formlabs Form Wash L 3D Printer
INSTALLATION INSTRUCTIONS
- Remove the outer box.
- Cut the tape, remove the top foam, and unpack accessories.
- Use the cardboard slings to lift the machine off of the base
- Carry machine near final position.
- Slide the cardboard slings out from under the machine
- Connect wifi antenna.
- Connect the power cable to the machine and an outlet
- Power on the machine.
- Refer to the screen for further instructions.
Documents / Resources
 |
formlabs Form Wash L 3D Printer [pdf] User Guide 106572-01, Form Wash L 3D Printer, Form Wash L, 3D Printer |
