1. Introduction
This manual provides essential instructions for the safe and effective use of your Fieety Ultra 8 Adapter. This adapter is designed as a replacement charger specifically for the Ultra 8 Vacuum Cleaner. Please read this manual thoroughly before use and retain it for future reference.
2. Consignes de sécurité
Pour garantir un fonctionnement sûr, suivez toujours ces précautions de sécurité de base :
- N'exposez pas l'adaptateur à l'eau ou à l'humidité.
- Do not use the adapter if it appears damaged.
- Assurez-vous que la prise de courant voltage correspond aux spécifications de l'adaptateur.
- Tenez l'adaptateur à l'écart des sources de chaleur et de la lumière directe du soleil.
- N'essayez pas de démonter ou de modifier l'adaptateur.
- Use only with compatible devices, specifically the Ultra 8 Vacuum Cleaner.
3. Contenu du colis
Vérifiez que votre colis contient l'élément suivant :
- 1 x Fieety Ultra 8 Adapter (Black)
Image 1: The Fieety Ultra 8 Adapter. This is the main component included in your package, designed to power and charge your Ultra 8 Vacuum Cleaner.
4. Configuration et connexion
Follow these steps to properly set up and connect your Fieety Ultra 8 Adapter:
- Inspectez l'adaptateur : Before connecting, visually inspect the adapter and its cable for any signs of damage. Do not use if damaged.
- Se connecter à l'aspirateur : Locate the charging port on your Ultra 8 Vacuum Cleaner. Insert the barrel connector of the adapter firmly into the charging port.
- Connectez-vous à une prise de courant : Plug the two-prong AC plug of the adapter into a standard wall power outlet. Ensure the outlet is easily accessible.
- Vérifiez la connexion : Once connected, the vacuum cleaner should indicate that it is receiving power or charging (e.g., a charging indicator light may illuminate).
5. Mode d'emploi
The Fieety Ultra 8 Adapter functions as a power supply and charger for your Ultra 8 Vacuum Cleaner. Its operation is straightforward:
- Once connected as described in Section 4, the adapter will supply power to the vacuum cleaner.
- If the vacuum cleaner's battery is depleted, the adapter will initiate the charging process. Refer to your Ultra 8 Vacuum Cleaner's manual for specific charging indicators and times.
- Disconnect the adapter from the power outlet and the vacuum cleaner when not in use or when the vacuum cleaner is fully charged, especially for extended periods.
6. Entretien
Proper care will extend the life of your adapter:
- Nettoyage: Débranchez l'adaptateur de toute source d'alimentation avant de le nettoyer. Essuyez la surface avec un chiffon doux et sec. N'utilisez pas de nettoyants liquides ni de produits abrasifs.
- Stockage: Store the adapter in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly winding the cable to prevent damage.
- Inspection: Periodically check the cable and connectors for any signs of wear, cuts, or bends. Replace the adapter if any damage is observed.
7. Dépannage
If you encounter issues with your Fieety Ultra 8 Adapter, try the following solutions:
| Problème | Cause possible | Solution |
|---|---|---|
| Adapter not providing power/charging. |
|
|
| L'adaptateur est anormalement chaud. |
|
|
If the problem persists after trying these solutions, contact customer support for further assistance.
8. Spécifications
| Numéro de modèle | Ultra 8 1943 |
| Fabricant | Fiabilité |
| Numéro de pièce | Ultra 8 1943 |
| Appareils compatibles | Ultra 8 Vacuum Cleaner |
| Type de connecteur | Adapter (Barrel Connector) |
| Source d'énergie | AC |
| Gamme de fréquences | 60 Hz |
| Couleur | Noir |
| Poids de l'article | 2.4 onces (0.07 kg) |
| Dimensions du produit | 6 x 4.99 x 1.9 pouces (15.24 x 12.67 x 4.83 cm) |
| Piles requises | Non |
| Portable | Non |





