FORTIN EVO-ONE Compatible Module Installation Guide

FORTIN EVO-ONE Compatible Module

Specifications

• Model: EVO-ONE
• Compatibility: HONDA/ACURA vehicles manufactured after 2019
• Push-to-Start Gas System
• Firmware Version: 73.[41]
• Programmable options for bypass and remote control
• Required tools: FLASH LINK UPDATER or FLASH LINK MOBILE (sold separately)

REGULAR INSTALLATION

COMPATIBLE MODULE REQUIRED

MODULE COMPATIBLE REQUISQR CODE ON THE LABEL MANUFACTURED AFTER: 2019

FIRMWARE VERSION VERSION LOGICIELLETo add the firmware version and the options, use the FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.
Pour ajouter la version logicielle et les options, utilisez l’outil FLASH LINK UPDATER FLASH LINK MOBILE,

NOTES

The module will shut down the vehicle as soon as the driver’s door is opened.

THIS MODULE MUST BE INSTALLED BY A HIGHLY QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

MANDATORY INSTALL | INSTALLATION OBLIGATOIRE

HOOD PIN

THE HOOD PIN SWITCH (INCLUDED) A11 MUST BE INSTALLED IF THE VEHICLE CAN BE

Notice: the installation of safety elements is mandatory. The hood pin and the stickers are essential securityelements and must be installed.

THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.

This guide may change without notice. See www.fortin.ca for the latest version.

DESCRIPTION

Program remote starter option for System Control by OEM RemoteEnable: Press Lock, Lock, Lock to remote start with the OEM remote.

NOTES

IF THE BCM OR THE BATTERY HAS BEEN DISCONNECTED, SEVERAL ERROR MESSAGES WILL BE DISPLAYED UNTIL THE VEHICLE IS DRIVEN.

WIRING CONNECTIONThis guide may change without notice. See www.fortin.ca for the latest version.KEY BYPASS PROGRAMMING PROCEDURE 2/2

REMOTE STARTER PROGRAMMING PROCEDURE

REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.REMOTE STARTER FUNCTIONALITY

All doors must be closed.

Remote start the vehicle.

The module will shut down the vehicle as soon as the driver’s door is opened.Notice: Updated Firmware and Installation Guides. Updated fi rmware and installation guides are posted on our website on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this productWARNING 
The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work, and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by a qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

Installation

This module must be installed by a highly qualified technician to avoid permanent damage to the vehicle.

Mandatory Install: The hood pin switch must be installed if the vehicle can be remote started with the hood open.

Security Note: Incorrect connections can causepermanent damage to the vehicle.

Program Bypass Option

Program the desired bypass option using the provided UNIT OPTION codes.

Wiring Connections

Connect the module to the vehicle’s BCM using the specified wiring connections. Make sure to follow the guide for proper installation.

Fuse and Wiring Details

Refer to the provided wiring guide for fuse locations and wiring connections. Ensure proper connection for correct functionality.

FAQs