Froggys Fog Quart Machine Cleaner

Specifications

• Model: Fog Machine X1000
• Power: 1200W
• Tank Capacity: 1 liter
• Dimensions: 12″ x 8″ x 6″
• Weight: 5 lbs

Product Usage Instructions

Cleaning Your Fog Machine

Fog Machine Cleaning Procedures:

Turn the Machine OFF

1. Once it has cooled, pour all residual fluid out of the fluid tank into a catch bottle. (No need to waste perfectly good fog fluid.)
2. Rinse out your fluid tank with distilled water

Pour 1 Cup of Distilled water into the tank

1. Turn the machine ON
2. After the machine has heated up to the proper temperature, run the machine until almost all the distilled water is used up
3. Then turn the Machine OFF
4. Rinse the fog fluid tank one last time with distilled water

Storage Instructions

Store in a climate-controlled area on a level surface. Always store your fog machine with a small amount of fog fluid in the lines and never vinegar. Remember that fog machines are electronic devices and should be stored in a dry area.

FAQ

• Q: How often should I clean my fog machine?
• A: It is recommended to clean your fog machine after every 20-30 hours of use to maintain optimal performance.
• Q: Can I use regular water instead of distilled water for cleaning?
• A: It is highly recommended to use distilled water for cleaning to prevent mineral deposits that may affect the machine’s functionality.

INTRODUCTION

Fog machines do require cleaning from time to time no matter what fog fluid or machine you might use. It is in the best interest of the fog machine to set up a scheduled time for cleaning. We recommend cleaning your machine after every 80-100 hours of use and prior to any long-term storage. Doing so will greatly increase the reliability of your fog machine and will make sure that you are not left without fog in the middle of your event. If you take care of your fog machine, it will take care of you!

Fog Machine Cleaning Procedures

1. Turn the Machine OFF
   1. Once it has cooled, pour all residual fluid out of the fluid tank into a catch bottle. (No need to waste perfectly good fog fluid.)
   2. Rinse out your fluid tank with distilled water
2. Pour 1 Cup of Distilled water into the tank
   1. Turn the machine ON
   2. After the machine has heated up to the proper temperature, run the machine until almost all the distilled water is used up
   3. Then turn the Machine OFF
   4. Rinse the fog fluid tank one last time with distilled water
3. Pour 1 cup of Froggy Fully Clean – Fog Machine Cleaner into the tank
   1. Turn the machine ON
   2. After the machine has heated up to the proper temperature, run the machine until almost all the fluid is used up
   3. Turn the Fog Machine OFF
   4. Empty the remaining Fog Machine Cleaner from the fog fluid tank
   5. Rinse the fluid tank with distilled water
4. Pour 1 Cup of Distilled water into the tank
   1. Turn the machine ON
   2. After the machine has heated up to the proper temperature, run the machine until almost all the distilled water is used up
   3. Then turn the Machine OFF
   4. Rinse the fog fluid tank one last time with distilled water
5. THE MOST IMPORTANT STEP
   1. Put a small amount of fog fluid in the fluid tank
   2. Turn the machine ON
   3. After the machine has heated up to the proper temperature, run the machine until several (5-10) good bursts of fog complete
   4. Turn Machine OFF
6. Store in a climate-controlled area on a level surface. Always store your fog machine with a small amount of fog fluid in the lines and never vinegar. Remember that fog machines are electronic devices and should be stored in a dry area.

Contact

Froggys Fog at

• 615-469-4906
• Sales@FroggysFog.com

Documents / Resources

Froggys Fog Quart Machine Cleaner [pdf] Instructions Quart Machine Cleaner, Machine Cleaner, Cleaner

References

• User Manual