Introduction
The 8Bitdo Gbros. Wireless Adapter allows you to connect your original wired GameCube, NES Classic Edition, SNES Classic Edition, and Wii Classic controllers wirelessly to your Nintendo Switch or Windows PC. This adapter provides a seamless gaming experience with your favorite classic controllers.
Ce qui est inclus
- GBros. Adapter
- Bande de câble
- Câble USB
- Manuel d'instructions
Installation
Image : Haut view of the 8Bitdo Gbros. Wireless Adapter, a blue oval-shaped device with green, red, gray, and yellow buttons.
1. Installation de la batterie
The Gbros. Adapter requires two AA batteries for wireless operation. To install the batteries:
- Open the battery compartment cover on the back of the adapter.
- Insérez deux piles AA en respectant la polarité (+/-).
- Fermez soigneusement le couvercle du compartiment à piles.
Alternatively, the adapter can be powered via the included USB cable when connected to a power source or a compatible device.
2. Connexion de votre manette
Plug your wired GameCube, NES Classic Edition, SNES Classic Edition, or Wii Classic controller into the appropriate port on the Gbros. Adapter.
Image : Côté view of the 8Bitdo Gbros. Wireless Adapter showing the GameCube controller port.
Image : Côté view of the 8Bitdo Gbros. Wireless Adapter showing the Micro USB port for power or connection.
3. Appairage avec la Nintendo Switch
- Sur votre Nintendo Switch, accédez au menu HOME.
- Sélectionner Contrôleurs, alors Changer la prise/l'ordre.
- Slide the switch on the Gbros. Adapter to the S position (for Switch mode).
- Press and hold the yellow button on the Gbros. Adapter for a few seconds until the blue LED starts blinking rapidly.
- The adapter will pair with your Nintendo Switch. Once paired, the blue LED will become solid.
Image: A GameCube controller connected to the 8Bitdo Gbros. adapter, which is wirelessly paired with a Nintendo Switch in handheld mode, displaying Super Smash Bros. Ultimate.
Image: An SNES Classic controller connected to the 8Bitdo Gbros. adapter, wirelessly paired with a Nintendo Switch in handheld mode, displaying a retro-style game.
Image: A Wii Classic controller connected to the 8Bitdo Gbros. adapter, wirelessly paired with a Nintendo Switch in handheld mode, displaying Mario Kart.
4. Connexion à un PC Windows
- Slide the switch on the Gbros. Adapter to the X position (for X-input mode, compatible with Windows).
- Connect the Gbros. Adapter to your Windows PC via the included USB cable or pair wirelessly via Bluetooth.
- Your PC should recognize the adapter as an X-input device.
Image: Two 8Bitdo Gbros. adapters, one connected to a Nintendo Switch and another near a tablet, demonstrating multi-device compatibility.
5. Mise à jour du micrologiciel
It is recommended to regularly check for and install firmware updates for your Gbros. Adapter to ensure optimal performance and compatibility with the latest system updates. Visit the official 8Bitdo support website pour obtenir le dernier firmware et les instructions de mise à jour.
Mode d'emploi
Once paired, your connected wired controller will function wirelessly as a standard Nintendo Switch Pro Controller or an X-input controller on Windows.
- Le Bouton rouge on the Gbros. Adapter acts as the MAISON button for Nintendo Switch.
- Le Bouton vert on the Gbros. Adapter acts as the Screenshot/Capture button for Nintendo Switch.
- Le S/X Switch allows you to toggle between Nintendo Switch mode (S) and Windows X-input mode (X).
For specific button mappings of your classic controller to the modern system, refer to the in-game controller settings or the 8Bitdo support documentation.
Vidéo : Un overview of the 8Bitdo Gbros. Wireless Adapter, demonstrating its features and compatibility with wired GameCube and Classic Edition controllers for Nintendo Switch.
Entretien
- Keep the adapter clean and free from dust and moisture. Use a soft, dry cloth for cleaning.
- Évitez d'exposer l'adaptateur à des températures extrêmes ou à la lumière directe du soleil.
- Remove batteries if the adapter will not be used for an extended period to prevent leakage.
Dépannage
- L'adaptateur ne se connecte pas : Ensure the adapter is in the correct mode (S for Switch, X for Windows) and that batteries are correctly installed or the USB cable is connected. Try re-pairing by holding the yellow button.
- Le contrôleur ne répond pas : Check the connection between your wired controller and the Gbros. Adapter. Ensure the adapter is successfully paired with your console/PC.
- Lag or disconnection issues: Ensure the adapter's firmware is up to date. Reduce interference by moving closer to the console/PC or away from other wireless devices.
Caractéristiques
| Dimensions du produit | 4.06 x 1.14 x 1.38 pouces |
| Poids de l'article | 1.6 onces |
| Fabricant | 8Bitdo |
| Numéro de modèle de l'article | 6922621500858 |
| Piles | 2 piles AA requises (non incluses) |
| Appareils compatibles | Nintendo Switch, Windows PC (X-input) |
| Type de connecteur | Micro USB (for power/wired connection) |
Garantie et assistance
Pour obtenir des informations sur la garantie, une assistance technique ou toute autre aide, veuillez consulter le site officiel de 8Bitdo. website: www.8bitdo.com.
