Foxwell NT301 OBDII or EOBD Code Reader
Shenzhen Foxwell Technology CO., LTD
QUICK START GUIDE
NT301 OBDD/EOBD CODE READER
The NT301 CAN OBDII/EOBD Code Reader from Gooloo is the easiest and quickest solution for O8D faults. When it comes to diagnosing Check Engine issues you’d never go wrong with the new NT301 code reader. It offers such useful information for entry-level pro and savvy DIYer that they can quickly and efficiently troubleshoot O8D2/EOBD problems on today’s vehicles. In addition, it’s 2.8″ TFT color screen and hot keys for I/M readiness test, and reading/clearing DTCs make it excellent value for money.
Applicable Functions
- Read Codes / • Freeze Frame Data
- Erase Codes / • Live Data
- I/M Readiness / • 02 Sensor Test
- On-board Monitor Test / • Component Test
- Vehicle Information I • Modules Present
- Unit of measure / • DTC GUIDE
Code Reader Descriptions
- A OBD II Cable
- B LCD Display
- C Green LED Display – indicates the engine system is working normally (all monitors on the vehicles are active and performing their diagnostic testing), and no DTCs are found.
- D Yellow LED Display – shows the tool finds a possible problem. Pending DTCs exist or/and some of the vehicle’s emission monitors have not run their diagnostic testing.
- E Red LED Display- indicates there are some problems in one or more of the vehicle’s systems. In this case, the MIL lamp on the instrument panel is on.
- F UP Key
- G DOWN Key
- H LEFT SCROLL KEY -goes to previous character when looking up DTCs. Scrolls back and forth through codes found and through different screens of data. Also it is used to make selection of PIDs when viewing custom PID list, and to view PID graphs.
- I RIGHT SCROLL KEY -goes to next character when looking up DTCs. Scrolls back and forth through codes found and through different screens of data. Also is used to cancel all selections of PIDs when viewing custom PID list.
- J One Click I/M Readiness Key – quick checks state emissions readiness and drive cycle verification.
- K BACK Key
- L ENTER Key
- M Power Switch – reboot the code reader
- N HELP Key -accesses to the Help function and it is also used to update the code reader when long pressed.
- O USB Port
How to Use NT301?
Retrieve I /M
Updating
- Download the update tool NT Wonder and install it.
- Enable NT Wonder and connect NT301 to computer with USB cable.
- Click <Update online> or <Update offine-too start updating according to the software version conditions.
- An Update Finished Message displays when the update is completed.
Please download the User Manual for more detailed operations
amazonsupport@foxwelltech.com
Documents / Resources
 | NT301 OBDII or EOBD Code Reader |
References
- foxwelltech.uswww.foxwelltech.us
- User Manualmanual.tools
Published: March 19, 2023
hola yo tengo un lector de códigos foxwell nt 301..Este equipo me sirve para programar cuerpos de aceleración electronicos
Can the Foxwell NT301 be used to program electronic throttle bodies?
No, the Foxwell NT301 cannot be used to program or relearn electronic throttle bodies. According to the product manual and technical specifications, the NT301 is a basic OBDII/EOBD code reader designed for reading and clearing engine fault codes (DTCs), viewing live data, and performing emission readiness tests.
Programming or performing a "Throttle Body Relearn" typically requires a more advanced diagnostic scanner with bidirectional control or service functions, such as the Foxwell NT530 or NT680 series. The NT301 is limited to diagnostic functions and does not support advanced maintenance resets or component programming.
Read the full Q&A page