDD, with adjustable feet for leveling.
Finishes (table set model 3085 — Oriental White tabletop & console legs): Matt Black / Brushed Stainless (T3085-BB), Matt Black / Brushed Copper (T3085-BBOC), Matt Black / Brushed Gold (T3085-BBMG), Matt Black / Brushed Black (T3085-BBCB), Matt White / Brushed Stainless (T3085-BW), Matt White / Brushed Copper (T3085-WBOC), Matt White / Brushed Gold (T3085-WBMG), Matt White / Polished Stainless (T3085-PW).
Finishes (table set model 2085 — Van Gogh Grey tabletop & console legs): Matt Black / Brushed Stainless (T2085-BB), Matt Black / Brushed Copper (T2085-BBOC), Matt Black / Brushed Gold (T2085-BBMG), Matt Black / Brushed Black (T2085-BBCB), Matt White / Brushed Stainless (T2085-BW), Matt White / Brushed Copper (T2085-WBOC), Matt White / Brushed Gold (T2085-WBMG), Matt White / Polished Stainless (T2085-PW).
Finishes (table set model 1085 — Forest Green tabletop & console legs): Matt Black / Brushed Stainless (T1085-BB), Matt Black / Brushed Copper (T1085-BBOC), Matt Black / Brushed Gold (T1085-BBMG), Matt Black / Brushed Black (T1085-BBCB), Matt White / Brushed Stainless (T1085-BW), Matt White / Brushed Copper (T1085-WBOC), Matt White / Brushed Gold (T1085-WBMG), Matt White / Polished Stainless (T1085-PW).
Quick Guide (Setup & Use)
- Assemble the console legs: Connect all bars as illustrated, aligning all joints. Tighten set screws with the 2.5 mm hex key only lightly at first so adjustments can still be made until the frame stands straight and stable.
- Level using adjustable feet: Adjust the feet if needed to achieve a stable installation.
- Prepare for wall mounting: Make sure to screw in the two M8 center bolts as illustrated prior to mounting the countertop.
- Mount the console on the wall: Position the assembled console against the wall at the desired height. Use the two horizontal bars to mark drilling positions. Drill holes with a 6 mm drill bit, insert two Ø6×30 wall plugs, and fasten the brass inserts with the two enclosed Ø4×50 screws using a Phillips screwdriver (PH2). Lift the console back onto the brass inserts and secure it with set screws using the 2.5 mm hex key. Before fully tightening, verify the console is level and aligned by adjusting the feet.
- Install countertop support bracket: Install the support bracket using four enclosed Ø6×30 wall plugs and four Ø4×30 screws as illustrated. Use a laser level to mark the height before installation.
- Mount the countertop: Carefully place the countertop onto the center bolts and the support bracket so the holes align. Secure using the two enclosed M5×12 bolts as illustrated (use a screwdriver).
- Cleaning & daily care: Daily cleaning: warm water and mild soap. For stubborn stains: use a stone cleaner. Protect against grease and liquids by applying a neutral impregnator before use.
- Ready to use: The set is ready for use.
DESIGNED BY BØNNELYCKE MDD
PRODUCT DETAILS, TECHNICAL DETAILS AND FITTING INSTRUCTIONS
MATERIAL: STAINLESS STEEL & NATURAL STONE SET INCLUDING: CONSOLE LEGS & COUNTERTOP AVAILABLE IN COMBINATIONS OF THE FROST FINISHES
ASSEMBLING THE CONSOLE LEGS
1. Assemble the Console by connecting all the bars as illustrated, ensuring that all joints are properly aligned. Tighten all the set screws with the 2.5 mm hex key only lightly at first, so adjustments can still be made until the frame stands straight and stable.
The Console includes adjustable feet, so make sure to adjust these if needed to achieve a stable installation.
*Included in the box, but not to be used for this setup: two triangular mounting brackets and four M6×30 bolts.
MOUNTING OF CONSOLE LEGS ON THE WALL
2. Position the assembled Console against the wall at the desired height. Use the two horizontal bars as reference points to mark the drilling positions on the wall.
Drill the holes with a 6 mm drill bit and insert two Ø6×30 wall plugs. Fasten the brass inserts to the wall using the two enclosed Ø4×50 screws using a Phillips screwdriver with a PH2 bit. Lift the Console back into position onto the two brass inserts and secure it with the set screws using the 2.5 mm hex key.
Before fully tightening all the set screws, verify that the Console is level and correctly aligned by adjusting the feet.
Make sure to screw in the two M8 center bolts as illustrated prior to mounting the countertop.
3. Install the support bracket for the Countertop by using four enclosed Ø6×30 wall plugs and four Ø4×30 screws as illustrated.
Use a laser level to mark the height of the support bracket before installation.
Support bracket measurements:
MOUNTING OF COUNTERTOP
4. Carefully place the Countertop onto the center bolts and the support bracket, ensuring that the holes in both the bracket and the Countertop align. Use the two enclosed M5x12 bolts to secure the Countertop as illustrated.
Please use a screwdriver to secure the bolts.
