Lepro EAN1500035-DW-EU

Lepro 11-inch 24W LED Flush Mount Ceiling Light User Manual

Model: EAN1500035-DW-EU

1. Introduction

This manual provides essential information for the safe installation, operation, and maintenance of your Lepro 11-inch 24W LED Flush Mount Ceiling Light. Please read these instructions thoroughly before installation and retain them for future reference.

2. Consignes de sécurité

  • AVERTISSEMENT: Risque de choc électrique. Coupez l'alimentation au niveau du tableau électrique ou du disjoncteur avant toute installation ou intervention.
  • Ce produit doit être installé conformément au code d’installation applicable par une personne connaissant la construction et le fonctionnement du produit ainsi que les dangers encourus.
  • Assurez-vous que tous les branchements électriques sont bien fixés et conformes aux codes et règlements locaux.
  • Ne modifiez pas le dispositif. Toute modification peut annuler la garantie et présenter un risque pour la sécurité.
  • This fixture is rated IP54 for water and dust resistance, making it suitable for damp locations like bathrooms. However, it is not submersible.
  • This light fixture is NOT DIMMABLE. Do not connect to a dimmer switch.

3. Contenu de la boîte

Vérifiez que tous les composants sont présents avant de commencer l'installation :

  • Lepro 11-inch LED Flush Mount Ceiling Light
  • Matériel de montage (vis, chevilles)
Contents of the box including the LED ceiling light and mounting hardware

Image: The Lepro 11-inch LED Flush Mount Ceiling Light with its included mounting bracket and screws.

4. Produit terminéview et spécifications

Caractéristiques principales :

  • IP54 Water Resistant and Dust Proof: Sealed design protects against splashing water and dust, suitable for bathrooms and damp emplacements.
  • Slim Design and Long Lifespan: Blends seamlessly with any interior style, ideal for low or sloped ceilings. Integrated LED lights are rated for over 20,000 hours of use.
  • 5000 Kelvin Daylight White Light: Provides a cool, crisp, natural light feel, suitable for various rooms.
  • Efficacité énergétique : 24 watts, equivalent to a 200-watt incandescent lamp, saving up to 88% on energy.
  • High Illumination and Color Rendering: 2400 lumens, illuminating 15-20 square meters (150-220 square feet). CRI > 80 ensures accurate color representation.
  • Application polyvalente : Suitable for bedroom, kitchen, bathroom, porch, balcony, laundry room, entryway, foyer, lobby, corridor, dining hall, closet, utility room, or any other indoor/outdoor area.
  • Non dimmable : This fixture is not compatible with dimmer switches.

Spécifications techniques :

SpécificationValeur
MarqueLépreux
Nom du modèleLepro 11 inch Flush Mount LED Ceiling Light
Numéro de modèleEAN1500035-DW-EU
Taille11-inch (28cm diameter, 1.97" height)
CouleurBlanc lumière du jour
MatérielPlastique, Polycarbonate
Quoitage24 watts
Rendement lumineux2400 lumens
Température de couleur5000 Kelvin
Indice de rendu des couleurs (IRC)>80
Niveau de résistance à l'eauIP54 (étanche)
Type d'installationPlafonnier
Source d'énergieAC
Voltage240 volts
Durée de vie>20,000 XNUMX heures
Type de commutateurPush Button (external switch, not included)
Utilisations recommandéesKitchen, Bathroom, Porch, Laundry Room, Basement, Hallway
Diagram showing the dimensions of the 11-inch and 8.7-inch models, and their wattage, diameter, and illuminated range.

Image: Size comparison and illumination range for different wattage modèles.

5. Configuration et installation

Important: Ensure power is turned OFF at the circuit breaker before starting installation.

Guide vidéo d'installation :

Video: Official Lepro installation instructions for ceiling lights.

