Thank you for purchasing a Waykar dehumidifier. Waykar products and services aim to bring convenience to your work and life. It is highly recommended to keep this manual for future reference.
Please read this manual carefully to ensure proper use of the dehumidifier. Waykar dehumidifiers are widely used in family bedrooms, bathrooms, basements, offices, and storage rooms. They provide quick and efficient operation to reduce room humidity, contributing to a healthy and comfortable living environment.
If there is any problem with the product, please contact Waykar Customer Service at support@waykar.com with your Purchase Order ID for effective problem resolution.
To prevent internal damage, it is very important to keep the unit upright throughout its journey. Please leave the dehumidifier standing upright, outside its box, for 24 hours before plugging it in. This allows the internal components, especially the refrigerant, to settle properly.
To prevent injury to the user or other people and property damage, the following instructions must be followed when using the Dehumidifier. Incorrect operation due to ignoring instructions may cause harm or damage. These instructions are for household use only.
The front of the Waykar PD160B dehumidifier features:
The rear of the Waykar PD160B dehumidifier features:
This unit may have been tilted or placed upside down during shipping. To ensure proper operation, ensure the unit is upright for at least 24 hours before initial use.
This dehumidifier is designed to operate in environments between 41°F (5°C) and 95°F (35°C).
When using the dehumidifier, other objects surrounding the machine should be kept at a distance of at least 7.9 inches (20cm) to ensure proper airflow and efficiency.
The control panel includes the following buttons and indicators:
Press to turn the dehumidifier on and off.
The humidity level can be set within a range of 30%RH to 80%RH in 5% increments.
The TIMER function enables you to either Delay Start or Delay Stop the unit for 1 to 24 hours. When the unit is running, selecting TIMER will turn the unit off after the set hours (Delay Stop). When the unit is off, TIMER will turn the unit on after the hours you selected (Delay Start).
To set the TIMER: Press or hold the Timer Button to change the delay timer in 1-hour increments, up to 24 hours. After setting, the control panel will display the remaining time until the unit starts or stops.
If the TIMER button is pressed again, the control panel will display the room temperature and humidity value as before. Adjusting the TIMER setting to 00 will cancel the Auto Start/Stop function.
For Delay Start, the fan speed and humidity maintained will be the same as the previous setting.
NOTE: Before entering TIMER setting, ensure power is supplied to the unit and that you have pressed the Setting Button to set a desired room humidity first.
Control the fan speed. Press to select either High or Normal fan speed. A higher fan speed results in quicker moisture removal.
Set the speed to high for maximum removal initially. Once humidity is reduced and quiet operation is preferred, you can return the speed to Normal.
When the tank is full, the indicator light will flash, and the machine will automatically shut off. After the water in the tank is emptied and the tank is returned to its proper place, the indicator will go out, and the machine will restart.
Power on: The compressor starts a few seconds after the fan begins to work.
Power off: The compressor shuts down immediately, and the fan will stop after a few seconds. (If other malfunctions occur, or the humidity reaches the desired level, the fan will stop after tens of seconds).
The compressor features a "3 minutes delay protection" function. While the dehumidifier is powered, the compressor can only start again three minutes after its last shutdown.
Fault Phenomenon | Analysis of Causes | Processing Method |
---|---|---|
Humidity always shows "25% RH" but there is a big difference from the actual humidity. | Humidity sensor failure? | Set the humidity to 30%RH; the dehumidifier can still continue to work and be used normally. Repair and replace the humidity sensor. |
Humidity always shows "99% RH" but there is a big difference from the actual humidity. | Water on the surface of humidity sensor? | The dehumidifier is not affected and can continue to work and be used normally. Please let the dehumidifier keep working for a period of time. After the water on the surface of the humidity sensor is removed, it will return to normal. Repair and replace the humidity sensor. |
There are two ways to remove the collected water:
When the water tank is full, remove the tank and empty it.
NOTE: Replace the empty tank back into the unit, and once seated correctly, the unit will start up again. You should hear a click when the tank is in the correct position. Do not remove the float in the tank, otherwise the sensor will not be able to sense the water level properly, which could lead to water overflow when the tank is full.
Water can be automatically emptied into a floor drain by attaching a draining hose to the dehumidifier. (It may be helpful to remove the water tank first to better see the connection.) The inner diameter of the draining outlet is 0.39 inches.
When using manual drainage, insert the "rubber plug" into the continuous draining outlet to prevent water leakage. When using the drainage hose for continuous drainage, insert the "rubber plug" into the water tank draining outlet to prevent water leakage.
