FrigeluX RETT136A Built In Refrigerator User Manual

They contain important information for safe use, for installation and for maintenance of the appliance. Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance.
Notes, which are important for your safety or the proper functioning of the appliance, are stressed with a warning triangle and or with signal words (Warning! Caution! Important!). Please observe the following.

GENERAL SAFETY INSTRUCTIONS

For your safety and correct usage, before installing and first using the appliance, read this user manual carefully, including its hints and warnings.
To avoid unnecessary mistakes and accidents, it is important to make sure that all people using the appliance are thoroughly familiar with its operation and safety features.

Remember these instructions and be sure that they remain with the appliance if it is moved or sold so that anyone using it throughout their life will be properly informed on its usage and safety notices.
For the safety of life and property, keep the precautions of these user’s instructions as the manufacturer is not responsible for damages caused by omission.

Safety of children and other vulnerable persons

This appliance can be used by children aged 8 years and above and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
User cleaning and servicing operations should not be carried out by children, unless they are more than 8 years old and are supervised.
Keep all packaging away from children as there is a risk of suffocation.
Risk of child entrapment. Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous, even if they will “just sit in the garage a few days”.
If you are discarding the appliance, pull the plug out of the socket, cut the connection cable (as close to the appliance as you can) and remove the door to prevent children from suffering an electric shock or from closing themselves inside it.
If this appliance, featuring a magnetic door seal, is to replace an older appliance having a spring lock (latch) on the door or lid, be sure to make the spring lock unusable before you discard the old appliance.
This will prevent it from becoming a death trap for a child.
Keep the appliance and its power cable out of reach of children less than 8 years old.
Before you throw away your old wine cooler, take off the door. Leave the shelves in place so that children may not easily climb inside.
Children from 3 to 8 are allowed to load and unload the appliance.

General safety

WARNING: This appliance is intended to be used in the household.
WARNING: Do not store explosive substances, such as aerosol cans with a flammable propellant, in this appliance.
WARNING: If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

WARNING: Keep ventilation openings in the appliance enclosure or the built-in structure clear of obstruction.
WARNING: Do not damage the refrigerant circuit.
WARNING: Do not use electrical appliances inside the compartments of the appliance unless they are of the type recommended by the manufacturer.

WARNING: The refrigerant and insulation-blowing gas are flammable. When disposing of the appliance, do so only at an authorized waste disposal center. Do not expose to flame.

Refrigerant

The refrigerant isobutene (R600a) is contained within the refrigerant circuit of the appliance, a natural gas with a high level of environmental compatibility, which is nevertheless flammable.

During transportation and installation of the appliance, ensure that none of the components of the refrigerant circuit become damaged. The refrigerant (R600a) is flammable.

Caution: Risk of fire

If the refrigerant circuit should be damaged.

Avoid opening flames and sources of ignition.
Thoroughly ventilate the room in which the appliance is situated.
It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short circuit, fire, and/or electric shock.

Electrical safety

We cannot be held responsible for any incident caused by poor electrical installation. The power cord must not be lengthened.
Make sure that the power plug is not crushed or damaged. A crushed or damaged power plug may overheat and cause a fire.

Make sure that you can access the main plug of the appliance.
Do not pull the main cable.
If the power plug socket is loose, do not insert the power plug. There is a risk of electric shock or fire.

You must not operate the appliance without the interior lighting lamp cover.
The appliance is only applied with a power supply of single-phase alternating current of 220~240V/50Hz.
The device uses a wall socket earthed according to current recommendations.

If the power cable is damaged, do not proceed with its replacement but contact your after-sales service.
The socket must be readily accessible but out of reach of children. If unsure, contact your installer.
When positioning the appliance, ensure that the cord is not trapped or damaged.

Daily use

WARNING: Refrigerating appliances without 4 stars are not suitable for freezing foodstuffs.
Do not store flammable gas or liquids in the appliance. There is a risk of an explosion.

Do not operate any electrical appliances in the appliance (e.g. electric ice cream makers, mixers, etc.).
Never place bottles or jars containing liquids in the refrigerator unless they are filled at 2/3 of the way; freezing expands liquids, and the container may explode.
When unplugging, always pull the plug from the mains socket. Do not pull on the cable.

