FPG-logo

FPG IN-VH12-A002 Upright Heated Display

FPG-IN-VH12-A002-Upright-Heated-Display-product

UPRIGHT 1200 OPEN FRONT
HEATED WITH 3 SHELVES

RANGE VISAIR UPRIGHT
TEMPERATURE HEATED
MODEL IN-VH12-A002
FRONT OPEN FRONT
INSTALLATION FREESTANDING/ROLLERS
HEIGHT 1480mm
WIDTH 1265mm
DEPTH 736mm
TEMPERATURE RANGE +65°C – +85°C
RECOMMENDED CORE PRODUCT TEMPERATURE +65°C – +80°C
ENVIRONMENTAL TEST CONDITIONS 22˚C / 65% RH

FEATURES

  • High energy efficiency: 2.95 kWh per hour (average)
  • Cabinet operating temperature range +65°C – +85°C Recommended core product temperature +65°C – +80°C
  • Robust open front display, powder coated satin black for a sleek finish

Open Front Heated Display

  • Four full-width display levels: three fixed IWave quartz infrared shelves and heated base
  • Each IWave shelf is brushed stainless steel and is fitted with ticket strip to front: 30mm (height), with caution decal applied. Each shelf is supplied with 2x 575mm width removable aluminium drip trays
  • Pluggable 25,000 hour LED lighting system at 2758 lumens per metre in cabinet top and to each shelf

Operational Excellence

  • Easy ‘plug and play’ installation
  • FPG IWave heating technology uses low-wattage quartz infrared elements complemented with a heating coil in the base for even temperature distribution and extended shelf life
  • Fitted with an electronic controller for energy efficiency
  • Safer for consumers – display surfaces are maintained < + 65°C and the internal air temperature is lower than in many fan-assisted cabinets
  • No noise pollution – this cabinet runs silently
  • Constructed from stainless and mild steel with fully double-glazed, toughened safety glass for maximum energy efficiency, climate control and durability
  • Fitted with protective black buffer rail at base front and sides
  • Fitted with unidirectional rollers and adjustable stabilisers
  • Showing : Visair Upright heated 1200mm freestanding open front cabinet with three IWave shelves and base

OPTIONS & ACCESSORIES

Contact a FPG Sales Representative for our full range, including:

  • Drip trays: Colour and wood print options available
  • Custom colour
  • Branded decals
  • Lockable castors
  • Custom joinery solution

HEATED DATA

MODEL TEMPERATURE RANGE RECOMMENDED CORE PRODUCT TEMPERATURE ENVIRONMENTAL TEST CONDITIONS IWAVE HEATING
IN-VH12-A002 +65˚C – +85˚C +65°C – +80°C 22˚C / 65% RH Low-wattage infrared quartz elements

ELECTRICAL DATA

MODEL VOLTAGE PHASE CURRENT1 E24H2(kWh) kWh per hour average kWh per hour per m2 MAINS LED LIGHTING
CONNECTION CONNECTION PLUG3 HOURS LUMENS COLOUR
IN-VH12-A002 220-240 V Single 17.1 A 70.74 2.95 1.47 Fixed wiring3 N/A 25,000 2758per metre Natural
  1. Current is the maximum potential current draw at 240v with +5% element tolerance.
  2. Nominal power consumption per 24h. i.e: 230V at 0% energy tolerance.
  3. Please see manual for more information.

CAPACITY, ACCESS & CONSTRUCTION

MODEL DISPLAY AREA LEVELS ACCESS FRONT ACCESS REAR CHASSIS CONSTRUCTION IP RATING
IN-VH12-A002 2.00 m2 3 Shelves + Base Open front N/A Stainless 304 and mild steel IP 22

DIMENSIONS

MODEL H x W x D mm (Uncrated) MASS (Uncrated)
IN-VH12-A002 1480 x 1265 x 736 195 kg

Crated weights and dimensions vary. Please contact us for information on your shipment.

FPG-IN-VH12-A002-Upright-Heated-Display- (1) FPG-IN-VH12-A002-Upright-Heated-Display- (2)

  • More information including technical data and installation guidelines is available from the Product Manual published on our website.
  • In line with our policy to continually develop, improve and support our products, Future Products Group Ltd reserves the right to change specifications and design without notice.

Have a question? Please email us at sales@fpgworld.com or visit www.fpgworld.com for full contact details for your region. 07/24 © 2024 Future Products Group Limited

FPG-IN-VH12-A002-Upright-Heated-Display- (3)FPGWORLD.COM

FAQ

  • Q: What is the recommended core product temperature for this unit?
    A: The recommended core product temperature is not specified in the manual. It is advised to monitor and adjust based on your specific product requirements.
  • Q: Can I adjust the height of the shelves?
    A: The shelves are fixed and cannot be adjusted in height. Ensure proper product placement for efficient heating.
  • Q: How do I access technical data and installation guidelines?
    A: More information, including technical data and installation guidelines, is available in the Product Manual published on the manufacturer’s website.

Documents / Resources

FPG IN-VH12-A002 Upright Heated Display [pdf] Owner's Manual
IN-VH12-A002, IN-VH12-A002 Upright Heated Display, IN-VH12-A002, Upright Heated Display, Heated Display

References

Leave a comment

Your email address will not be published. Required fields are marked *