Foshan PT100 Type Temperature Sensor User Manual

Foshan PT100 Type Temperature Sensor

PRODUCT OVERVIEW

DIMENSION

Specifications

• Product Name: Thermocouple Temperature Sensor
• Product Type: Instruments & Meters
• Model Types: K Type, PT100 Type, PT1000 Type, J Type, N Type, E Type, S Type, T Type, DS18B20, TL-136, Float Switch
• Batch Number: 191291

Manufacturer Information:

• Full Name: FoShan Da Fenqi Trade Co Ltd
• Country: China
• City: Foshan, Guangdong Province
• Detailed Address: Guangdong Province, Foshan Nanhai District, Shi Shan Town, Luocun Cuihu Oasis Garden 24
• Postal Code: 528000
• Phone Number: 86-18826496879
• Email: 654098637@qq.com

Compliance Information (European Union):

• Responsible Person: GET RICH
• Country: France
• Address: 8 bis rue Abel 75012 Paris, France Paris Ile-de-France
• Email: getrichsasu@outlook.com
• Phone Number: 33-745452622

Usage Instructions

Please read all instructions carefully before using the Thermocouple Temperature Sensor to ensure safe operation and prevent damage to the device.

This section will be expanded with specific instructions based on the chosen sensor type (e.g., K Type, PT100, DS18B20, etc.).

General steps typically include:

1. Unpacking: Carefully remove the sensor from its packaging.
2. Identification: Verify the model type of your sensor (e.g., K Type, PT100) to ensure compatibility with your measurement system.
3. Connection: Connect the sensor to your compatible measurement instrument or data logger. Ensure correct polarity and secure connections as per your instrument’s manual.
4. Mounting: Install the sensor in the desired measurement location. Ensure good thermal contact for accurate readings.
5. Calibration (if required): Refer to your instrument’s manual for any necessary calibration procedures.
6. Operation: Power on your measurement instrument and begin taking temperature readings.
7. Maintenance: Keep the sensor clean and free from debris. Avoid exposing it to extreme physical stress or corrosive environments unless specifically designed for such conditions.

Troubleshooting

This section provides general troubleshooting tips. For specific issues, refer to the documentation of your measurement instrument.

• No Reading/Incorrect Reading:
  • Check all connections to ensure they are secure and correctly wired.
  • Verify that the sensor type selected on your instrument matches the connected sensor (e.g., K Type selected for a K Type sensor).
  • Ensure the sensor is properly installed and making good thermal contact with the object or environment being measured.
  • Check for any visible damage to the sensor or its cable.
• Fluctuating Readings:
  • Ensure the sensor is stable and not subject to external vibrations or rapid environmental changes.
  • Check for electromagnetic interference (EMI) if the sensor cable is running near power lines or other electrical equipment.
  • Verify the integrity of the sensor cable for any breaks or shorts.
• Sensor Not Recognized by Instrument:
  • Confirm the instrument is compatible with the specific sensor type.
  • Check the power supply to the instrument and sensor (if applicable).
  • For digital sensors (like DS18B20), ensure proper communication protocols are configured.

Safety & Warnings

Read all instructions before use to ensure safety and prevent damage.

Warning: Children, keep the device and its cord out of reach of children under 3 years old.

• Do not expose the sensor to temperatures outside its specified operating range.
• Avoid physical damage to the sensor probe and cable.
• Ensure proper electrical connections to prevent short circuits or electrical hazards.
• Do not use the sensor in environments for which it is not designed (e.g., highly corrosive liquids unless specified).
• If the sensor or cable appears damaged, do not use it.