Do not place the appliance in direct sunlight.
Keep burning candles, jumps and other items with naked flames away from the appliance so that do not set the appliance on fire.
This refrigerating appliance is intended to be used as a free-standing and built-in appliance.

The appliance is intended for keeping foodstuffs.
The appliance is heavy. Care should be taken when moving it.
If your machine has wheels, remember that they are only used to facilitate small movements. Do not move it on longer journeys.

Never use the base, drawers, doors, etc., to stand on or as supports.
To avoid items falling and causing injury or damage to the appliance, do not overload the door racks or put too much food in the crisper drawers.

Caution! Care and cleaning

Before maintenance, switch off the appliance and disconnect the mains plug from the mains socket.
Do not clean the appliance with metal objects, steam cleaners, ethereal oils, organic solvents or abrasive cleansers.
Do not use sharp objects to remove frost from the appliance. Use a plastic scraper.

Installation Important!

For electrical connection, carefully follow the instructions given in this manual.
Unpack the appliance and check if there is damage to it. Do not connect the appliance if it is damaged. Report possible damage immediately to the place where you bought it. In this case, retain packing.

It is advisable to wait at least 24 hours before connecting the appliance to allow the oil to flow back into the compressor.
Adequate air circulation should be around the appliance; lacking this leads to overheating. To achieve sufficient ventilation, follow the instructions relevant to installation.
Wherever possible, the back of the product should not be too close to a wall to avoid touching or catching warm parts (compressor, condenser) to prevent the risk of a fire. Follow the instructions relevant to installation.

The appliance must not be located close to radiators or cookers.
Make sure that the mains plug is accessible after the installation of the appliance.

ENERGY SAVINGS

To reduce the power consumption of your device:
Install it in a suitable location (see “Installing your appliance”).
Keep the doors open for as short a time as possible.

Do not put hot food into your device.
Ensure the optimal functioning of your device by periodically cleaning the condenser (see “Routine maintenance of your appliance”).
Ensure the optimal functioning of your device by not allowing too much frost to accumulate in the refrigerator (defrost it when the frost thickness exceeds 5-6 mm).

Periodically check the door seals and make sure they always close effectively. If this is not the case, please contact your after-sales service.

Service

Any electrical work required to do the servicing of the appliance should be carried out by a qualified electrician or competent person.

This product must be serviced by an authorized Service Center, and only genuine spare parts must be used.
This appliance is for domestic use only. The manufacturer cannot be held responsible for another use.
Aesthetic and functional spare parts per REGULATION (EU) 2019/2019 (Annex II, point 3.), are available for after sales service network and end users for a maximum period of 7 or 10 years (List on Annex II, point 3.a.1 et 3.a.2) from the date of end of commercialization on the market of the last unit. The list of spare parts and the procedure for ordering them (professional access / end user access) are available on the following website: www.interfroidservices.fr or by post at the following address:

Interfroid Services, 123 Route du Chêne – 72230 ARNAGE.
For other functional spare parts not specified in EU regulation 2019/2019, they are available for a period of 7 years.
The manufacturer’s warranty is 1 year for functional parts.

R600a Safety regulation

Warning: Do not use mechanical devices or other means to accelerate the defrosting process other than those recommended by the manufacturer.
Warning: Keep ventilation openings in the appliance enclosure or the structure clear of obstruction.

Do not store explosive substances such as aerosol cans with a flammable propellant, in this appliance.
Warning: Do not damage the refrigerant circuit.
Refrigerating units operating on Isobutane (R600a) may not be placed in an area with sources of ignition (e.g. unsealed electrical contacts) or where the refrigerant could gather in the event of a leak.

The type of refrigerant is indicated on the cabinet’s type plate.
Warning: Do not use electrical appliances inside the compartments of the appliance unless they are of the type recommended by the manufacturer.
The appliance meets the requirements of all European Directives and their modifications.

PRODUCT DESCRIPTION

RETT136A:

1	Control panel
2	Carbon filter
3	Air duct plate
4	Shelf
5	Lock
6	Ventilation grille
7	Lower hinge
8	Handle
9	Foaming door
10	Door gasket
11	Upper hinge

RE2T136A:

1	Control panel
2	Upper drawer
3	Upper drawer divider
4	Upper handle
5	Upper foaming door
6	Lower drawer
7	Lower drawer divider
8	Lower foaming door
9	Ventilation grille

To find out more about your product, consult the online EPREL database.