NOTE: Make sure the connection is tight and there is no leaking. Lead the water hose to the floor drain or a suitable drainage facility; the drainage facility should be lower than the draining outlet of the dehumidifier. Be sure to run the sloping water hose downward to let the water flow out smoothly. When the continuous drainage feature is not being used, remove the draining hose from the outlet.
WARNING: Turn the dehumidifier off and remove the plug from the wall outlet before cleaning.
Wipe down the water tank every 2 weeks.
Pull up to remove the air filter. Clean the filter with water and a soft cloth at least once every 30 days. After cleaning, ensure the filter is dry before reinserting.
When not using the dehumidifier for a long time:
WARNING: Do not operate the dehumidifier without a filter. Dirt and lint will clog it and reduce its performance.
Check the information below for troubleshooting steps to resolve common issues. This list includes most common cases but not issues due to defective units, crafts, or materials. If all troubleshooting steps are exhausted and the issue persists, please contact Waykar Customer Service for further assistance.
Problem | Reason | Method |
---|---|---|
Dehumidifier does not work | The power cord is unplugged. | Make sure that the unit's plug is inserted properly into the power outlet. |
Is the FULL TANK indicator blinking? (The tank is full or in a wrong position?) | Empty the water in the water tank and then reposition the tank. | |
Is the room temperature above 95°F (35°C) or below 41°F (5°C)? | This product does not apply to overly hot or cold environments; the machine will automatically enter protection mode. This is a normal phenomenon. | |
Is the room temperature between 41°F (5°C) and 68°F (20°C)? | When running under lower ambient temperatures, the machine will automatically defrost, which is a normal phenomenon. It will restart dehumidification again until the defrosting process is finished. | |
The dehumidifier is in the defrosting process. | It is normal for the compressor to cease during defrosting. Wait until the process is finished; it will restart dehumidification again. | |
Is the room humidity lower or reaching the preset humidity level? (When the room humidity has reached the preset level, the dehumidifier will enter Standby Mode and the indicator on LCD will flash.) | Please set the humidity 5%RH lower than the room humidity or set the humidity to 30%RH. | |
This is to prevent the frequent start of the machine. Does the machine stop working just now? | Please wait for more than 3 minutes. | |
Room humidity is low. | The dehumidifier is designed to work in the humidity range of 30%-80%. Above or below this range, it will not work. | |
Dehumidifier does not dry the air as it should | The air filter is dirty. | Clean the air filter. |
Is the air inlet or air outlet obstructed? | Remove the obstruction from the air inlet or outlet. | |
The dehumidifier size is too small for application. | Increase the quantity of dehumidifiers, or change to a higher capacity dehumidifier. | |
Poor air circulation. | Please leave about 20cm (7.9 inches) around the product. | |
Do not allow enough time to remove the moisture. | Allow enough time to remove the moisture. When first installed, allow at least 3-4 days to maintain the desired RH. | |
The dehumidifier makes loud noise when operating | The room has not been sealed properly. | Check that all doors, windows, and other openings are securely closed. |
Room temperature is too low, or below 41°F (5°C): The machine will not work or undergo poor dehumidifying efficiency in low temperature. | Please wait until the temperature rises to above 41°F (5°C) or higher. | |
The dehumidifier is not positioned levelly. | Move the machine to a horizontal position. | |
Is there blocking around the air inlet? The air filter is clogged. | Clean up the dirt or lint on the air outlet and intake. | |
Dehumidifier operates continuously | Is the filter installed correctly? | Please check whether the packing bag of the filter had been removed and the filter has been installed correctly. |
Check if the dehumidifier is in Continuous Mode | Do Not set the humidity too low. Typically, 40-50% are good for use. | |
Overflow of water on floor | Room humidity is too high. | Change humidity settings. Or change to a higher capacity dehumidifier. |
Doors and windows are open. | Ensure that all doors, windows, and other openings are closed. | |
Hose to connector or hose connection may be loose. | Connect the hose with the draining outlet tightly. | |
Overflow of water on floor | The water tank has not been installed properly. | Re-install the water tank properly. |
The float of water tank has been stuck. | Move the float and let it swing freely. | |
The magnet on the float has come off. | Put the magnet in the right position. |
Please contact Waykar Customer Service at support@waykar.com if the dehumidifier operates abnormally or does not operate, and the above solutions are not useful.
