FPG INLINE 4000 Series 1200 Freestanding/Curved Heated Counter
Specifications
| RANGE | INLINE 4000 SERIES | |
| TEMPERATURE | HEATED | |
| MODEL | IN-4H12-CU-FF-FS | IN-4H12-CU-SD-FS |
|
FRONT |
CURVED/ FIXED FRONT | CURVED/ SLIDING DOORS |
| INSTALLATION | FREESTANDING | |
| HEIGHT | 1405mm | |
| WIDTH | 1203mm | |
| DEPTH | 774mm | |
| TEMPERATURE RANGE | +30°C – +90°C |
| RECOMMENDED CORE PRODUCT TEMPERATURE | +65°C – +80°C |
| ENVIRONMENTAL TEST CONDITIONS | 22˚C / 65% RH |
Product Usage Instructions
Features
The product features a fixed front or sliding doors heated display for operational excellence.
Heating Data
Heating: Low wattage density element
Electrical Data
- Model: IN-4H12-CU-XX-FS
- Voltage: 220-240 V Single
- Phase: 1
- Current: 7.2 A
- Ratings: 39.8 kWh per hour IP (average)
- Mains Connection: 3 meter, 3 core cable, 10 amp, 3 pin plug
Capacity, Access & Construction
- Display Area: 1.2 m2
- Levels: 3 Shelves
- Access Front: Fixed front or sliding doors based on the model
- Access Rear: Sliding doors based on model
- Chassis Construction: Stainless 304 and mild steel
Dimensions
- H x W x D mm (Uncrated): 1405 x 1203 x 774
- Mass (Uncrated): 140 kg
FEATURES
- High energy efficiency: 1.66 kWh per hour (average)
- Cabinet operating temperature range +30°C – +90°C
- Recommended core product temperature +65°C – +80°C
- Smart display with toughened safety glass encased in brushed stainless steel frame
Fixed Front or Sliding Doors Heated Display
- Three tiltable, height-adjustable stainless steel wire rack shelves are full cabinet width to support maximum display capacity 25,000 hour LED lighting system at 2758 lumens per metre in cabinet top and shelves
- Unique shelf mounted ticket strip front and rear: 30mm
- Extrusions at the top and bottom of the cabinet – front only – are fitted with stainless steel panels that can be replaced with branded inserts
- Integrated ambient rear storage area
Operational Excellence
- Sliding doors (staff side) and fixed front or sliding doors options (customer side)
- Constructed from stainless and mild steel with toughened safety glass and double-glazed end panels for maximum energy efficiency, climate control and durability
- Low wattage density element provides even temperature distribution
- Fitted with adjustable 150mm legs (+30mm adjustment)
OPTIONS & ACCESSORIES
Contact a FPG Sales Representative for our full range, including:
- Shelf trays: Toughened safety glass or mild steel. Colour and woodprint options available for steel shelf trays
- Stainless steel product trays with sides
- Stainless steel pie chutes
- Additional shelf
- Ticket strip to base: 30mm
- Branded decals/inserts
- Rear door or end glass mirror application
- Adjustable 100mm legs (+25mm adjustment), lockable castors or unidirectional rollers
- Forward-facing controls
- Chassis configured for joinery installation
- Rear deck assemblies
- Custom joinery solution
HEATED DATA
| MODEL | TEMPERATURE RANGE | RECOMMENDED CORE
PRODUCT TEMPERATURE |
ENVIRONMENTAL TEST CONDITIONS | HEATING |
| IN-4H12-CU-XX-FS | +30°C – +90°C | +65°C – +80°C | 22˚C / 65% RH | Low wattage density element |
ELECTRICAL DATA
|
MODEL |
VOLTAGE |
PHASE |
CURRENT |
E24H
(kWh) |
kWh per hour (average) | IP
RATING |
MAINS | LED LIGHTING | |||
| CONNECTION | CONNECTION PLUG1 | HOURS | LUMENS | COLOUR | |||||||
| IN-4H12-CU-XX-FS | 220-240 V | Single | 7.2 A | 39.8 | 1.66 | IP 20 | 3 metre, 3 core cable | 10 amp, 3 pin plug | 25,000 | 2758
per metre |
Natural |
1Please advise country to change plug specification
CAPACITY, ACCESS & CONSTRUCTION
| MODEL | DISPLAY AREA | LEVELS | ACCESS FRONT | ACCESS REAR | CHASSIS CONSTRUCTION |
| IN-4H12-CU-FF-FS | 1.2 m2 | 3 Shelves | Fixed front | Sliding doors | Stainless 304 and mild steel |
| IN-4H12-CU-SD-FS | 1.2 m2 | 3 Shelves | Sliding doors | Sliding doors | Stainless 304 and mild steel |
DIMENSIONS
| MODEL | H x W x D mm (Uncrated) | MASS (Uncrated) |
| IN-4H12-CU-XX-FS | 1405 x 1203 x 774 | 140 kg |
Crated weights and dimensions vary. Please contact us for information on your shipment.
Installation note;
- Model cutout dimensions: IN-4H12-CU-XX-FS models require 1180 x 760mm benchtop cutout. Joinery height 560mm (see product manual for installation guide).
- Please contact FPG to configure this freestanding cabinet for joinery installation option.
More information including technical data and installation guidelines is available from the Product Manual published on our website. In line with our policy to continually develop, improve and support our products, Future Products Group Ltd reserves the right to change specifications and design without notice.
Have a question? Please email us at sales@fpgworld.com or visit www.fpgworld.com for full contact details for your region.
Worldwide contact details: FPGWORLD.COM
FAQ
Q: Where can I find more technical data and installation guidelines?
A: More information, including technical data and installation guidelines, is available in the product manual published on our website.
Q: Can I change the plug specification for different countries?
A: Please advise the country to change the plug specification. It is recommended to consult a professional when making electrical modifications.
Q: How can I contact Future Products Group Ltd for further inquiries?
A: For inquiries, please email sales@fpgworld.com or visit www.fpgworld.com for full contact details specific to your region.
Documents / Resources
 |
FPG INLINE 4000 Series 1200 Freestanding/Curved Heated Counter [pdf] Owner's Manual IN-4H12-CU-FF-FS, IN-4H12-CU-SD-FS, IN-4H12-CU-XX-FS, INLINE 4000 Series 1200 Freestanding Curved Heated Counter, INLINE 4000 Series, 1200 Freestanding Curved Heated Counter, Freestanding Curved Heated Counter, Curved Heated Counter, Heated Counter, Counter |