FOSCAM V8P QHD WiFi IP Camera

Overview

Key Features

• 8MP UHD Waterproof IP Camera
• H.264+/H.264 video Compression
• Supports Human detection, Motion Detection and Vehicle Detection
• Compatible with free Foscam Video Management Software
• Compatible with free Foscam iOS and Android APP
• Support 2.4GHz&5GHz dual-band WiFi
• Supports Full Duplex two-way Audio
• Supports HDR
• Supports 256GB Micro SD Card storage(External)
• Night Vision Range up to 20m(66 feet)
• P2P Feature for Easy Remote Access
• Supports image snapshot
• Supports dual-stream
• Supports remote viewing & record from anywhere anytime
• Multi-level users management with password protection
• Supports multiple network protocols: IP, TCP, UDP, SMTP, FTP, DHCP, RTSP
• Supports Alexa
• Supports Google home

Read before Use

Please first verify that all contents received are complete according to the Package Contents listed below. Before the Network Camera is installed, please carefully read and follow the instructions in the Quick Setup Guide to avoid damage due to faulty assembly and installation. This also ensures the product is used properly as intended.

Packing Contents

• Camera× 1
• Quick Setup Guide × 1
• Waterproof Lid × 1
• Power Adapter ×
• Ethernet Cable× 1
• Expansion Screws× 1
• Mounting Template× 1
• Wifi Antenna× 1

Physical Description

Microphone: Built-in Microphone. Lens: Fixed focus lens. Spotlight：See full-color images at night with the spotlight on.
LED Indicator: Infrared LED for night vision.
Reset: Press and hold on the reset button for 3~5 seconds. Releasing the reset button, the password will back to the factory default administrator password.
Micro SD Card slot: Supports up to 256GB SD card for storing the video.
Speaker: Built-in speaker
Power: AC wiring interface.
LAN:10/100M adaptive Ethernet interface. Through this interface, IP camera can be connected with various network devices, such as hub, router, etc.

SD Card Management

This camera supports Micro SD Card.
When you plug in the SD card during the camera work process, please reboot the camera again, or else the SD card might not work well.
On Foscam app go to the Settings →Device Status →Device Status page, you can see the SDcard status.

Add Device: Connection via the Foscam App

Scan the QR code below to download and install the Foscam APP.

Please refer to the Quick Setup Guide.

Installation

Please refer to the Quick Setup Guide.
Point the camera at the desired location and use the screws provided to mount it.

Please Note:
Ensure that rain or water will not reach the connector ports at the end of the pigtail wiring. These Connectors Are not weather-resistant.

Waterproof Lid Installation Guide

When mounting your camera outdoors, you are suggested to install the waterproof lid for it. You may follow the steps for installation.

1. Thread the Ethernet cable through the top cover and then the waterproof connector.
   
2. Put the rubber seal ring around the Ethernet cable between the top cover and the waterproof connector.
   
   Note: The rubber seal ring provided has been cut. If not, you may manually cut it.
3. Put on the rubber O-ring to the Ethernet port of the camera and plug the Ethernet cable into the Ethernet port.
   
4. Align the waterproof connector with the Ethernet port, then twist it clockwise to tighten the two-part.
   
5. Push the rubber seal ring into the waterproof connector, then screw the top cover and lock it into position firmly to finish installation.
   

Default Parameters

Default network parameters

IP address: obtain dynamically
Subnet mask: obtain dynamically
Gateway: obtain dynamically

Specification

ITEMS		V8P
Spotlight	Colour Temperature	4500K
Image Sensor	Sensor Type	High-Definition Colour CMOS Sensor
	Display Resolution	8.0Megapixels (3840*2160)
	Min. Illumination	0 Lux (With IR Illuminator)
Lens	Lens Type	f:4mm; F1.6
	Angle of view	Diagonal: 108.5°, Horizontal: 90.1°, Vertical: 46.2°
Video	Image Compression	H.264+/H.264
	Resolution	4K(3840*2160)2M/25fps, 1080P(1920*1080)1M/25fps, 720P(1280*720)1M/15fps
	Stream	Dual stream
	Image Adjustment	The hue, brightness, contrast, saturation, sharpness are adjustable
	Flip Image	Flip and mirror
	Night Mode	Manual and automatic modes, when the white light is on, the night vision image is coloured
	Night Visibility	With 4pcs IR-LED and spotlight, Night Vision Range up to 20m
Audio	Input/Output	Built-in mic and speaker, supports full duplex 2-way Audio
	Audio Compression	PCM/AAC
	Siren	Support maximum 100dB alarm siren
Network	Ethernet	One 10/100Mbps RJ45 por
	Wireless Standard	IEEE802.11b/g/n/a
	Wireless Security	WPA, WPA2
	Remote Access	P2P
	Wireless Setup	Supports Bluetooth connection + QR Code
	Network Protocol	IP, TCP, UDP, SMTP, FTP, RTSP
System Requirement	Operating System	Microsoft Windows (Foscam VMS), MacOS (Foscam VMS), Android (Foscam app), iOS (Foscam app)
Other Features	Light Control	Manual switch or alarm linkage
	Motion Detection	Alarm via E-Mail, FTP and Foscam app when an event is detected
	Vehicle Detection	Alarm via E-Mail, FTP and Foscam app when an event is detected
	Human Detection	Alarm via E-Mail, FTP and Foscam app when an event is detected
	User Accounts	Three levels user role
	Privacy Block	Yes
	HDR	Improve image clarity in complex scenario
	Zoom	6X digital zoom function
	Storage	Support max. 256GB Micro SD card, local and FTP storage, Foscam cloud storage
	Intelligent Assistant	Works with Alexa, Google Home
Power	Power Supply	DC12V/1A
	Power Consumption	5 Watts (Max.)
Physical	Dimension(LxWxH)	170(L)x66 (W)x66 (H)
	Net Weight	346g
Environment	Waterproof	IP66
	Operating Temperature	20°C~40°C (-4°F ~ 104°F)
	Operating Humidity	20% ~ 85% non-condensing
	Storage Temperature	-20°C ~ 60°C (-4°F ~ 140°F)
	Storage Humidity	0% ~ 90% non-condensing
Certification	CE, FCC, RoHS, WEEE

For other parts, please refer to the “FOSCAM Camera User Manual”

Documents / Resources

FOSCAM V8P QHD WiFi IP Camera [pdf] User Manual V8P QHD WiFi IP Camera, V8P, QHD WiFi IP Camera, WiFi IP Camera, IP Camera

References

• User Manual