Foxconn GLOBE HMI-01 Globe Rocker Display
Product Specifications
| Model Name | Globe Rocker Display |
| Model No | GLOBE HMI-01 |
| Size | L 50mm x W 60mm x H 58mm |
| LCM Specification | Color LCD (240 x 320 Pixel) |
| Material | PC/ABS (35% Recycled Material)、PC |
| Screen Type | 2” TFT LCD w/LED back-light |
| Power | Operating Voltage 48Vdc Typical |
| Current | 20Ma |
| Operation Temperature | -20°C~70°C |
| Ingress Protection Rating | IPX6 |
| Protocol | CAN 2.0 |
| Physical Button | 4(Up/Down/Fun/Power) |
| Wireless Interface | BLE 5.1 |
| Charging Output | USB Type C: 5V / 1500mA |
| Functions | PAS level/Speed/ODO/Trip/Walk/Battery Status/Light Status/Error Status/Charging Status |
| Antenna | ANT162442ST-1000AM1 |
| Data Rate | Bluetooth® 5 – 2 Mbps, 1 Mbps |
| Antenna Type And Gain. | Chip Antenna And Gain 1.6dBi |
Product Overview
The Globe Rocker Display is a compact device designed for displaying information related to PAS level, speed, ODO, trip, walk, battery status, light status, error status, and charging status. It features a colour LCD screen with LED back-lighting and physical buttons for navigation.
Product Usage Instructions
- Power On/Off: Press and hold the Power button to turn the device on/off.
- Navigation: Use the Up and Down buttons to navigate through different options.
- Function Selection: Press the Fun button to select a function or option.
- Charging: Connect the USB Type-C cable to charge the device using a power source.
Warning
This device complies with FCC Rules and should not cause harmful interference. Any modifications not approved may void the user’s authority to operate the equipment. Keep the device away from the body during operation.
THIS DOCUMENT IS PROPERTY OF FOXCONN INTERCONNECT TECHNOLOGY CORPORATION. ITS USE IS AUTHORIZED ONLY FOR RESPONDING TO A REQUEST OR FOR QUOTATION, OR FOR THE PERFORMANCE OF WORK FOR FOXCONN INTERCONNECT TECHNOLOGY CORP. ALL QUESTIONS MUST BE REFERRED TO FOXCONN INTERCONNECT TECHNOLOGY CORP..
Copyright Notice
- Copyright © 2022 by Foxconn Interconnect Technology LTD
- All Rights Reserved. Printed in Taiwan.
- This publication is protected by copyright, and all rights are reserved. No part or whole of it may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, without the prior consent of Foxconn Interconnect Technology LTD.
- The information in this document has been carefully checked and is believed to be accurate. However, Foxconn
- Interconnect Technology LTD assumes no responsibility for any errors that may appear in this document. The material contained herein is for informational purposes only. The information contained in this document is subject to change without notice.
Purpose
- This document describes the product specification for Globe Rocker Display. This is based on the customers’ requirement
- specification. Foxconn Interconnect Technology Ltd. also uses this document to develop the system. Based on this specification, the 3ra party team can refer to it to understand the details of this product.
Outlook Diagram
Operation Guide
F CC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Federal Communications Commission (FCC) Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
- This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated, keeping the radiator at least 20cm or more away from the person’s body.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
FAQs
Q: What is the wireless interface used by the Globe Rocker Display?
A: The device uses Bluetooth 5.1 for wireless communication.
Q: What is the charging output specification of the Globe Rocker Display?
A: The charging output is USB Type C with a rating of 5V / 1500mA.
Documents / Resources
 |
Foxconn GLOBE HMI-01 Globe Rocker Display [pdf] User Guide GLOBE HMI-01, GLOBE HMI-01 Globe Rocker Display, GLOBE HMI-01, Globe Rocker Display, Rocker Display, Display |