1. Introduction
Thank you for choosing the AIPER Scuba X1 Pro Cordless Pool Robot. This advanced robotic cleaner is designed to provide efficient and intelligent cleaning for inground pools up to 2,150 sq.ft. Featuring intelligent suction adjustment, smart path planning, and multi-layer filtration, the Scuba X1 Pro ensures a spotless pool with minimal effort. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your device.
Image: The AIPER Scuba X1 Pro, a premium adaptive pool cleaning robot, shown with its charging dock.
2. Produit terminéview
Caractéristiques principales
- Intelligent Suction Adjustment: Turbidity sensor detects dirt in real-time, automatically adjusting between Eco and Max modes for optimized cleaning. Manual mode selection is also available via onboard controls or the Aiper App.
- Smart Path Planning (FlexiPath Technology): Intelligently maps your pool, ensuring full coverage with precise grid and Cross-Pattern paths for floors, Y-shaped wall cleaning, and a high-platform mode for elevated areas.
- Upgraded Battery Life: Enhanced battery system provides up to 25% longer cleaning time, covering up to 70,000 gallons and filtering the entire pool up to 10 times per charge.
- Station de chargement sans fil : Eliminates manual plug-ins; simply place the cleaner on the dock for seamless recharging and storage.
- Unmatched Suction Power: Dual 6600 GPH motors deliver powerful suction, removing fine sand and pebbles. Paired with high-performance brushes for effective scrubbing.
- Waterline Cleaning (WaveLine 2.0 Technology): Maintains a steady 5cm reach above the waterline, tackling stubborn algae and grease with dual rear jets for stability.
- Filtration multicouche : Dual-layer filtration captures debris down to 3µm, with a 180µm pre-filter for larger particles and a Replaceable MicroMesh filter for microscopic contaminants.
- Advanced Obstacle Avoidance (OmniSense+ Sensors): Easily spots and avoids obstacles in your pool, preventing collisions.
Image: The AIPER Scuba X1 Pro Cordless Pool Robot with its charging dock and a smartphone displaying the Aiper app interface.
Image: Illustration of the Scuba X1 Pro's auto-adaptive cleaning modes, showing how it adjusts power based on debris levels.
Image: Visual representation of the Scuba X1 Pro's dual-jet powerful suction, capable of removing fine sand, small pebbles, and algae.
3. Installation
Charge initiale
Before first use, ensure the Scuba X1 Pro is fully charged. Place the robot onto its charging dock. The dock is designed for seamless recharging and storage, eliminating the need for manual plug-ins. A full charge typically takes approximately 4 hours.
Image: The Scuba X1 Pro positioned on its wireless charging dock, ready for storage and recharging.
Placement dans la piscine
Once charged, carefully place the Scuba X1 Pro into your pool. Ensure it is fully submerged before initiating a cleaning cycle. The robot is designed for inground pools up to 2,150 sq.ft.
Connexion à l'application
The Scuba X1 Pro can be controlled via the Aiper App. Download the app from your device's app store and follow the on-screen instructions to pair your robot. Note that app control works only on land; underwater control requires the optional HydroComm Pure accessory.
Image: Information on optional accessories, specifically the HydroComm Pure, which enables underwater control and waterline retrieval.
4. Mode d'emploi
Démarrage d'un cycle de nettoyage
You can start a cleaning cycle using the onboard controls or through the Aiper App. The robot will automatically begin mapping and cleaning your pool using its FlexiPath technology.
Image: Diagram illustrating FlexiPath Smart Path Planning Technology, showing Cross-Pattern for floor cleaning and S-Pattern for missed areas.
Intelligent Suction Adjustment
The Scuba X1 Pro's turbidity sensor continuously monitors the water's cleanliness. It will automatically switch between Eco mode (for lighter debris) and Max mode (for heavier debris) to optimize cleaning efficiency and battery life. You can also manually select these modes via the Aiper App or the robot's controls.
Nettoyage de la conduite d'eau
The WaveLine 2.0 technology allows the robot to clean the waterline effectively. It maintains a steady 5cm reach above the waterline, scrubbing away algae and grease. Dual rear jets provide stability during this process.
Image: The Scuba X1 Pro performing efficient waterline scrubbing, demonstrating its ability to clean 2 inches of waterline coverage with 60 seconds of horizontal movement.
Évitement d'obstacles
Equipped with OmniSense+ sensors, the Scuba X1 Pro can detect and avoid obstacles in your pool, ensuring a smooth and uninterrupted cleaning path. It also features advanced depth and downward-facing sensors to prevent falls from elevated platforms.
Image: The Scuba X1 Pro demonstrating obstacle avoidance using OmniSense+ sensors, preventing falls from elevated platforms.
5. Entretien
Nettoyage du filtre
The Scuba X1 Pro features a multi-layer filtration system. Regularly clean the filter basket and, if applicable, replace the MicroMesh filter to maintain optimal cleaning performance. The 180µm pre-filter traps larger particles, while the MicroMesh filter removes microscopic contaminants down to 3µm.
- For heavy debris (leaves, mud, large particles), use the filter basket only.
- For crystal clear water (fine sand, dust, pollen), add the MicroMesh filter.
Image: Guide on smart filter selection, showing the use of the filter basket for heavy debris and the addition of a MicroMesh filter for fine particles.
Nettoyage général
After each use, rinse the robot with fresh water to remove any pool chemicals or debris. Inspect the brushes and tracks for any entangled hair or debris and clean as necessary.
6. Dépannage
If you encounter any issues with your AIPER Scuba X1 Pro, please refer to the following common troubleshooting steps:
- Robot not moving or cleaning: Assurez-vous que la batterie est complètement chargée. Vérifiez qu'aucun obstacle ne bloque les brosses ou les rails.
- Mauvaises performances de nettoyage : Clean the filter basket and MicroMesh filter. Ensure the pool water chemistry is balanced.
- Problèmes de connectivité de l'application : Ensure your smartphone's Bluetooth is enabled and the robot is within range. Restart both the app and the robot.
For more detailed troubleshooting or persistent issues, please contact AIPER customer support.
7. Spécifications
| Fonctionnalité | Spécification |
|---|---|
| Nom du modèle | Scuba X1 Pro |
| Numéro de modèle de l'article | PRT1P |
| Marque | AIPER |
| Source d'énergie | Alimenté par batterie |
| Dossier spécial | Sans fil, rechargeable |
| Méthode de contrôle | Application |
| Type de batterie | Lithium-Ion (1 inclus) |
| Contenu énergétique de la batterie | 224.64 Wattheures |
| Temps de charge | 4 heures |
| Dimensions du produit | 19 po L x 16 po l x 9 po H (48.26 x 40.64 x 22.86 cm) |
| Poids de l'article | 39 livres (17.69 kg) |
| Matériel | Plastique |
| Couleur | Gris foncé |
| Assemblage requis | Non |
8. Garantie et assistance
The AIPER Scuba X1 Pro comes with a manufacturer's warranty. AIPER offers an Extended One-Year Warranty and Complimentary Consumable Replacements as part of their Aiper Care program.
Image: Information highlighting the Scuba X1's industry-leading quality control, including high salt tolerance, chlorine resistance, and extensive component testing.
For warranty claims, technical support, or to purchase replacement parts and accessories, please visit the official AIPER webVous pouvez également consulter leur site web ou contacter leur service client. Vous trouverez plus d'informations et de ressources d'assistance sur le site web. AIPER Store on Amazon.
