FPG INLINE 4000 Series 1800 Freestanding/Square Controlled Ambient Owner's Manual

Chassis Construction: Stainless 304 and mild steel
Electrical Data:
- Voltage: 220-240 V Single
- Phase: ACR (Option)
- Current: 4.9 A (ACR), 1.7 A (Option)
- E24H (kWh): 21.60 (ACR), 9.60 (Option)
- kWh per hour (average): 0.90 (ACR), 0.40 (Option)

Product Usage Instructions

Installation

To install the product, follow these steps:

Ensure unobstructed airflow around the unit for optimal performance.

Cutout dimensions: IN-4CA18-SQ-XX-FS models require a benchtop cutout of 1775 x 755mm with a joinery height of 560mm.
If installing next to an Inline 4000 Series refrigerated cabinet, use a thermal divider panel between them.

Contact FPG to configure the cabinet for joinery installation.

Maintenance

Regularly clean the unit and check for any blockages in the airflow to maintain optimal performance.

Troubleshooting

If you encounter any issues with the product, refer to the product manual for troubleshooting steps. Contact customer support if problems persist.

Specifications

RANGE	INLINE 4000 SERIES
TEMPERATURE	CONTROLLED AMBIENT
MODEL	IN-4CA18-SQ-FF-FS	IN-4CA18-SQ-SD-FS
FRONT	SQUARE/ FIXED FRONT	SQUARE/ SLIDING DOORS
INSTALLATION	FREESTANDING
REFRIGERATION	INTEGRAL, R513A
HEIGHT	1405mm
WIDTH	1803mm
DEPTH	778mm

CORE PRODUCT TEMPERATURE	+16°C – +18°C
ENVIRONMENTAL TEST CONDITIONS	CLIMATE CLASS 3 25˚C / 60% RH

FEATURES

High energy efficiency: 0.90 kWh per hour (average)

Maintains an average of +16°C – +18°C core product temperature at Climate Class 3 25°C/60%RH with up to 85 door openings per hour
Smart display with double-glazed glass encased in brushed stainless steel frame

Fixed Front or Sliding Doors Controlled Ambient Display

Three tiltable, height-adjustable stainless steel shelves and base are full cabinet width to support maximum display capacity
50,000 hour LED lighting system at 2758 lumens per metre in cabinet top and to each shelf
Unique shelf mounted ticket strip front and rear: 30mm

Operational Excellence

Sliding doors (staff side) and fixed front or sliding doors options (customer side)
High internal humidity maintains and extends shelf life
Constructed from stainless and mild steel with fully double-glazed, toughened safety glass for maximum energy efficiency, climate control and durability
FPG Freeflow air ventilation at rear eliminates the need for front ventilation panels
Fitted with adjustable 150mm legs (+30mm adjustment)

OPTIONS & ACCESSORIES

Contact a FPG Sales Representative for our full range, including:

Remote refrigeration with TX, EPR or Solenoid valvesfor connection
Shelf trays: Toughened safety glass or mild steel. Colour and woodprint options available for steel shelf trays
Angled base insert
Branded decals

Rear door or end glass mirror application
Auto Condensate Removal (ACR)
Adjustable 100mm legs (+25mm adjustment), lockable castors or unidirectional rollers

Forward-facing controls
Chassis configured for joinery installation
Rear deck assemblies

Thermal divider panels
Custom joinery solution

REFRIGERATION DATA

MODEL	CORE PRODUCT TEMPERATURE	ENVIRONMENTAL TEST CONDITIONS	REFRIGERATION	REFRIGERANT	CONDENSATE REMOVAL
IN-4CA18-SQ-XX-FS	+16°C – +18°C	Climate Class 3 – 25˚C / 60% RH	Integral	R513A	Manual/ACR1

1Option.

ELECTRICAL DATA

MODEL	VOLTAGE	PHASE	CURRENT	E24H (kWh)	kWh per hour (average)	IP RATING	MAINS		LED LIGHTING
							CONNECTION	CONNECTION PLUG2	HOURS	LUMENS	COLOUR
IN-4CA18-SQ-XX-FS	220-240 V	Single	4.9 A	21.60	0.90	IP 20	3 metre, 3 core cable	10 amp, 3 pin plug	50,000	2758 per metre	Natural
ACR (Option)			1.7 A	9.60	0.40

2Please advise country to change plug specification.

CAPACITY, ACCESS & CONSTRUCTION

MODEL	DISPLAY AREA	LEVELS	ACCESS FRONT	ACCESS REAR	DOOR OPENINGS @ +16°C – +18°C	CHASSIS CONSTRUCTION
IN-4CA18-SQ-FF-FS	3.0 m2	3 Shelves + Base	Fixed front	Sliding doors	85 per hour	Stainless 304 and mild steel
IN-4CA18-SQ-SD-FS	3.0 m2	3 Shelves + Base	Sliding doors	Sliding doors	85 per hour	Stainless 304 and mild steel

DIMENSIONS

MODEL	H x W x D mm (Uncrated)	MASS (Uncrated)
IN-4CA18-SQ-XX-FS	1405 x 1803 x 778	290 kg

Crated weights and dimensions vary. Please contact us for information on your shipment.

Installation note;

Model cutout dimensions: IN-4CA18-SQ-XX-FS models require 1775 x 755mm benchtop cutout. Joinery height 560mm (see product manual for installation guide). When installing this cabinet next to an adjacent Inline 4000 Series refrigerated cabinet, please install an Inline 4000 Series thermal divider panel (accessory) between them.
Please contact FPG to configure this freestanding cabinet for joinery installation option.

UNOBSTRUCTED AIRFLOW MUST BE MAINTAINED TO ENSURE UNIT PERFORMANCE AND MAINTAIN WARRANTY.

DIMENSIONS

MORE INFORMATION

More information including technical data and installation guidelines is available from the Product Manual published on our website.
In line with our policy to continually develop, improve and support our products, Future Products Group Ltd reserves the right to change specifications and design without notice.
Have a question? Please email us at sales@fpgworld.com or visit www.fpgworld.com for full contact details for your region.

Please contact FPG to discuss your requirements for meeting country-specific standards.
Worldwide contact details: FPGWORLD.COM.

FAQs

Q: Can I change the plug specification for the unit?

A: Yes, please advise your country when ordering to change the plug specification accordingly.

Q: How do I ensure the warranty is maintained?

A: Maintain unobstructed airflow around the unit as specified in the installation instructions to ensure unit performance and warranty validity.

Documents / Resources

FPG INLINE 4000 Series 1800 Freestanding/Square Controlled Ambient [pdf] Owner's Manual
IN-4CA18-SQ-FF-FS, IN-4CA18-SQ-SD-FS, INLINE 4000 Series 1800 Freestanding Square Controlled Ambient, INLINE 4000 Series, 1800 Freestanding Square Controlled Ambient, Freestanding Square Controlled Ambient, Square Controlled Ambient, Controlled Ambient, Ambient

References

User Manual

FPG INLINE 4000 Series 1800 Freestanding/Square Controlled Ambient

PRODUCT INFORMATION