As defined in Commission Delegated Regulation (EU) 2019/2016, all information relating to this refrigeration appliance is available on the EPREL Base (European Product Database for energy labeling).
This database enables you to consult the information and technical documentation of your refrigeration appliance.
You can access the EPREL Database by scanning the QR code on the energy label of your appliance or by going directly to: www.ec.europa.eu and searching the reference of your refrigeration appliance.

Anti-vibration system (depending on the model):

The refrigeration compressor is equipped with special dampers (silent blocks), and the inner space is insulated from the body by a thick layer of polyurethane foam.
These characteristics prevent the transmission of vibration to your appliance.

The rating label:

The rating label is located inside, at the bottom of your appliance, on the back wall (depending on the model), or on the left wall (depending on the model).
To remove the drawers, refer to chapter “4”, which explains how to remove the drawer from model RE2T136A.

INSTALLATION INSTRUCTIONS

Location

When selecting a location for your appliance, you should make sure the floor is flat and firm, and the room is well ventilated. An average ambient temperature must be observed. This temperature is specific according to the climatic class of the device:

SN: This refrigerating appliance is intended to be used at ambient temperatures ranging from 10 °C to 32 °C

N: This refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 32 °C
ST: This refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 38 °C
N: This refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 43 °C

Your appliance is a N-ST class.
Avoid location near a heat source, e.g. cooker, boiler or radiator. Also, avoid direct sunlight in outbuildings or terraces/outside seating areas.
If you are placing your appliance in an outbuilding such as a garage or annex, ensure that it is placed above the damp course, otherwise, condensation will occur on the cabinet.

Never place the appliance in a wall recess or into fitted cabinets or furniture when it is working; the metal grid at the back may become hot and the sides warm.
Never place the Fridge in a wall recess or into fitted cabinets or furniture when your Fridge is working; the grille at the back may become hot and the sides warm.
It must therefore be installed so that the back of the Fridge has at least 10 cm of free space and the sides have 10 cm. Do not drape the Fridge with any covering.

Please follow the below diagram for built-in installation:

Recommendation combination:

The following combination of drawers, baskets, and shelves is recommended for energy to be used as efficiently as possible by the refrigeration unit.

Leveling the fridge

If the fridge is not level, the door and magnetic seal alignment will be affected and may cause your Fridge to work incorrectly. Once the fridge is placed in its final location, adjust the leveling feet at the front by turning them.

Cleaning before use

Wipe the inside of the fridge with a weak solution of bicarbonate of soda. Then rinse with warm water using a damp sponge or cloth. Wash the baskets and shelves in warm soapy water and dry them completely before replacing them in the fridge.

Before plugging in

Check that you have an outlet that is compatible with the plug provided with the refrigerator.

If this is not the case, see the section entitled ELECTRICAL INFORMATION.
DO NOT SWITCH ON UNTIL FOUR HOURS AFTER MOVING THE FRIDGE.
The coolant fluid needs time to settle. If the appliance is switched off at any time, wait 30 minutes before switching it back on to allow the coolant fluid to settle.

Before filling your fridge

Before storing food in your fridge, turn the fridge on and wait for 24 hours to make sure it is working properly and to allow the fridge to fail to the correct temperature.

OPERATING YOUR APPLIANCE

Temperature Control

Attention! This appliance has an infrared sensor. to avoid malfunction of the appliance, do not cover the infrared sensor or place the appliance under direct sunlight or in a bright environment.
A: Infrared sensor
B: Power switch button
C: Light mode selection button
D: Temperature display
E: Temperature adjust button: UP 1°C
F: Temperature adjust button: Down 1°C
Press the power switch button for 3 seconds to turn on or turn off the appliance.
Light mode selection: Press the light mode selection button for 3 seconds to select light mode. There are 2 light mode options.
1. Light mode 1: When the pictogram displays on the LCD screen, the light will be automatically on or off by the door opening and closing.
2. Light mode 2: When the pictogram displays on the LCD screen, the light will always turn on.
Press the button to increase or decrease the temperature.
Important notice: after selecting the desired temperature, the display will continue to show the real temperature inside the appliance, which will vary gradually until it reaches the selected temperature.
Press the temperature adjust buttons together for 3 seconds to change the temperature display from Celsius to Fahrenheit.