COUNTERTOP INFORMATION
The Countertops come in three natural stone variations: Forest Green, Van Gogh Grey, and Oriental White. As a natural material, colour, veining, and surface texture will vary. Each piece is unique, and minor irregularities are not considered defects.
For daily cleaning, use warm water and mild soap. For stubborn stains, a stone cleaner is recommended. To protect the surface from grease and liquids, apply a neutral impregnator before use.
8. The Wash Table Set is now ready for use.
ADDITIONAL SHELF 1944-1000
Shelf 1944-1000 can be bought separately for extra storage space for toiletries, towels, and other everyday bathroom items.
FINISH OVERVIEW
CONSOLE TABLE SET 3085
Oriental White tabletop & console legs Natural stone / Stainless Steel Design: Bønnelycke MDD
Matt Black / Brushed Stainless T3085-BB
Matt Black / Brushed Copper T3085-BBOC
Matt Black / Brushed Gold T3085-BBMG
Matt Black / Brushed Black T3085-BBCB
Matt White / Brushed Stainless T3085-BW
Matt White / Brushed Copper T3085-WBOC
Matt White / Brushed Gold T3085-WBMG
Matt White / Polished Stainless T3085-PW
CONSOLE TABLE SET 2085
Van Gogh Grey tabletop & console legs Natural stone / Stainless Steel Design: Bønnelycke MDD
Matt Black / Brushed Stainless T2085-BB
Matt Black / Brushed Copper T2085-BBOC
Matt Black / Brushed Gold T2085-BBMG
Matt Black / Brushed Black T2085-BBCB
Matt White / Brushed Stainless T2085-BW
Matt White / Brushed Copper T2085-WBOC
Matt White / Brushed Gold T2085-WBMG
Matt White / Polished Stainless T2085-PW
CONSOLE TABLE SET 1085
Forest Green tabletop & console legs Natural stone / Stainless Steel Design: Bønnelycke MDD
Matt Black / Brushed Stainless T1085-BB
Matt Black / Brushed Copper T1085-BBOC
Matt Black / Brushed Gold T1085-BBMG
Matt Black / Brushed Black T1085-BBCB
Matt White / Brushed Stainless T1085-BW
Matt White / Brushed Copper T1085-WBOC
Matt White / Brushed Gold T1085-WBMG
Matt White / Polished Stainless T1085-PW
CLEANING AND MAINTENANCE
Surfaces should be cleaned with a microfiber cloth, glass cleaner or other non abrasive and gentle agents.
ATTENTION:
Never use solvents or aggressive household cleaners like bleach, acids (e.g. descalers) or ammonia-based bathroom cleaner to clean the product. Steel wool and hard brushes can permanently damage the surface of the steel.
EXCLUSION OF LIABILITY
FROST accepts no liability whatsoever for damage to persons or property that occurs or has occurred as a result of improper installation or maintenance, particularly if the safety instructions and other points to note listed are not or have not been observed in full.
WARNING AND HAZARD NOTICES
Improper mounting or use can lead to accidents and serious injuries.
www.frostdenmark.com
Bavne Alle 32, 8370 Hadsten, Denmark
E-mail: info@frost.dk • Phone: (+45) 87 61 00 32
We are also to be found as frostdenmark on Facebook, Instagram, Pinterest and LinkedIn
Troubleshooting
- Console not stable / not level: During initial assembly, tighten set screws only lightly so adjustments can be made. After wall mounting, verify the console is level and correctly aligned; adjust the adjustable feet before fully tightening set screws.
- Difficulty aligning countertop holes: Ensure the countertop is placed so the holes in the support bracket and the countertop align before securing with the M5×12 bolts.
- Stains or grease marks on stone surface: For stubborn stains, use a stone cleaner. For long-term protection against grease and liquids, apply a neutral impregnator before use.
- Damaged or harmed steel surface from cleaning: Do not use solvents or aggressive household cleaners (e.g., bleach, acids/descalers, ammonia-based bathroom cleaners). Avoid steel wool and hard brushes, which can permanently damage the steel surface.
Specifications
| Product | Console Table Set (1085, 2085 & 3085) |
| Designer | Bønnelycke MDD |
| Materials | Stainless steel & natural stone |
| Set includes | Console legs & countertop |
| Adjustability | Console includes adjustable feet |
| Countertop stone variations | Forest Green, Van Gogh Grey, Oriental White |
| Notes on natural stone | Colour, veining, and surface texture vary; each piece is unique; minor irregularities are not considered defects |
FAQ
What material is the Console Table Set made from?
It is made from stainless steel and natural stone.
What should I do before fully tightening the console set screws?
Verify that the console is level and correctly aligned by adjusting the adjustable feet, then fully tighten the set screws.
How should I clean the countertop daily?
Use warm water and mild soap for daily cleaning.
What should I do for stubborn stains on the natural stone countertop?
Use a stone cleaner is recommended for stubborn stains.
Documents / Resources
 | 1085 Console Table Set |
References
- FROST | Completing Architecturewww.frostdenmark.com
- User Manualmanual.tools