FPG 4000 Series 1800 in Counter/Curved Controlled Ambient
Product Usage Instructions
Installation
Ensure to maintain unobstructed airflow around the unit for optimal performance and warranty maintenance.
Electrical Connection
Refer to the electrical data provided in the user manual for correct voltage, phase, and current requirements. Make sure to follow proper electrical installation procedures.
Cleaning and Maintenance
Regularly clean the interior and exterior of the unit using mild detergents and a soft cloth. Avoid using abrasive cleaners to prevent damage to surfaces.
Temperature Control
Adjust the temperature settings as per your requirements using the control panel provided. Monitor and adjust settings based on the stored item
| RANGE | INLINE 4000 SERIES | |
| TEMPERATURE | CONTROLLED AMBIENT | |
| MODEL | IN-4CA18-CU-FF-IC | IN-4CA18-CU-SD-IC |
| FRONT | CURVED/ FIXED FRONT | CURVED/ SLIDING DOORS |
| INSTALLATION | IN-COUNTER | |
| REFRIGERATION | INTEGRAL, R513A | |
| HEIGHT | 1268mm | |
| WIDTH | 1803mm | |
| DEPTH | 774mm | |
| CORE PRODUCT TEMPERATURE | +16°C – +18°C |
| ENVIRONMENTAL TEST CONDITIONS | CLIMATE CLASS 3 25˚C / 60% RH |
FEATURES
- High energy efficiency: 0.76 kWh per hour (average)
- Maintains an average of +16°C – +18°C core product temperature at Climate Class 3 25°C/60%RH with up to 85 door openings per hour
- Smart display with double-glazed glass encased in brushed stainless steel frame
Fixed Front or Sliding Doors Controlled Ambient Display
- Three tiltable, height-adjustable stainless steel shelves and base are full cabinet width to support maximum display capacity 50,000 hour LED lighting system at 2758 lumens per metre in cabinet top and to each shelf
- Unique shelf mounted ticket strip front and rear: 30mm
- Extrusion at the top of the cabinet – front only – is fitted with a stainless steel panel that can be replaced with a branded insert
Operational Excellence
- Sliding doors (staff side) and fixed front or sliding doors options (customer side)
- High internal humidity maintains and extends shelf life
- Constructed from stainless and mild steel with fully double-glazed, toughened safety glass for maximum energy efficiency, climate control and durability
- FPG Freeflow air ventilation at rear eliminates the need for front ventilation panels
- Designed to be installed into joinery
Showing : Inline 4000 Series controlled ambient 1800mm curved in-counter fixed front with integral refrigeration
OPTIONS & ACCESSORIES
Contact a FPG Sales Representative for our full range, including:
- Remote refrigeration with TX, EPR or Solenoid valves for connection
- Shelf trays: Toughened safety glass or mild steel. Colour and woodprint options available for steel shelf trays
- Angled base insert
- Branded decals/insert
- Rear door or end glass mirror application
- Auto Condensate Removal (ACR)
- Forward-facing controls
- Thermal divider panels
- Custom joinery solution
REFRIGERATION DATA
| MODEL | CORE PRODUCT TEMPERATURE | ENVIRONMENTAL TEST CONDITIONS | REFRIGERATION | REFRIGERANT | CONDENSATE REMOVAL |
| IN-4CA18-CU-XX-IC | +16°C – +18°C | Climate Class 3 – 25˚C / 60% RH | Integral | R513A | Manual/ACR1 |
ELECTRICAL DATA
| MODEL | VOLTAGE | PHASE | CURRENT | E24H(kWh) | kWh per hour (average) | IPRATING | MAINS | LED LIGHTING | |||
| CONNECTION | CONNECTION PLUG2 | HOURS | LUMENS | COLOUR | |||||||
| IN-4CA18-CU-XX-IC | 220-240 V | Single | 6.0 A | 18.35 | 0.76 | IP 20 | 3 metre, 3 core cable | 10 amp, 3 pin plug | 50,000 | 2758per metre | Natural |
| ACR (Option) | 1.7 A | 9.60 | 0.4 | ||||||||
1Please advise country to change plug specification.
CAPACITY, ACCESS & CONSTRUCTION
| MODEL | DISPLAY AREA | LEVELS | ACCESS FRONT | ACCESS REAR | DOOR OPENINGS @ +16°C – +18°C | CHASSIS CONSTRUCTION |
| IN-4CA18-CU-FF-IC | 2.7 m2 | 3 Shelves + Base | Fixed front | Sliding doors | 85 per hour | Stainless 304 and mild steel |
| IN-4CA18-CU-SD-IC | 2.7 m2 | 3 Shelves + Base | Sliding doors | Sliding doors | 85 per hour | Stainless 304 and mild steel |
DIMENSIONS
| MODEL | H x W x D mm (Uncrated) | MASS (Uncrated) |
| IN-4CA18-CU-XX-IC | 1268 x 1803 x 774 | – kg |
Crated weights and dimensions vary. Please contact us for information on your shipment.
Installation note
Model cutout dimensions: IN-5CA18-SQ-XX-FS models require 1760 x 725mm benchtop cutout. Joinery height 603mm (see product manual for installation guide). When installing this cabinet next to an adjacent Inline 5000 Series refrigerated cabinet, please install an Inline 5000 Series thermal divider panel (accessory) between them.
UNOBSTRUCTED AIRFLOW MUST BE MAINTAINED TO ENSURE UNIT PERFORMANCE AND MAINTAIN WARRANTY.
- More information including technical data and installation guidelines is available from the Product Manual published on our website.
- In line with our policy to continually develop, improve and support our products, Future Products Group Ltd reserves the right to change specifications and design without notice.
- Have a question? Please email us at sales@fpgworld.com or visit www.fpgworld.com for full contact details for your region. 01/25 © 2025 Future Products Group Limited
FAQ
- Q: How do I install the cabinet next to another refrigerated cabinet?
A: When installing this cabinet next to an adjacent Inline 4000 Series refrigerated cabinet, ensure to install an Inline 4000 Series thermal divider panel (accessory) between them for proper functionality. - Q: What should I do if I encounter issues with the product?
A: For any product-related questions or issues, please contact our customer support team at sales@fpgworld.com or visit our website for contact details specific to your region.
Documents / Resources
 |
FPG 4000 Series 1800 in Counter/Curved Controlled Ambient [pdf] Owner's Manual IN-4CA18-CU-FF-IC, IN-4CA18-CU-SD-IC, INLINE, 4000 Series 1800 in Counter Curved Controlled Ambient, 4000 Series, 1800 in Counter Curved Controlled Ambient, in Counter Curved Controlled Ambient, Curved Controlled Ambient, Controlled Ambient, Ambient |