Alarm system:

Door open alarm:
- If the door is left open for over 5 minutes, the door open alarm will activate. The alarm pictogram flashes and displays on the LCD screen with a beeping warning sound. Press any key to stop the beeping warning sound.
- The warning will automatically stop if the door is properly closed.
High temperature alarm:
- If the inside temperature is over 25°C for over 6 hours, a high-temperature alarm will activate, and the pictogram will flash on the screen with a beeping warning sound. Press any key to stop the beeping warning sound.
- This alarm will stop if the temperature returns to normal. In case the warning continues, contact your after-sales service.
Low temperature alarm:
- If the inside temperature is below -2°C for over 3 hours, the low-temperature alarm will activate, the pictogram will flash on the screen with a beeping warning sound, and press any key to stop the beeping warning sound.
- This alarm will stop if the temperature returns to normal. In case the warning continues, contact your after-sales service.
- NOTE: If the unit is unplugged, lost power, or turned off; you must wait 3 to 5 minutes before restarting the unit. If you attempt to restart before this time delay, the refrigerator will not start.
- If you choose to change the thermostat setting, adjust the thermostat control by one numerical increment at a time. Allow several hours for the temperature to stabilize between adjustments.
- Do not leave the door open for too long so that the indoor temperature does not rise too much.

Drawer Divider Installation for model RE2T136A:

In order to make better use of the drawer to store different drinks or fruits, RE2T136A model is equipped with 2 sets of drawer dividers.

Please find the divider accessories in the accessory plastic bag.
- The details of the accessories are as follows:
  
  Divider permanent seat (Left) 2pcs
  
  Divider permanent seat (Right) 2pcs
  
  Movable divider (2 rotators, 2 U-shaped tubes) 2sets
  
  Upper drawer S.S. pipe 2pcs
  
  Lower drawer S.S. pipe 2pcs
Please follow the steps in the figure to install:
1. Étape 1: To install 1pc right and 1pc left divider permanent seat on the two sides on the upper drawer (figure 1) and lower drawer (figure 2)
2. Étape 2: To assemble the movable divider, the parts that need to be prepared are 2 pcs of upper drawer pipe, 2 U-shaped tubes and 2 rotators, as shown in figure 3.
3. Étape 3: Complete assembly (Upper drawer)
4. Étape 4: To assemble the divider on the lower drawer, please see Figure 4.
5. Étape 5: Install the S.S. tube to prevent bottles placed in the lower drawer from falling when opening and closing the door.

Handle installation (depends on the model):

There is a handle in the accessory bag, Please follow the below instructions to install the handle.

Remove the door gasket.
Install the handle with the screws provided. DO NOT over-tighten as this will cause damage to the stainless-steel door surface.
Replace the door gasket.

Charcoal filter (depends on the model):

This appliance is equipped with a charcoal filter to fresh the air inside, it is a black washer in the top left at the back of appliance, it should be replaced annually and can be bought from the manufacturer.
To remove it, turn the charcoal filter to set free pins and pull it directly from the inside of the appliance towards you.

For RE2T136A:

Open the upper drawer
Grab the sides of the drawer and lift the drawer at 45 degrees, and then remove the drawer
To remove it, turn the charcoal filter to set free pins and pull it directly from the inside of the cellar towards you
To access the nameplate (rating label), follow the same steps to remove the bottom drawer.

FOOD CONSERVATION

PREPARING FOOD FOR THE REFRIGERATOR

Carefully wrap fresh foods: they will then keep their flavor, color, humidity content and freshness. You also avoid the taste of some foods contaminating the taste of others. Only vegetables, fruit and salad vegetables can be stored in the vegetable compartment without being packed. Let hot dishes and drinks cool down outside the appliance. Remove the cardboard packing from around the yoghurt pots. Check the consume-by dates on the products you have bought. You should not exceed these.

