Corsair M55 WIRELESS
WIRELESS GAMING MOUSE
M/N:RGP0168 (Mouse)
RGP0146 (Dongle)
GETTING TO KNOW YOUR MOUSE
The Corsair M55 Wireless mouse features the following components:
- A: LEFT MOUSE BUTTON
- B: MIDDLE CLICK/SCROLL WHEEL
- C: RIGHT MOUSE BUTTON
- D: BATTERY/WIRELESS/DPI STATUS LED INDICATOR & DPI BUTTON
- E: FORWARD BUTTON
- F: BACK BUTTON
- G: BATTERY COVER
- H: GAMING SENSOR
- I: USB WIRELESS RECEIVER STORAGE
- J: POWER / WIRELESS MODE BUTTON
- K: USB WIRELESS RECEIVER
SETTING UP 2.4GHz SLIPSTREAM WIRELESS
Experience hyper-fast, sub-1ms wireless connection for uncompromising gaming performance.
- Connect the USB WIRELESS RECEIVER (K) to an available USB 2.0 or 3.x port on your PC or a nearby USB port.
- Power on the mouse by holding the POWER / WIRELESS MODE BUTTON (J) for 5 seconds, or until the BATTERY/WIRELESS/DPI STATUS LED INDICATOR & DPI BUTTON (D) lights up.
- The BATTERY/WIRELESS/DPI STATUS LED INDICATOR & DPI BUTTON (D) will blink white and turn solid white when connected.
- If the indicator is blue, press the POWER / WIRELESS MODE BUTTON (J) once to swap to 2.4GHz mode.
- Download the iCUE software from www.corsair.com/downloads.
- Run the installer and follow the on-screen instructions.
If reconnection is needed, initiate USB receiver pairing via USB cable and reconnect in the iCUE software settings.
SETTING UP BLUETOOTH® WIRELESS
Bluetooth wireless is ideal for everyday computing, productivity, and office tasks.
- Initiate Bluetooth pairing on your Bluetooth 4.0 or higher enabled device.
- Power on the mouse by holding the POWER / WIRELESS MODE BUTTON (J) for 5 seconds, or until the BATTERY/WIRELESS/DPI STATUS LED INDICATOR & DPI BUTTON (D) lights up.
- The indicator will blink blue and turn solid blue when connected.
- If the indicator is white, press the POWER / WIRELESS MODE BUTTON (J) once to swap to Bluetooth mode.
- To re-pair, press and hold the MIDDLE CLICK / SCROLL WHEEL (B) and then press the POWER / WIRELESS MODE BUTTON (J) once to enter Bluetooth pairing mode.
Follow the on-screen instructions to connect your device.
ON-THE-FLY DPI TUNING
Adjust your mouse's onboard DPI setting in 50 DPI increments without software for immediate sensitivity adjustments.
| FUNCTION | SHORTCUT | MULTI-PURPOSE LED INDICATOR |
|---|---|---|
| Increase DPI by 50 | Hold DPI BUTTON (D) and press FORWARD BUTTON (E) | Blinks green |
| Decrease DPI by 50 | Hold DPI BUTTON (D) and press BACK BUTTON (F) | Blinks red |
| Reset DPI Stage | Hold DPI BUTTON (D) then both FORWARD BUTTON (E) and BACK BUTTON (F) for 2 seconds | Blinks yellow |
On-the-fly DPI changes are saved to onboard memory and can be further adjusted in 1 DPI steps in iCUE software. If iCUE is running, changes are saved directly to the software profile.
MOUSE STATUS, DPI SETTINGS AND INDICATIONS
Wireless connection and battery status are communicated through the BATTERY/WIRELESS/DPI STATUS LED INDICATOR & DPI BUTTON (D). The mouse comes preloaded with common competitive DPI settings that can be selected by pressing the DPI button.
BATTERY STATUS
| BATTERY STATUS | BATTERY/WIRELESS/DPI STATUS LED INDICATOR |
|---|---|
| Battery charging | Pulsing green |
| Battery critical, recharge required | Pulsing red |
| Battery low, recharge soon | Blinking red |
| Battery medium | Blinking amber |
| Battery high | Blinking green |
| Battery charged | Green |
WIRELESS STATUS
| WIRELESS STATUS | BATTERY/WIRELESS/DPI STATUS LED INDICATOR |
|---|---|
| 2.4GHz wireless mode - pairing | Blinking white |
| 2.4GHz wireless mode - paired | White |
| 2.4GHz wireless mode - pairing failed | Pulsing white |
| BT wireless mode - pairing | Blinking blue |
| BT wireless mode - paired | Blue |
| BT wireless mode - pairing failed | Pulsing blue |
DPI STAGE STATUS
| DPI STAGE STATUS | DPI STAGE LED INDICATOR |
|---|---|
| Stage #1 - 400 DPI | Solid Red |
| Stage #2 - 800 DPI | Solid Orange |
| Stage #3 - 1200 DPI | Solid Yellow |
| Stage #4 - 1600 DPI | Solid Green |
| Stage #5 - 3200 DPI | Solid Blue |
