FRAME Communications GET-100 Gigabit Ethernet Tester Instruction Manual
Product Overview
The GET-IOO is a handheld IOM/IOOM/IOOOM Gigabit Ethernet tester, used for Ethernet installation, operation and maintenance services.
It is a small and portable device which performs packet capture, network monitoring, network performance testing, data generation, test leads and error test functions in an organic whole unit. It is widely used in network layer 1/2/3 BER test and RFC -2544 test. CET-IOO enables maintenance staff to quickly locate faults and analyse the networ
Features
- Electrical port and optical ports with rate at 10/100/1000Mbps
- Smart and durable, field application ready
- 5-inch LCD colour touch screen, smart navigation menu
- Results can be shown graphically and numerically
- RFC2544 auto test, quickly finds the fault
- Full Y.1564 test
- LED indicator light, on-screen display and ICON
- Large capacity memory to save settings and test results
- Embedded software to easy upgrade
Functions
- L1/L2/L3 BER Test
- Integrated RFC2544 benchmark test: throughput, packet loss, latency, back-to-back Multi-stream traffic generation (10 traffic streams)
- Receiving end-flow filter analysis
- VLAN test
- Connectivity test: PING, TRACE ROUTE, IP scan
- Through, terminal mode test and frame length, frame type, and utilisation stat.
- Optical power test, optical module temperature, working current, voltage test
- Cable VCT: Identifying short circuit, open circuit, cable length fault location
- Service disruption time test
- Intelligent loopback test
- Jitter Test
- OAM and TCP testing
- USB data interface, driver-free
Specification
WWW.FRAME.CO.UK
SALES@FRAME.CO.UK
Read More About This Manual & Download PDF:
Documents / Resources
 |
FRAME Communications GET-100 Gigabit Ethernet Tester [pdf] Instruction Manual GET-100, GET-100 Gigabit Ethernet Tester, Gigabit Ethernet Tester, Ethernet Tester, Tester |
