Ruban adhésif DT50

Manuel d'utilisation du télémètre laser DTAPE

Model: DT50 GEN2

Marque : DTAPE

Introduction

This manual provides detailed instructions for the safe and efficient operation of your DTAPE Laser Measure. This device is designed for precise distance measurements, offering multiple modes for various applications.

Ce qui est inclus

Installation

Installation de la batterie

The DTAPE Laser Measure requires 1.5V AAA batteries. Locate the battery compartment on the back of the device, open it, and insert the batteries according to the polarity indicators. Close the compartment securely.

DTAPE Laser Measure with batteries, portable bag, and hand strap

Figure 1: DTAPE Laser Measure and included accessories.

Marche/Arrêt

Press and hold the power button (usually marked with a power symbol) to turn the device on or off. The backlit LCD display will illuminate upon activation.

Mode d'emploi

Mesure de distance de base

1. Point the laser aperture towards the target surface.
2. Press the measurement button (often the main central button) once to activate the laser.
3. Press the measurement button again to take a reading. The distance will be displayed on the screen.

DTAPE Laser Measure displaying distance measurement

Figure 2: The ultra-HD LCD display showing measurement results.

Conversion d'unités

To switch between measurement units (m/in/ft/ft+in), long-press the "Unit" button. The current unit will be indicated on the display.

DTAPE Laser Measure showing unit conversion options

Figure 3: Instant unit conversion between meters, feet, inches, and feet+inches.

Point de référence de mesure

The device allows you to set the measurement reference point from either the front or the back of the device. Press the reference point button (often indicated by an icon showing the device's base) to toggle between these options.

DTAPE Laser Measure showing front and back reference points

Figure 4: Switching between front and back measurement reference points.

Plusieurs modes de mesure

The DTAPE Laser Measure offers 7 measurement modes. Press the mode button (often indicated by a grid or multiple squares icon) to cycle through the available functions:

DTAPE Laser Measure showing various measurement modes

Figure 5: Visual representation of various measurement modes including distance, area, volume, and Pythagorean.

Official Product Video: DT50 Laser Distance Meter

Video 1: An official product video demonstrating the features and usage of the DT50 Laser Distance Meter, including various measurement modes and applications.

Entretien

The DTAPE Laser Measure is designed with an IP54 rating, providing protection against dust and splashing water.

Dépannage

If you encounter issues with your DTAPE Laser Measure, consider the following:

For persistent issues, refer to the detailed user manual included in the package or contact customer support.

Caractéristiques

FonctionnalitéDétail
MarqueBande dessinée
ModèleDT50 GEN2
Précision±1/16 pouce
Plage de mesure165 pieds
Vitesse de réponse0.4 secondes
Afficher2" Ultra-HD LCD
Indice de protection IPIP54 (Résistant à l'eau et à la poussière)
Source d'énergie1.5V AAA Batteries
MatérielAcrylonitrile butadiène styrène
Poids de l'article7 onces

Garantie et assistance

Your DTAPE Laser Measure comes with a 24-Month Warranty, ensuring peace of mind regarding product quality and performance.

For technical support, warranty claims, or any inquiries, please contact ACPOTEL customer service. Refer to the contact information provided in your product packaging or on the official ACPOTEL website.