1. Produit terminéview
The LEDONE Microwave Motion Sensor is designed for commercial lighting applications, offering advanced motion detection and 0-10V dimming capabilities. This sensor provides reliable performance across a wide range of environmental conditions, contributing to energy efficiency and automated lighting control.
Figure 1 : Face avant view of the LEDONE Microwave Motion Sensor.
Caractéristiques principales :
- Gradable 0-10V : Compatible with most popular dimmers for commercial projects.
- Détection grand angle à 360° : Detects movement up to 20 feet from any angle.
- Stable et fiable : Operates effectively in temperatures from -40°F to 158°F.
- Économie d'énergie : Automatic on/off functionality based on detected movement.
2. Configuration et installation
Proper installation is crucial for optimal performance. This device is designed for wall mount installation and requires a corded electric connection. Consult a qualified electrician for wiring if you are unfamiliar with electrical installations.
Figure 2 : Côté view of the sensor with wiring connections.
Étapes d'installation :
- Coupure de courant : Ensure power to the installation area is turned off at the circuit breaker before beginning any wiring.
- Montage: Securely mount the sensor to a wall using appropriate hardware. Ensure the sensor has an unobstructed view de la zone de détection.
- Câblage : Connect the sensor to the power supply and lighting fixture according to local electrical codes and the wiring diagram provided with the product packaging. The sensor supports 0-10V dimming; ensure proper connections for this functionality if desired.
- Connexion électrique : Une fois toutes les connexions sécurisées, rétablissez l'alimentation électrique du circuit.
- Test initial : Perform an initial test to ensure the sensor powers on and the connected lights respond.
Configuration:
The sensor can be configured using either DIP switches or a remote control (sold separately). Refer to the specific instructions included with your product for detailed settings related to detection sensitivity, hold time, and daylight harvesting.
3. Mode d'emploi
The LEDONE Microwave Motion Sensor operates by detecting movement within its 360-degree detection zone. Once configured, the sensor will automatically control connected lighting based on presence detection and ambient light levels (if daylight harvesting is enabled).
Opération automatique:
- When motion is detected, the sensor will activate the connected lighting.
- If no motion is detected for a pre-set "hold time," the sensor will either dim the lights (if 0-10V dimming is configured) or turn them off completely.
- The detection range is up to 20 feet, covering a wide area.
Réglage des paramètres :
Settings such as sensitivity, hold time, and dimming levels can be adjusted via the DIP switches on the unit or through a compatible remote control. Consult the specific configuration guide for your model to understand each setting's function and how to adjust it.
4. Entretien
The LEDONE Microwave Motion Sensor is designed for minimal maintenance. Regular checks can help ensure continued optimal performance.
- Nettoyage: Periodically wipe the sensor's surface with a soft, dry cloth to remove dust or debris. Avoid using abrasive cleaners or solvents.
- Inspection: Annually inspect the wiring connections for any signs of wear or damage. Ensure the sensor is securely mounted.
- Facteurs environnementaux : Ensure the sensor is not obstructed by new installations or objects that could interfere with its detection field.
5. Dépannage
If you encounter issues with your LEDONE Microwave Motion Sensor, refer to the following common troubleshooting steps:
| Problème | Cause possible | Solution |
|---|---|---|
| Lights do not turn on with motion. |
|
|
| Lights remain on or turn on without motion. |
|
|
| La fonction de variation d'intensité lumineuse ne fonctionne pas. |
|
|
If the problem persists after attempting these solutions, contact LEDONE customer support for further assistance.
6. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Marque | LEDONE |
| Numéro de modèle | 0-10V DIMMING (LOD-BRI810-B-D) |
| Couleur | Blanc |
| Source d'énergie | Corded Electric (120-277 Vac) |
| Portée maximale | 20 pieds |
| Type de montage | Support mural |
| Angle de détection | 360 degrés |
| Température de fonctionnement | -40°F à 158°F |
| Dimensions du produit | 4.17 x 1.6 x 1.46 pouces |
| Poids de l'article | 1 livre |
7. Informations sur la garantie
LEDONE products are manufactured to high standards. For specific warranty terms and conditions applicable to your Microwave Motion Sensor, please refer to the documentation included with your purchase or visit the official LEDONE website. LEDONE is based in California and aims to provide quality products and services.
8. Assistance clientèle
For technical assistance, troubleshooting beyond this manual, or inquiries regarding your LEDONE Microwave Motion Sensor, please contact LEDONE customer support.
You can typically find contact information on the LEDONE official websur le site ou auprès du détaillant où le produit a été acheté.
Ressources en ligne : Visitez le LEDONE Store on Amazon pour plus d'informations sur les produits et l'assistance.
