KICKASS 12V 22A 9-Stage Automatic Smart ACDC Battery Charger

1. Introduction

Thank you for choosing the KICKASS 12V 22A 9-Stage Automatic Smart ACDC Battery Charger. This advanced charger is designed to keep your vehicle's battery healthy, charged, and ready for use. It automatically detects damaged batteries, intuitively repairs them, and actively provides long-term battery maintenance, ensuring peak performance for years.

This charger is compatible with a wide range of battery chemistries, including Lithium (LiFePO4), AGM, GEL, Sealed Lead Acid, and Flooded Lead Acid batteries. It is ideal for charging various battery types such as starter, deep-cycle, marine, and powersports batteries.

Ce qui est inclus

Figure 1 : Composants inclus. The image displays the KICKASS 22A Smart Charger along with its accessories: a 110V plug, an Anderson connector, alligator clamps, and a hook for hanging the unit. The charger features an LCD screen for readouts.

Votre colis doit contenir les éléments suivants :

• KICKASS 12V 22A Smart Charger Unit
• Cordon d'alimentation 110 V CA
• Anderson Connector Cable
• Anderson to Alligator Clip Adapter Cable
• Manuel de l'utilisateur (ce document)

2. Consignes de sécurité

Always read and understand all safety warnings and instructions before using the battery charger. Improper use can result in serious injury or property damage.

Précautions générales de sécurité

• Utilisez le chargeur dans un endroit bien aéré.
• N'exposez pas le chargeur à la pluie ou à des conditions humides.
• Tenir hors de portée des enfants.
• Débranchez le chargeur de la prise secteur avant de connecter ou de déconnecter la batterie.
• Ne chargez pas les batteries gelées.

Fonctions de protection

The KICKASS charger is built with comprehensive protection features to safeguard both the charger and your battery:

• Protection contre l'inversion de polarité : The charger will not activate if the battery terminals are connected incorrectly. An error will be indicated on the display.
• Protection contre les courts-circuits : Prévient les dommages en cas de court-circuit.
• Protection contre la surchauffe: The charger will reduce output or shut down if it detects overheating.
• Protection contre les surintensités: Protège contre les surintensités.
• Mémoire de chargement : The charger retains the last selected charging mode, simplifying repeated use.

3. Installation

Connexion du chargeur

The charger offers flexible connection options:

• Anderson Connectors: Connect the charger directly to a charge input Anderson connection on your battery box or system.
• Pinces crocodiles : Use the included Anderson to alligator clip attachment to connect directly to your battery terminals. Ensure correct polarity (red to positive, black to negative).

Figure 2: Charger with Cables. This image shows the KICKASS 22A Smart Charger unit along with its power cord, Anderson connector, and alligator clip adapter, illustrating the various connection methods available.

Options de montage

The charger is designed for convenient installation:

• Points de fixation multiples : Four convenient mounting points allow for easier and simpler installation to your caravan, camper, or canopy’s 12V power setup.
• Montage par crochet : Includes a hook mounting option if you wish to hang the charger from a wall or ceiling.

4. Modes de fonctionnement

The KICKASS 22A Smart Charger features a sophisticated 9-stage charging process and various modes to optimize battery health and charging efficiency. The easy-to-read LCD display indicates battery voltage level, charge mode, and any fault codes.

Figure 3: Charger in Operation. The image shows the KICKASS 22A Smart Charger connected to a battery, with its LCD screen displaying a voltage of 13.3V, indicating active charging or monitoring.

9-Stage Processus de charge

Ce multi-stage process ensures optimal charging and extends battery life:

1. Désulfatation : Recovers sulfated batteries.
2. Démarrage en douceur: Gently introduces current to deeply discharged batteries.
3. Frais de gros : Charge la batterie à environ 80 % de sa capacité à courant maximal.
4. Absorption: Charge la batterie à 100 % à une vitesse décroissanteasincourant g.
5. Analyse: Tests the battery's ability to hold a charge.
6. Révision: Restores deeply discharged or neglected batteries.
7. Charge flottante: Maintient la batterie à 100% de charge.
8. Maintenance du pouls : Applies pulses to keep the battery optimized during long-term storage.
9. Attendre: The charger enters a low-power state when charging is complete.

Specific Charging Modes

With the touch of a button, you can change your device’s charging modes:

• AGM Recondition Mode: Designed to bring old AGM batteries back to life, especially if they have been unused for a long period or have gone through a deep discharge.
• Lithium (7A) & Standard (7A) Trickle/Slow Charge Battery Modes: Ideal for charging smaller capacity lithium and standard batteries. Recommended for Gel, SLA, FLA batteries between 10-50AH and Lithium Batteries between 15-120AH (related to battery's BMS setting).
• Lithium Activation Mode: If your Lithium battery drops below its safety voltage parameters, toggle this mode. The charger will trickle charge the battery until it reaches the cut-in voltage, then automatically start normal charging cycles.
• Quiet Night Mode (5A): Lowers the output to 5A, allowing for quiet overnight charging without noisy fans. This mode can be activated on any charging setting.

Figure 4 : Caractéristiques principales. This image highlights the main features of the KICKASS 22A Smart Charger: its 22A charging speed, 9-stage smart charging capability, and maximum protection features, emphasizing its versatility and safety.

Produit terminéview Vidéo

5. Entretien

Un entretien adéquat garantit la longévité de votre chargeur et de vos batteries :

• Gardez le chargeur propre et exempt de poussière et de débris.
• Rangez le chargeur dans un endroit sec et frais lorsqu'il n'est pas utilisé.
• Inspect cables and connectors regularly for any signs of damage. Replace if necessary.
• Assurez une bonne ventilation pendant la charge pour éviter la surchauffe.

6. Dépannage

The LCD screen will display any fault codes to indicate issues with your battery or charger. Refer to the display for specific error messages.

Problèmes courants et solutions :

• Le chargeur ne s'allume pas : Check power connection. Ensure battery connections are correct (polarity protection).
• Fault code displayed: Consult the charger's LCD screen for the specific code. Common codes relate to reverse polarity, short circuit, or over-temperature. Correct the issue as indicated.
• La batterie ne se charge pas: Verify battery type selection matches the connected battery. Check battery health; severely damaged batteries may not accept a charge.

7. Spécifications

Figure 5 : Spécifications du produit. This image presents a detailed table outlining the technical specifications of the KICKASS 22A Smart Charger, including input/output parameters, charging modes, and environmental conditions.

Charging Mode & Recommended Battery Capacity

8. Garantie et assistance

For detailed warranty information and customer support, please refer to the official KICKASS webou contactez votre revendeur.

An electronic version of the Instructions for Use (IFU) is available for download:

Télécharger le mode d'emploi (PDF)