A67L Smartphone
Specifications:
- Model: XYZ-2000
- Power: 120V, 60Hz, 1000W
- Capacity: 1.5 liters
- Material: Stainless steel
- Dimensions: 10in x 8in x 12in
Product Information:
The XYZ-2000 is a high-performance electric kettle designed for
boiling water quickly and efficiently. It features a durable
stainless steel construction, ensuring long-term use. With a
capacity of 1.5 liters, it is suitable for various hot beverage
preparations.
Product Usage Instructions:
1. Initial Setup:
Before first use, clean the kettle with mild soap and water.
Rinse thoroughly and dry completely.
2. Filling the Kettle:
Open the lid of the kettle and fill it with water up to the
desired level. Do not exceed the maximum capacity indicated.
3. Power On:
Place the kettle on the power base, ensure it is properly
aligned, and plug the base into a power outlet.
4. Boiling Water:
Press the power button to start boiling the water. The kettle
will automatically shut off once the water reaches boiling
point.
5. Pouring and Serving:
Once the water is boiled, carefully pour it into your cup or
teapot using the spout. Serve and enjoy your hot beverage.
Frequently Asked Questions (FAQ):
Q: Is the kettle cordless?
A: Yes, the kettle sits on a power base for heating but can be
easily lifted off for serving without the cord.
Q: Can I boil liquids other than water in this kettle?
A: It is recommended to only use the kettle for boiling water to
maintain its performance and durability.
Q: How do I clean the kettle?
A: Regularly descale the kettle by using a mixture of water and
vinegar. Follow the cleaning instructions provided in the manual
for detailed steps.
FCC Warning 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Absorption Rate (SAR) information: This device meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. This device was tested for typical body-worn operations with the back of the device kept 10mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a appropriate separation distance between the user’s body and the back of the device. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Use only the supplied or an approved antenna.
Documents / Resources
 |
FOXX A67L Smartphone [pdf] User Guide A67L, A67L Smartphone, Smartphone |