Installation étape par étape :

  1. Step 1: Remove the Mounting Bracket. Gently press the bracket lock to detach the mounting bracket from the light fixture.
  2. Step 2: Measure Hole Spacing. Use the mounting bracket to mark the desired drill points on your ceiling. Ensure the spacing is appropriate for your ceiling type (wooden, cement, or junction box).
  3. Step 3: Install Mounting Bracket.
    • Pour Plafond en bois: Secure the bracket directly with screws.
    • Pour Plafond De Ciment: Drill two holes, insert wall anchors, then secure the bracket with screws.
    • Pour Boîte de jonction: Align the bracket with the junction box and secure it using the provided screws.
  4. Step 4: Paste Anti-Scratch Pads. Apply the provided anti-scratch pads to the back of the lamp body to protect the ceiling surface.
  5. Étape 5 : Connectez les fils. Open the waterproof wire compartment on the back of the fixture. Insert the live (L) and neutral (N) wires from your ceiling into the corresponding electrical connections. Ensure a secure connection.
  6. Step 6: Push in the Ceiling Light. Align the light fixture with the installed mounting bracket. Push the fixture upwards and twist clockwise until it locks securely into place.
Detailed diagram of the 6-step installation process for the Lepro ceiling light.

Image : Guide visuel du processus d'installation en 6 étapes.

6. Mode d'emploi

Once installed, restore power at the circuit breaker. Operate the light using your standard wall switch. This fixture provides a consistent 5000K Daylight White light and is non dimmable.

7. Entretien

  • Nettoyage: Assurez-vous que l'alimentation est coupée avant de nettoyer. Essuyez le luminaire avec un chiffon doux et sec.amp chiffon. N'utilisez pas de nettoyants abrasifs ou de solvants.
  • Remplacement de l'ampoule : This fixture uses integrated LED lights and does not require bulb replacement. The LEDs are designed to last over 20,000 hours.
  • Inspection: Vérifiez régulièrement l'appareil pour détecter tout signe de dommage ou de connexion desserrée. En cas de problème, coupez l'alimentation et consultez un électricien qualifié.

8. Dépannage

ProblèmeCause possibleSolution
La lumière ne s'allume pas.Pas d'alimentation à l'appareil.
Connexion filaire lâche.
Interrupteur mural défectueux.
Vérifiez le disjoncteur.
Ensure wires are securely connected (power off first).
Tester l'interrupteur mural.
La lumière clignote.Connexion filaire lâche.
Interrupteur variateur incompatible.
Vérifiez les connexions des câbles (coupez l'alimentation au préalable).
This fixture is non-dimmable; ensure it's not connected to a dimmer.
La lumière est trop faible.Incorrect room size for light output.Ensure the light's illumination range (15-20 sq. meters) is suitable for your room.

9. Garantie et assistance

This Lepro LED Flush Mount Ceiling Light comes with a Garantie limitée. For specific warranty terms, conditions, and to register your product, please visit the official Lepro website ou contactez leur support client.

For technical support or further assistance, please contact Lepro customer service:

  • Website: www.lepro.com (or refer to product packaging for specific regional contact information)

Documents connexes - EAN1500035-DW-EU

Préview Guide d'utilisation du plafonnier LED Lepro : Installation et spécifications
Guide d'utilisation détaillé pour les plafonniers LED Lepro, comprenant les spécifications du modèle, les instructions d'installation, les informations de sécurité et les dimensions des séries PR1500024 et PR1500035.
Préview Guide d'utilisation et instructions d'installation du plafonnier LED Lepro
Guide d'utilisation complet pour les plafonniers LED Lepro, comprenant les instructions d'installation, les précautions de sécurité, les spécifications du modèle et la liste de colisage pour les modèles PR150003, PR150004 et PR150005.
Préview Mur solaire Lepro Lamp Manuel d'utilisation 640003-DW
Manuel d'utilisation du Lepro Solar Wall LampModèle 640003-DW. Comprend les spécifications, les instructions d'installation et les notes d'utilisation de cette solution d'éclairage écoénergétique.
Préview Mur solaire Lepro Lamp Manuel d'utilisation
Manuel d'utilisation du Lepro Solar Wall Lamp, fournissant les instructions d'installation, d'utilisation et d'entretien. Ses caractéristiques comprennent des angles d'éclairage réglables, la détection de mouvement et la résistance aux intempéries.
Préview Mur solaire Lepro Lamp Manuel d'utilisation et guide d'installation (Modèle 640003-DW)
Manuel d'utilisation complet et guide d'installation pour le mur solaire Lepro Lamp (Modèle 640003-DW). Découvrez les spécifications, l'installation, le fonctionnement et l'entretien.
Préview Guide d'installation et d'utilisation du downlight LED intelligent Lepro R2
Guide complet pour l'installation et l'utilisation du downlight LED intelligent Lepro R2, couvrant la connexion à l'application, la configuration de la commande vocale, le montage et les informations de sécurité.