ARRANGING FOOD IN YOUR REFRIGERATOR

The temperature inside your refrigerator is not uniform. Some areas are colder than others, and you must store your food in the appropriate areas according to their type to ensure that it can be kept safely.
Leave a space between the food items to allow the air to circulate freely and avoid different products contaminating each other.
Do not put packages and food in contact with the wall at the back of the appliance; this is a particularly cold and damp area of the appliance, and water droplets and frost condense there as part of your refrigerator’s normal operation.
The coldest area, indicated by the logo, is designed for delicate, sensitive and highly perishable food: meat, poultry, fish, cooked meats, prepared dishes, ready-made salads, egg or cream-based dishes and pastries, fresh pasta, pastry, pizza/quiches, fresh produce and raw milk cheese, ready- to-use vegetables sold in plastic bags and, more generally, any fresh product whose consume-by date is linked to its storage at a temperature of +4°C or below.

Food preservation and storage

The storage of foodstuffs must comply with the regulatory conservation temperatures established by the National Agency for Food, Environmental and Occupational Health Safety (ANSES).
Failure to comply with these storage temperatures involves risks of poisoning and food waste.
Under the recommended setting, the best shelf life is no more than 3 days in the refrigerator and 3 months in the freezer (4 stars); better storage time may reduce other parameters.
Failure to comply with these storage temperatures involves risks of poisoning and food waste.
For optimal conservation of foodstuffs, it is recommended to adjust the temperatures of the compartments as below.

CARE AND MAINTENANCE

Defrosting

The defrost of the fridge part is automatic.
When the refrigerator is in operation, beads of condensation or frost will form on the back wall. This phenomenon is normal. It is not necessary to wipe off any condensation or frost.
The back wall automatically defrosts. The condensed water flows into the condensate channel and is brought to the defrost pan located above the compressor, where it evaporates.
Note: Keep the condensate channel and the drain hole clean so that the condensed water can drain out.

Cleaning inside the fridge

After defrosting you should clean the fridge internally with a weak solution of bicarbonate of soda. Then rinse with warm water using a damp sponge or cloth and wipe dry.
Wash the baskets in warm soapy water and ensure they are completely dry before replacing in the Fridge.
Condensation will form on the back wall of the Fridge; however, it will normally run down the back wall and into the drain hole behind the salad bin.

Cleaning outside the fridge

Use standard non-abrasive detergent diluted in warm water to clean the fridge exterior.
The grille of the condenser at the back of the Fridge and the adjacent components can be cleaned by using a soft brush.
Do not use harsh cleaners, scouring pads or solvents to clean any part of the fridge

If you’re going on vacation

If your appliance is not to be used for several months, remove all food, turn off and unplug the appliance from the outlet.
Clean and dry the inside and outside of the appliance thoroughly. Also leave the door open, block it if necessary, to prevent condensation, odors, mold.
When the appliance is switched on for the first time, there may be a residual odor. In that case, run the appliance empty for a few hours at the coldest possible temperature.
The cold will kill any odors.

Moving the unit

Moving the appliance

First, disconnect your appliance.
Remove all bottles and secure any loose parts.
To avoid damaging the levelling screws on the feet, screw them tightly into the base.
Move the appliance into an upright position (preferably) or note the direction in which the appliance may be laid down by looking at its packaging.

Location

Do not place your refrigerator near a heat source, for example. Stove, boiler or radiator. Also, avoid direct sunlight.

Refrigerator upgrade

Make sure the refrigerator is level. Use the rotatable adjustable feet at the front. If the refrigerator is not level, the doors and magnetic sealing alignments will be affected and may cause malfunctions.

Do not turn on the refrigerator for 4 hours

After any movement, it must not be connected for 4 hours. This delay allows the coolant to be adjusted.

Installation

Let your device breathe. Heat is released from the walls, so it is important to leave a circulation of air around your device.

Energy saving tips

The refrigerator should be located in the coolest area of the room, away from heat-producing appliances or heating ducts, and out of direct sunlight.
Let hot foods cool to room temperature before placing them in the refrigerator. Overloading the refrigerator forces the compressor to run longer. Foods that freeze too slowly may lose quality or spoil.
Be sure to wrap food properly and wipe containers dry before placing them in the refrigerator. This cuts down on frost build-up inside the refrigerator.
Refrigerator storage bins should not be lined with aluminum foil, wax paper, or paper toweling. Liners interfere with cold air circulation, making the refrigerator less efficient.
Organize and label food to reduce door openings and extended searches. Remove as many items as needed at one time and close the door as soon as possible.

