FENVI FV-AC1200 Wireless WiFi Card Instruction Manual

1. Introduction

The FENVI FV-AC1200 is a high-performance PCI-E wireless adapter designed for desktop computers, offering dual-band Wi-Fi connectivity and Bluetooth 4.0 capabilities. This adapter supports the IEEE 802.11ac standard, providing fast and stable internet speeds on both 2.4GHz and 5GHz frequencies. With a maximum transmission speed of 1200Mbps, it is ideal for online gaming, HD video streaming, and general internet use. The integrated Bluetooth 4.0 allows for seamless connection with various Bluetooth-enabled peripheral devices.

2. Contenu du colis

Veuillez vérifier que le colis contient les éléments suivants :

• FENVI FV-AC1200 Desktop Wireless Adapter Card
• High Gain Dual Band Antennas (x2)
• Bluetooth USB Cable (9-pin)
• Driver CD
• Full-Height Bracket (12cm)
• Bas-Profile Bracket (8cm)
• Manuel d'instructions

3. Spécifications

4. Configuration et installation

4.1 Installation du matériel

1. Préparez votre ordinateur : Éteignez votre ordinateur et débranchez le cordon d'alimentation. Ouvrez le boîtier de l'ordinateur.
2. Select a PCI Express slot: Locate an available PCI Express x1, x4, x8, or x16 slot on your motherboard.
3. Install the adapter card: Carefully insert the FENVI FV-AC1200 adapter card into the chosen PCI Express slot until it is firmly seated. Secure the card with a screw if your case requires it. If your computer case is a low-profile design, you may need to replace the pre-installed full-height bracket (12cm) with the included low-profile bracket (8cm).
4. Connect the Bluetooth cable: Connect the 9-pin USB cable (black end) to an available 9-pin USB 2.0 header on your motherboard. Connect the white end of the cable to the dedicated Bluetooth connector on the FV-AC1200 adapter card. This connection is essential for Bluetooth functionality.
5. Attach the antennas: Screw the two high-gain dual-band antennas onto the connectors on the back of the adapter card. Ensure they are securely tightened.
6. Fermez le boîtier de l'ordinateur : Once the card and antennas are installed, close your computer case and reconnect the power cord.

4.2 Installation du pilote

After hardware installation, you need to install the necessary drivers for both Wi-Fi and Bluetooth functionality. The drivers are separate and both must be installed.

1. Télécharger les pilotes : If your computer does not have an optical drive for the included CD, or for the latest drivers, please download them from the official FENVI website: https://www.fenvi.com/drive.html?keyword=FV-AC1200.
2. Installer le pilote Wi-Fi : Exécutez le programme d'installation du pilote Wi-Fi file et suivez les instructions à l'écran.
3. Installez le pilote Bluetooth : Exécutez le programme d'installation du pilote Bluetooth file et suivez les instructions à l'écran.

Note: This adapter is compatible with Microsoft Windows 7, 8, 10, and 11. Linux drivers are not officially provided by Fenvi at this time. It is not compatible with IBM/Lenovo/HP version desktops.

5. Mode d'emploi

5.1 Connectivité Wi-Fi

Once the Wi-Fi driver is successfully installed, your computer should detect available wireless networks. You can connect to a Wi-Fi network by:

1. Clicking on the Wi-Fi icon in your system tray (usually bottom-right corner of the screen).
2. Selecting your desired network from the list.
3. Entering the network password if prompted.

The FV-AC1200 supports dual-band operation, allowing you to connect to either 2.4GHz or 5GHz networks. The 5GHz band generally offers higher speeds and less interference, while the 2.4GHz band provides a wider range.

5.2 Connectivité Bluetooth

With the Bluetooth driver installed and the USB cable connected, your computer's Bluetooth functionality will be enabled. To connect Bluetooth devices:

1. Assurez-vous que l'appareil Bluetooth que vous souhaitez connecter est en mode appariement.
2. Accédez aux paramètres Bluetooth de votre ordinateur (par exemple, Paramètres Windows > Périphériques > Bluetooth et autres périphériques).
3. Cliquez sur « Ajouter un appareil Bluetooth ou autre » et sélectionnez « Bluetooth ».
4. Choose your device from the list and follow any on-screen prompts to complete pairing.

5.3 Vidéo de démonstration du produit

6. Entretien

• Keep Antennas Secure: Ensure the external antennas are always securely attached to the adapter card for optimal signal reception.
• Mises à jour du pilote: Periodically check the FENVI official webSite proposant des pilotes mis à jour pour garantir des performances et une compatibilité optimales.
• Propreté: Keep your computer's interior clean to prevent dust buildup on the adapter, which can affect performance and longevity.

7. Dépannage

7.1 Bluetooth ne fonctionne pas

• Check USB Cable Connection: Ensure the 9-pin USB cable is correctly connected from the adapter card to a 9-pin USB 2.0 header on your motherboard. This cable is crucial for Bluetooth functionality.
• Installez le pilote Bluetooth : Verify that the Bluetooth driver has been installed. If not, install it from the provided CD or the FENVI website.

7.2 Le Wi-Fi ne fonctionne pas

• Vérifier le Gestionnaire de périphériques : Open Device Manager on your computer. If you see a network controller with a yellow exclamation mark, it indicates a driver issue. Install or manually update the Wi-Fi driver. Even if the driver is installed, a yellow warning might appear; right-click, select 'Update driver', and manually point to the driver file chemin.
• M.2 Hard Disk Conflict: Check if there is an M.2 hard disk on your motherboard that might be causing a hardware function conflict with the PCI-E slot. If so, the M.2 hardware in the parallel channel may need to be unplugged.
• Connexion d'antenne: Ensure both antennas are securely connected to the adapter card.
• Disable Built-in Wi-Fi: If your desktop computer has a built-in Wi-Fi function, disable it in your computer's settings or Device Manager when using the FENVI FV-AC1200.

7.3 Problèmes de compatibilité

• AMD Chipsets: This adapter is NOT compatible with AMD chipset motherboards.
• Specific Desktop Brands: This adapter is not suitable for IBM/Lenovo/HP version desktops.
• Linux Support: Currently, official drivers are only provided for Windows 7/8/10/11. Linux support is not available.

8. Conseils d'utilisation

• Separate Drivers: Remember that Wi-Fi and Bluetooth require separate driver installations. Ensure both are installed for full functionality.
• Connexions physiques : Always double-check all physical connections, especially the Bluetooth USB cable and antenna tightness, if you encounter connectivity issues.
• Source du pilote : For the most up-to-date and compatible drivers, always refer to the official FENVI website.

9. Garantie et assistance

For any problems related to drivers, instructions, or general product support, please feel free to contact FENVI Customer Service:

• E-mail: ktt@fenvi.cn
• Official Driver Download Page: https://www.fenvi.com/drive.html?keyword=FV-AC1200

Un manuel d'utilisation au format PDF est également disponible en téléchargement : Manuel d'utilisation (PDF)