Nokia WiFi Beacon 1 Mesh System: AC1200 Whole Home WiFi Instruction Manual

1. Introduction

Welcome to the Nokia WiFi Beacon 1 Mesh System. This high-performance whole home WiFi solution is designed to replace your existing router, providing seamless AC1200 throughput and resolving common WiFi interference issues. With its advanced mesh technology, the Beacon 1 ensures robust and reliable internet connectivity throughout your home.

2. Produit terminéview

Caractéristiques principales :

• Couverture complète de la maison : A 3-pack system covers up to 4500 square feet, eliminating dead zones.
• Haute performance : Supports AC1200 throughput for fast and reliable internet.
• Maillage piloté par l'IA : Intelligently optimizes your network for the best connection.
• Itinérance transparente : Stay connected as you move throughout your home with a single Wi-Fi name.
• Prise en charge étendue des appareils : Permet de connecter jusqu'à 150 appareils simultanément.
• Sécurité avancée : Features WPA2 and WPA3 encryption for a secure network.
• Contrôle parental : Manage internet access and content for family members via the app.
• Installation facile : Guided installation through the intuitive Nokia WiFi app.

Composants:

The Nokia WiFi Beacon 1 system typically includes:

• Nokia WiFi Beacon 1 units (e.g., 3 units for a Trio pack)
• Power adapters for each Beacon
• Câble Ethernet
• Guide d'installation rapide

Figure 1 : Face avant view of a single Nokia WiFi Beacon 1 unit.

Figure 2 : Arrière view of the Nokia WiFi Beacon 1, showing LAN/WAN ports and power input.

3. Guide de configuration

3.1. Déballage et préparation initiale

1. Déballez soigneusement tous les composants de la boîte.
2. Téléchargez le Nokia WiFi app from your device's app store (available on iOS and Android).
3. Ensure your existing modem is powered off and disconnected from your old router.

3.2. Connecting the Primary Beacon

4. Place one Nokia WiFi Beacon 1 unit near your modem. This will be your primary Beacon.
5. Connectez une extrémité du câble Ethernet fourni au Réseau étendu/réseau local port (blue) on the primary Beacon.
6. Connectez l'autre extrémité du câble Ethernet au port Ethernet de votre modem.
7. Connect the power adapter to the primary Beacon and plug it into a power outlet.
8. Power on your modem, then power on the primary Beacon. Wait for the LED indicator on the Beacon to turn solid blue or green, indicating it's ready for setup.
9. Open the Nokia WiFi app and follow the on-screen instructions to configure your new network.

3.3. Adding Additional Beacons

9. Once the primary Beacon is set up, place the additional Beacon units in other areas of your home where you need improved Wi-Fi coverage. For optimal coverage, place them strategically to cover up to 4500 sq ft for a 3-pack system.
10. Connect the power adapter to each additional Beacon and plug it into a power outlet.
11. Wait for the LED indicator on each additional Beacon to turn solid blue or green.
12. In the Nokia WiFi app, select the option to add a new Beacon and follow the instructions to integrate them into your mesh network.

Figure 3: Using the Nokia WiFi app for easy setup and management.

Figure 4: Coverage illustration for 1, 2, and 3 Nokia WiFi Beacon units, demonstrating dead zone elimination.

4. Mode d'emploi

4.1. Using the Nokia WiFi App

The Nokia WiFi app is your central control panel for managing your mesh network. It allows you to:

• View connected devices and their signal strength.
• Set up parental controls to manage internet access for specific devices or users.
• Create a guest network for visitors, keeping your main network secure.
• Monitor network security and receive alerts.
• Perform network diagnostics and optimize performance.

4.2. Connexions câblées

Each Nokia WiFi Beacon 1 unit is equipped with 4 Ethernet ports (WAN/LAN and LAN) supporting 2.5G wired backhaul and LAN connections. This allows you to connect devices such as gaming consoles, smart TVs, or network-attached storage (NAS) directly to a Beacon for maximum speed and stability.

4.3. État de l'indicateur LED

The LED light at the base of each Beacon indicates its current status:

• Vert uni : All is well, Beacon is connected and operating normally.
• Bleu uni : Setting up or booting up.
• Jaune uni : Startup in progress.
• Rouge uni : Has an issue (refer to troubleshooting section).

5. Entretien

5.1. Mises à jour du micrologiciel

Regular firmware updates are crucial for maintaining optimal performance, security, and access to new features. The Nokia WiFi app will notify you when updates are available and guide you through the installation process. Ensure your Beacons remain powered on during updates.

5.2. Cleaning Your Beacons

To ensure proper ventilation and longevity, periodically clean your Beacon units with a soft, dry cloth. Avoid using liquid cleaners or abrasive materials.

5.3. Réinitialisation de l'appareil

If you encounter persistent issues, you may need to reset a Beacon to its factory settings. Locate the reset button (often a small pinhole) on the back or bottom of the unit. Use a paperclip to press and hold the button for approximately 10 seconds until the LED indicator changes, then release. This will erase all custom settings, and you will need to reconfigure the Beacon via the app.

6. Dépannage

Problèmes courants et solutions :

• Pas de connexion Internet:
  • Vérifiez si votre modem fonctionne correctement.
  • Assurez-vous que tous les câbles Ethernet sont correctement connectés.
  • Restart your modem and all Nokia WiFi Beacons.
• Signal Wi-Fi faible :
  • Relocate Beacons to optimize coverage, ensuring they are not too far apart or obstructed by thick walls.
  • Vérifiez les sources d'interférences (par exemple, les fours à micro-ondes, les téléphones sans fil).
• L'appareil ne peut pas se connecter :
  • Vérifiez le mot de passe Wi-Fi.
  • Ensure the device is within range of a Beacon.
  • Redémarrez l'appareil auquel vous essayez de vous connecter.
• LED Indicator is Red:
  • This indicates a problem. Check your internet connection and the connections between your Beacons.
  • Try restarting the affected Beacon and your primary Beacon.

For further assistance, consult the Nokia WiFi app's help section or visit the Nokia support website.

7. Spécifications

8. Garantie et assistance

The Nokia WiFi Beacon 1 Mesh System comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the documentation included with your product or visit the official Nokia support website. For technical support, troubleshooting, or service inquiries, please contact Nokia customer service or use the support features within the Nokia WiFi app.