SD8P Wireless IP Camera
Quick Setup Guide
Wireless IP Camera
Setting Up Your Foscam Security Camera
1 Getting Started
Package Contents
IP Camera
Waterproof Lid
Wi-Fi Antenna
Network Cable
Mounting Bracket MountingTemplate
Quick Setup Guide
Wireless IP Camera
Power Adapter
Expansion Screws Quick Setup Guide
To view this guide in other languages (e.g. Nederlands, Deutsch, Français, Español), and for detailed manuals, tools, etc., please visit foscam.com/downloads.
V2.0 305503001072
Safety Tips
Please change the camera’s password regularly, using a combination of numbers, letters and special characters. We recommend that you regularly update your camera with the latest available software and firmware to ensure the best experience with your camera. Please ensure that the proper power supply is used before using the camera. Do not use the device where wireless devices are not allowed. Do not disassemble, repair or modify the product. Do not use the product if the casing has been broken. Danger of electric shock. Please install the camera securely using the screws provided. Change your default port to a greater range to help ensure the safety of your connection. To avoid the risk of fire or electric shock, please keep your camera connectors in a cool, dry place. Please keep the camera out of reach of small children. Operating Temperature: -20 ~50(-4~122).
2 Physical Description
Antenna
Microphone
Infrared LED
Lens Spotlight
Light Sensor
Micro SD Card Slot Speaker LAN PowerReset
3 Setting Up Your Camera:
Connection via the Foscam App (Recommended)
Before You Get Started
Scan the QR code below to download and install the Foscam APP.
2. Plug the power adapter into the camera, and please wait for a few seconds until hearing the “Ready for WiFi configuration”
To ensure a smoother video experience on your smart phone, it is recommended that your smart phone meet the following specifications:
iOS: version 11 or higher.
Android: 5.0 or higher, using a device with a Graphics Processing Unit (GPU). Note: For the best experience, please update the APP to the latest version!
WiFi Connection
1. Please tighten the antenna clockwise and make sure it is in a vertical position.
Tips: If you didn’t hear the voice prompt, press and hold reset for about 3~5 seconds to reset the camera.
3. Make sure that your smartphone is connected to your WiFi router and turn on the system Bluetooth.
WiFi
WLAN
MY NETWORKS
xxxxx_2.4G xxxxx_5G
Settings WLAN
2.4 GHz 5 GHz
Bluetooth
UID:XXXXXXXXXXX
4. Open the Foscam APP and please register a Foscam account, or sign in if you have one already.
Email address Password
Forgot Password Accept Privacy Notices and Terms of Seervice
Sign In Sign Up
4
Scan QR Code
Please scan the QR code on the device or share the QR to bind the device
Model: XXX Wireless IP Camera
FCC ID:XXXXX IC:12558A-XX
S/N:FIAI1403000001
UID:XXXXXXXXXXX
Album
Flash
Scan QR Code
tdPheleevaidcseeevoiscrcesahnatrheethQeRQcRodteo
on the bind
FM IFCHC:1CDo2IW d5D5:ieX8reXAll:X-eXXXsXsXXIPXCamera
S/N:FIAI1403000001
UID:XXXXXXXXXXX
Album
Flash
S/N:FIAI1403000001
FMHDodWirele:lesXs IXPXCamera IFCC:1C I25D:5X8XA-XXXXX
5. Follow the steps below:
1
My Device
2
Add Device
Add Cameras
Tap to add a device
Add NVR/NVR kits
3
Add Device
< Scan the QR code
Search in LAN
Manually add
5
Add Device
Power the device on until the device voice prompts “Hello foscam”
6
Wi-Fi configuration
Keep the device and mobile phone close tothe router.
7
Searching for Bluetooth
Searching for nearby Bluetoot devices…
I have heard”Hello Foscam”
Next
XXXXX_5G WiFi Password
Confirm
The cords on this product are a potential strangulation hazard. For child safety, please keep these cords out of the reach of children.
Tighten clockwise
Note: Before connecting the camera via Bluetooth, ensure that the system’s Bluetooth is turned on.
8
Add Camera
<
Device Landing.. 20% Please do not exit this app or turn off the device during this process(requires approximately 2 minutes to complete)
11
Camera Login
New camera username New camera password Re-enter new camera password
Submit
9
Set name
10
My Device
Device added successfully Please set the device name:
Garden Living Room Doorway Corridor Garage Balcony Bed Room Kitchen Garden
Save the body QR code
Save the device`s QR code to the mobile system album to help you re-add the device more conveniently
Save
Foscam_camera
12
Garden
Foscam_camera
Note: If the adding process fails, please reset your camera and try adding again according to the above method.
