
Quick Installation Guide
SMART LAN
Smart LAN Installation
Step 1:
Smart LAN consists of three parts. Insert the Internet cable into the nuts on the bottom, and then make the Rj45 Port for the wiring as below. Tighten the components.
Step 2:
Rotate the lock, and make sure the triangle logo is on the front and center. Plug the Smart LAN into the LAN port under the bottom (underside) of the inverter. Tighten the nut clockwise as follows.
APP Installation
Scan the QR Code below to download and install the FoxCloud APP on your smartphone or tablet.
![]() |
![]() |
![]() |
| https://appgallery1.huawei.com/#/app/C102376665 | https://play.google.com/store/apps/details?id=com.fox.foxapp | https://apps.apple.com/us/app/id1512581978 |
Register An Accountnt
For Installer
Via Smartphone
Step 1:
Please click ‘Register’, enter the installer’s information, and click ‘Next’ to complete the installer account registration. Note: If you already have an installer/agent account, please press ‘Login’ and enter your installer/agent account directly.
Step 2: Select ‘Installer’ and enter the Installer name, then click ‘OK’. We suggest that you fill in the relevant optional information to ensure after-sales service.
Note Installer: The installer. Agent: The agent/distributor/installation company.

Via Computer
Step 1: Open any browser and enter ‘foxesscloud.com’ on the address bar on top, and click ‘Sign up’.
Note: If you already have an installer/agent account, please press ‘Sign in’ and enter your installer/agent account directly.
Step 2: Click ‘Installer’ and enter information then click ‘Next’ to complete account registration. Note: ‘*’ is required to be filled in.

For End-User
Via Smartphone
Step 1:
Please click ‘Register’, enter the end user’s information, and click ‘Next’ to complete the end-user account registration.

Step 2: Select ‘End user’ then scan the LAN bar code on the Smart LAN, and click ‘OK’. We suggest that you fill in the relevant optional information to ensure after-sales service.

Via Computer
Step 1:
Please select ‘User’ then input all required information, and click ‘Next’ to complete account registration.

Create A Plant
For Installer
Via Smartphone
Step 1:
Open the APP, log in with your Installer/agent account.
Step 2:
Press the ‘+’ icon on the homepage to add a plant. Press the scan icon next to the ‘Device list’ to scan the QR code label on the side of the Smart LAN. Note: After starting the APP, it will pop up a message ‘Whether to allow positioning permissions’, please select ‘Allow’. For the capacity, please fill in the actual capacity of the installed solar panels.

Via Computer
Press the ‘New’ on the homepage to add plant. Complete all required information and click ‘Create’.

For End-User
Via Smartphone
Step 1:
Open the APP, and log in with your end-user account.
Step 2:
Press the ‘+’ icon on the homepage to add a plant. Press the scan icon next to the ‘Device list’ to scan the QR code label on the side of the Smart LAN. Note: After starting the APP, it will pop up a message ‘Whether to allow positioning permissions’, please select ‘Allow’. For the capacity, please fill in the actual capacity of the installed solar panels. 
Note: If SN has been bound to the plant already, APP will jump to the beside page. If SN has not been bound before, please refer to step 3.

Step 3: After scanning the code successfully, click ‘OK’ on the top right corner of the page, APP will pop up a message ‘Add device’, please click ‘OK’. Complete all required information and click ‘OK’ on the top right corner of the page.
Via Computer
Step 1:
Click ‘Associate SN’, input SN and click ‘Create’. Note: “*” is required to be filled in.
Note: If SN has been bound to the plant already, the website will jump to the following page. If the SN has not been bound before, please refer to step 2.
Step 2: It will pop up a ‘Tip’, please click ‘Confirm’. Complete all required information and click ‘Create’.

V1.0
10-203-00134-00
Documents / Resources
![]() | SMART LAN Device |
References
- User Manualmanual.tools




Hello, a company based in France has installed a Foxess inverter for us. I downloaded the FoxCloud app, but I can’t get it to work at all, my account is open, but when I scan the QRCode of the inverter and confirm nothing happens!! The device has been working since December 1st but I have no information on the application, as if my inverter was not recognized. Do you know a technician who could come and help us because I do not understand how to install the inverter on the application despite all my good will. We are in Haute-Savoir near Geneva but in France. Thank you for your feedback, Regards
Bonjour, une société basée en France nous à installé un onduleur Foxess . J’ai téléchargé l’application FoxCloud, mais je n’arrive pas du tout à la faire fonctionner, mon compte est bien ouvert, mais lorsque je scanne le QRCode de l’onduleur et confirmé rien ne se passe !! L’appareil fonctionne depuis le 1er décembre mais je n’ai aucun renseignement sur l’application , comme si mon onduleur n’était pas reconnu . Connaissez-vous une technicien qui pourrait venir nous aider car je ne comprends pas comment installer l’onduleur sur l’application malgré toute ma bonne volonté. Nous sommes en Haute-Savoir près de Genève mais sur France . Merci pour votre retour, Cordialement
Bonjour, une société basée en France nous à installé un onduleur Foxess . J'ai téléchargé l'application FoxCloud, mais je n'arrive pas du tout à la faire fonctionner, mon compte est bien ouvert, mais lorsque je scanne le QRCode de l'onduleur et confirmé rien ne se passe !! L'appareil fonctionne depuis le 1er décembre mais je n'ai aucun renseignement sur l'application , comme si mon onduleur n'était pas reconnu . Connaissez-vous une technicien qui pourrait venir nous aider car je ne comprends pas comment installer l'onduleur sur l'application malgré toute ma bonne volonté. Nous sommes en Haute-Savoir près de Genève mais sur France . Merci pour votre retour, Cordialement
How do I register my FOX-ESS inverter in the FoxCloud app if scanning the QR code does not work?
It sounds like you are experiencing a common issue where the app does not automatically proceed after scanning. Please try the following steps based on the FOX-ESS SMART LAN Installation Guide:
Regarding your request for a technician: Manuals+ is a documentation repository and does not provide on-site technical services. Since your system was installed by a professional company in France, we recommend contacting your original installer or reaching out to FoxESS official support at foxesscloud@fox-ess.com for localized assistance in Haute-Savoie.
Read the full Q&A page