FPG IN-5H08-CU-TF-FS Series Food Display Solutions
Product Usage Instructions
- The product features a tilt front or sliding doors heated display, operational excellence with sliding doors on the staff side and tilt front or sliding doors options on the customer side.
- It is constructed from stainless and mild steel with fully double-glazed, toughened safety glass for energy efficiency and durability.
- The low wattage density element provides even temperature distribution.
- Contact an FPG Sales Representative for the full range of options and accessories available for the product.
- Customization to meet country-specific standards can also be discussed with FPG.
- Refer to the product manual for installation guidelines.
- Model cutout dimensions require a benchtop cutout of 760 x 725mm with a joinery height of 603mm.
- Regularly clean the display area and shelves with a mild detergent and soft cloth.
- Ensure the power cable is not damaged and is connected to a suitable power source.
FAQ
- Q: What is the recommended core product temperature for the unit?
- A: The recommended core product temperature can vary based on the type of products being displayed. It is advisable to set the temperature according to the specific requirements of your products.
- Q: Can the plug specification be changed for different countries?
- A: Yes, please advise the country when purchasing to customize the plug specification accordingly.
- Q: How do I access the front and rear of the unit?
- A: The front access can be through the tilt front or sliding doors, while the rear access is through sliding doors.
5000 SERIES 800 FREESTANDING/CURVED HEATED
| RANGE | INLINE 5000 SERIES | |
| TEMPERATURE | HEATED | |
| MODEL | IN-5H08-CU-TF-FS | IN-5H08-CU-SD-FS |
| FRONT | CURVED/ TILT FRONT | CURVED/ SLIDING DOORS |
| INSTALLATION | FREESTANDING | |
| HEIGHT | 1443mm | |
| WIDTH | 807mm | |
| DEPTH | 789mm | |
| TEMPERATURE RANGE | +55°C – +95°C |
| RECOMMENDED CORE PRODUCT TEMPERATURE | +65°C – +80°C |
| ENVIRONMENTAL TEST CONDITIONS | 22˚C / 65% RH |
FEATURES
High energy efficiency: 1.04 kWh per hour (average)
- Cabinet operating temperature range +55°C – +95°C
- Recommended core product temperature +65°C – +80°C
- Smart display with double-glazed glass encased in brushed stainless steel frame
Tilt Front or Sliding Doors Heated Display
- Three tiltable, height-adjustable stainless steel wire rack shelves are full cabinet width to support maximum display capacity
- 25,000-hour LED lighting system at 2758 lumens per meter in cabinet top and to each shelf
- Unique shelf-mounted ticket strip front and rear: 30mm
Showing: Inline 5000 Series heated 800mm curved freestanding tilt front
Operational Excellence
- Sliding doors (staff side) and tilt front or sliding door options (customer side)
- Constructed from stainless and mild steel with fully double-glazed, toughened safety glass for maximum energy efficiency and durability
- Low wattage density element provides even temperature distribution
- Designed to be installed into joinery
- Fitted with adjustable 150mm legs (+30mm adjustment)
OPTIONS & ACCESSORIES
Contact a FPG Sales Representative for our full range, including:
- Shelf trays: Toughened safety glass or mild steel.
- Colour and wood print options available for steel shelf trays
- Stainless steel product trays with three sides
- Stainless steel pie chutes
- Additional shelf
- Ticket strip to the base: 30mm
- Branded decals
- Rear door or end glass mirror application
- Adjustable 100mm legs (+25mm adjustment), lockable castors, or unidirectional rollers
- External stainless steel chassis surround
- Rear deck assemblies
- Custom joinery solution
SPECIFICATIONS
HEATED DATA
| MODEL | TEMPERATURE RANGE | RECOMMENDED CORE
PRODUCT TEMPERATURE |
ENVIRONMENTAL TEST CONDITIONS | HEATING |
| IN-5H08-CU-XX-FS | +55°C – +95°C | +65°C – +80°C | 22˚C / 65% RH | Low wattage density element |
ELECTRICAL DATA
| MODEL | VOLTAGE | PHASE | CURRENT | E24H
(kWh) |
kWh per hour (average) | IP
RATING |
MAINS | LED LIGHTING | |||
| CONNECTION | CONNECTION PLUG1 | HOURS | LUMENS | COLOUR | |||||||
| IN-5H08-CU-XX-FS | 220-240 V | Single | 6.8 A | 24.96 | 1.04 | IP 22 | 3 meter, 3 core cable | 10 amp, 3 pin plug | 25,000 | 2758
per metre |
Natural |
- Please advise the country to change the plug specification.
CAPACITY, ACCESS & CONSTRUCTION
| MODEL | DISPLAY AREA | LEVELS | ACCESS FRONT | ACCESS REAR | CHASSIS CONSTRUCTION |
| IN-5H08-CU-TF-FS | 0.9 m2 | 3 Shelves | Tilt front | Sliding doors | Stainless 304 and mild steel |
| IN-5H08-CU-SD-FS | 0.9 m2 | 3 Shelves | Sliding doors | Sliding doors | Stainless 304 and mild steel |
DIMENSIONS
| MODEL | H x W x D mm (Uncrated) | MASS (Uncrated) |
| IN-5H08-CU-XX-FS | 1443 x 807 x 789 | 118 kg |
- Crated weights and dimensions vary. Please contact us for information on your shipment.
Installation
Installation note
- Model cutout dimensions: IN-5H08-CU-XX-FS models require a 760 x 725mm benchtop cutout. Joinery height 603mm (see product manual for installation guide).
More information
- More information including technical data and installation guidelines is available from the Product Manual published on our website.
- In line with our policy to continually develop, improve, and support our products, Future Products Group Ltd reserves the right to change specifications and designs without notice.
- Have a question? Please email us at sales@fpgworld.com or visit www.fpgworld.com for full contact details for your region. FPGWORLD.COM
Worldwide contact details:
© 2024 Future Products Group Limited
Documents / Resources
 |
FPG IN-5H08-CU-TF-FS Series Food Display Solutions [pdf] Owner's Manual IN-5H08-CU-TF-FS, IN-5H08-CU-SD-FS, IN-5H08-CU-XX-FS, IN-5H08-CU-TF-FS Series Food Display Solutions, IN-5H08-CU-TF-FS Series, Food Display Solutions, Display Solutions, Solutions |