Reset
4 PC Access Your Camera
Foscam VMS
Foscam VMS is a new tool for PCs. It does not require plug-ins and is compatible with Windows & Mac, supporting all Foscam HD cameras and up to 36 cameras at the same time. If you would like to manage multiple cameras, we suggest you install Foscam VMS. You can download the “Foscam VMS ” Windows version from foscam.com/vms, and can download the “Foscam VMS” Mac version from the APP store: https://apps.apple.com/cn/app/foscamvms/id1521202507?mt=12
Note: For the best experience, please update Foscam VMS to the latest version! Add the IP Camera 1. Run Foscam VMS, then create a local administrator account or
a Foscam account and login. 2. Tap the “+” icon on the Foscam VMS and follow the setup
wizard to add your camera. Please visit foscam.com/downloads to view the user manual and for additional detailed steps.
5 Hardware Installation
A B
1. Screw the mount on the wall with the two screws provided. 2. To attach the camera base A to the mounting bracket B, insert
the base into the bracket as pictured. 3. Screw the camera to the wall with the two screws provided.
6 Important Notice
Camera Username & Password The camera username & password are used to access and manage your camera. Having a strong password can significantly improve the security of your camera. If you have forgotten either of them, please press the “Reset” button.
Press and hold the “Reset” button for 3-5 seconds until hearing “reset succeed”.
Reset
Storage Media Your camera supports cloud, NVR (Network Video Recorder), and Micro SD card (supports FAT32 and exFAT format) storage formats.
cloud Storage
NVR
Micro SD card
(FAT32 & exFAT)
7 Product Performance
WLAN frequency range: 2412MHz – 2472MHz and 5725MHz – 5850MHz
Bluetooth Frequency Range: 2400-2483.5MHz Maximum transmission power: < 18dBm Wireless Standard: IEEE802.11b/g/n (2.4GHz)
IEEE802.11a/n/ac (5GHz) Power Supply: DC 12V 2.0A 24W
8 Troubleshooting
IP cameras is not powering on If you find your camera is not powering on, please the following: 1. Please check whether the outlet is working properly or not.
Try to plug the camera into a different outlet and see whether it will work. 2. Please check whether the DC adapter is working or not. If you have another 12V/2A power adapter which is working, please try with another power adapter and see whether it will work. 3. If it still won’t work, please contact Foscam support.
How to re-configure the WiFi connection for Foscam cameras after router changed? 1. Please connect the camera to your router with an ethernet cable. If you can see the camera live video on the Foscam app, please go to camera settings–>WiFi settings to choose the new WiFi name and input WiFi password to set up. After the WiFi settings is completed, please disconnect the ethernet cable from the camera and wait for some seconds to connect to the camera.
2. There is a need to reset the camera first. Please refer to https://www.foscam.com/faqs/view.html?id=13 to see the reset steps. Then please open the Foscam app to scan the QR-code of your camera to set up the wireless connection for the camera. Please make sure your cellphone is connected to that new WiFi.
Warning To assure continued compliance, any changes or modifications not expressly approved by the party.Responsible for compliance could void the user’s authority to operate this equipment.
FCC Statement This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement: The equipment complies with FCC Radiation exposure limits set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
FAQS
Foscam APP
CE Certificate statement Website: https://www.foscam.com/company/ce-certificate.html
Exporter and Importer Information Opened to Public: https://www.foscam.com/company/open-information.html
Manufacturer: Shenzhen Foscam Intelligent Technology Co., Ltd Addr: Room 902, Building 1B, Shenzhen International Innovation Valley, Xingke 1st Street, Nanshan District, Shenzhen, Guangdong, China, 518055 Support email: support@foscam.com
EC REP
Company: TECHTRIBE GmbH Address: Romy-Schneider-Strasse 4a, D-40549 Duesseldorf E-mail: ec.rep@tech-tribe.de
UK REP
Company: Sea&Mew Accounting Ltd Address: Electric Avenue Vision 25, London, Enfield EN3 7GD E-mail: info@seamew.net
www.foscam.com
Due to product upgrades and other reasons, this guide may be slow to update, resulting in slight inconsistencies with the official website information. Please take the official website (www.foscam.com) information as the current standard.
Documents / Resources
 |
FOSCAM SD8P Wireless IP Camera [pdf] User Guide SD8P, SD8P Wireless IP Camera, Wireless IP Camera, IP Camera, Camera |
 |
FOSCAM SD8P Wireless IP Camera [pdf] User Guide SD8P Wireless IP Camera, SD8P, Wireless IP Camera, IP Camera, Camera |