Turn off your appliance

If the unit is not likely to operate for a long period.
Remove all food from your appliance from the refrigerator.
Switch off the appliance by setting the thermostat to position 0.
Unplug the appliance.
Clean it thoroughly.
Keep the door open to prevent odors from rising.

Changing the light bulb

This appliance consists of light-emitting diodes (LEDs). This type of diode cannot be changed by the consumer. The lifetime of these LEDs is normally sufficient for no change to be made.
If, however, and despite all the care taken during the manufacture of your appliance, the LEDs were defective, please contact your after-sales service for any intervention.

TROUBLESHOOTING GUIDE

You can solve many common refrigerator problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling for service.

Problèmes	Solutions
The appliance is not running	ü The appliance is not plugged in ü The appliance is not turned on ü Check if voltage of the installation ü Check the circuit breaker or if the fuse has blown
The appliance is not cold enough	ü Check the temperature control setting ü Check if ambient temperature is beyond appliance operating temperature ü The door is opened too frequently ü The door is not closed properly ü The door is not sealing properly ü Insufficient free space around the appliance
The compressor starts and stops frequently	ü The external temperature is high. ü A large quantity of bottles has been put into the cellar. ü The appliance is opened frequently. ü The door is not properly closed. ü The cellar has not been correctly set.
LED lights do not operate	ü The appliance is not plugged in ü The fuse has blown ü LED lights are not broken ü The light switch is off
Vibration	ü Check and ensure that the appliance is level.
The appliance makes a lot of noise	ü A noise resembling circulating water is produced by the coolant gas, and this is normal. ü At the end of a cooling cycle, you can hear the noise of water circulating.

ü Expansion and contraction of the internal walls may cause a cracking sound.

ü The appliance is not level

ü Check if fan is in good condition

The door does not close properly

ü The appliance is not level.

ü The door seal is dirty or damaged.

ü The shelves are not positioned correctly.

ü A part of the contents is preventing the door from closing.

LED display is not working properly

ü Control panel failed

ü The power PCB has broken

ü The appliance is not plugged in

ü The probe is not working.

ENVIRONMENT

This appliance is marked according to the European directive 2019/290/CE on Waste Electrical and Electronic Equipment (WEEE).
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
The symbol on the product, or on the documents accompanying the product, the Crossed-Out Wheelie Bin, indicates that this appliance may not be treated as household waste.
Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment or, if you are buying an equivalent product, to the retailer of the new product.
The user is responsible for taking the appliance to the appropriate collection center at the end of its useful life. Selective and appropriate collection for the recycling of no longer used appliances and their disposal and destruction in an environmentally friendly manner helps to prevent potential negative effects on the environment and health and encourages the recycling of materials used to make the product.
For more detailed information about treatment, recovery and recycling of this product, please contact your local authority, your household waste disposal service or the retailer where you purchased the product.

WARNING

As we continuously improve our products for the benefit of our customers, we reserve the right to modify technical characteristics without notice.
Warranties for FRIGELUX brand products are offered exclusively by selected retailers. No part of these instructions may be considered a supplementary guarantee.
FRIO ENTREPRISE cannot be held liable for errors or technical or editorial omissions in this document.
Non-binding document.
Your Economic Operator Contact is:
FRIO ENTREPRISE
143 Boulevard Pierre Lefaucheux
72230 ARNAGE
Tel : 0243216980
Email : Operateur@groupefrio.com

Frequently Asked Questions

Q: Can I store flammable items in the appliance?
- A: No, it is not safe to store flammable substances in the appliance to prevent the risk of explosion.
Q: What should I do if the power cord is damaged?
- A: If the power cord is damaged, do not attempt to replace it yourself. Contact your after-sales service for assistance.
Q: Can I extend the power cord of the appliance?
- A: No, it is not recommended to lengthen the power cord as it may lead to overheating and fire hazards.

Documents / Resources

FrigeluX RETT136A Built In Refrigerator [pdf] User Manual
RETT136A, RE2T136A, RETT136A Built In Refrigerator, RETT136A, Built In Refrigerator, Refrigerator

References

User Manual

FrigeluX RETT136A Built-In Refrigerator

Product Usage Instructions

INTRODUCTION