MODEL | PD160B |
---|---|
POWER SOURCE | 120V ~ 60Hz |
RATED POWER (95°F, 90%RH) | 230W |
RATED CURRENT (95°F, 90%RH) | 2.0A |
MOISTURE REMOVAL (65°F, 60%RH) | 9.0 Pints/Day (4.25L/Day) |
MOISTURE REMOVAL (80 °F, 60%RH) | 14 Pints/Day (6.6L/Day) |
MOISTURE REMOVAL (86 °F, 80%RH) | 25 Pints/Day (12L/Day) |
MOISTURE REMOVAL (95 °F, 90%RH) | 34 Pints/Day (16L/Day) |
INPUT POWER (65°F, 60%RH) | 128W |
INPUT CURRENT (65°F, 60%RH) | 1.2A |
IEF (65°F, 60%RH) | 1.30 liters/kWh |
MOTOR FLA | 0.19A |
MOTOR COMPRESSOR | RLA: 2.5A LRA: 10.0A |
REFRIGERANT | R134a/5.11ozs (145g) |
MAXIMUM ALLOWABLE PRESSURE | 363PSIG (2.5MPa) |
HIGH PRESSURE | 232PSIG (1.6MPa) |
LOW PRESSURE | 90PSIG (0.62MPa) |
WARNING: This product can expose you to chemicals including Styrene and its compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit: www.P65Warning.ca.gov.
Waykar offers a 12-month warranty on all products with original proof of purchase, covering defects from manufacturing parts or workmanship during the Warranty Period. The warranty does not apply if damage is caused by other factors, including but not limited to:
These are general terms for warranty service. Waykar encourages customers to reach out if any issues arise, regardless of warranty terms. For issues with a Waykar product, contact support@waykar.com for assistance.
Register your product at www.waykar.com to extend your 1-year warranty by an additional year. Please fill out all required fields and include your Order ID and Date of Purchase if applicable.
For questions or concerns about your product, contact Waykar's expert support team. Waykar customer service is available to help.
13211, Spring Street Baldwin Park, CA, US
Email: support@waykar.com
Live Chat: www.waykar.com
24 Hours available
*Please have your Order Number ready before contacting customer support.
File Info : application/pdf, 20 Pages, 2.63MB
DocumentDocument![]() |
Waykar Home Dehumidifier PD160B User Manual Comprehensive user manual for the Waykar PD160B Home Dehumidifier, covering safety instructions, operation, maintenance, troubleshooting, and technical specifications. Learn how to effectively reduce room humidity for a healthier, more comfortable living environment. |
![]() |
Waykar PD160B Home Dehumidifier User Manual The Waykar PD160B Home Dehumidifier User Manual provides comprehensive instructions for safe operation, maintenance, and troubleshooting of the PD160B dehumidifier. Learn how to effectively reduce humidity in bedrooms, bathrooms, basements, offices, and storage rooms for a healthier, more comfortable environment. |
![]() |
Waykar PD160B Home Dehumidifier User Manual and Troubleshooting Guide Comprehensive user manual for the Waykar PD160B Home Dehumidifier, covering safety instructions, operation, parts description, water removal, cleaning, maintenance, troubleshooting, and technical specifications. Learn how to effectively control humidity and maintain your dehumidifier. |
![]() |
Waykar PD160B-PRO Home Dehumidifier User Manual Comprehensive user manual for the Waykar PD160B-PRO Home Dehumidifier, covering safety precautions, operation instructions, maintenance, troubleshooting, and specifications for optimal indoor air quality. |
![]() |
Waykar PD160B Home Dehumidifier User Manual & Safety Guide Comprehensive user manual for the Waykar PD160B Home Dehumidifier, covering operation instructions, safety precautions, maintenance, troubleshooting, and warranty information. Learn how to effectively use and care for your Waykar dehumidifier for optimal indoor climate control. |
![]() |
Waykar PD1201B Home Dehumidifier User Manual Comprehensive user manual for the Waykar PD1201B Home Dehumidifier, covering safety instructions, operation, maintenance, troubleshooting, and product specifications to ensure efficient humidity control and a comfortable living environment. |
![]() |
Waykar PD253B Home Dehumidifier User Manual Comprehensive user manual for the Waykar PD253B Home Dehumidifier, covering setup, operation, maintenance, troubleshooting, and technical specifications. |
![]() |
Waykar Home Dehumidifier User Manual PD160B-PRO Comprehensive user manual for the Waykar Home Dehumidifier, models PD160B-PRO and PD160B-PRO-B. Includes safety precautions, parts identification, operation instructions, maintenance, troubleshooting, specifications, and warranty information. |