FLPMBE01 Precision Model Resin
“
Product Information
Specifications
- Material: Precision Model Resin
- Application: Restorative models
- Accuracy: >99% of printed surface area
within 100 µm of the digital model - Color: Beige
- Finish: Smooth, matte
Material Properties
| Green | Post-Cured | |
|---|---|---|
| Ultimate Tensile Strength | 44 MPa | 50 MPa |
| Tensile Modulus | 2.0 GPa | 2.2 GPa |
Product Usage Instructions
Preparing the Model Resin
Ensure the printer is calibrated and the resin tank is clean
before use.
Printing the Model
- Load the Precision Model Resin cartridge into the printer.
- Prepare your digital model and set printing parameters for high
accuracy. - Initiate the printing process and monitor for any issues.
Post-Processing
After printing, wash the model in a Form Wash with Isopropyl
Alcohol and air dry before post-curing.
Post-Curing
Follow the recommended post-curing settings to achieve optimal
material properties.
Frequently Asked Questions (FAQ)
Q: How should I store unused Precision Model Resin?
A: Store the resin in a cool, dark place away from direct
sunlight and heat sources to maintain its quality.
Q: Can Precision Model Resin be used for temporary
restorations?
A: No, Precision Model Resin is not suitable for temporary
restorations as it is designed for creating accurate models.
Q: What cleaning solvents are compatible with Precision Model
Resin?
A: Compatible solvents include Acetone, Isopropyl Alcohol, and
others as listed in the user manual.
“`
DENTAL RESIN
Precision Model Resin
Formlabs’ most accurate material for printing high quality restorative models
Precision Model Resin is a high-accuracy material for creating restorative models with >99% of printed surface area within 100 m of the digital model. Create beautiful models with crisp margin lines thanks to high opacity, beige color, and a smooth, matte finish to capture fine details.
Precision Model Resin is a new material that leverages the Form 4 ecosystem to print three times as fast as previous formulations of Model Resin.
Restorative models Crown fit test models
Implant models Removable die models
V1 FLPMBE01
Prepared 20/03/2024 Rev. 01 20/03/2024 1
To the best of our knowledge the information contained herein is accurate. However, Formlabs, Inc. makes no warranty, expressed or implied, regarding the accuracy of these results to be obtained from the use thereof.
Material Properties
Tensile Properties Ultimate Tensile Strength Tensile Modulus Elongation at Break Flexural Properties Flexural Strength Flexural Modulus Impact Properties Notched Izod Unnotched Izod Thermal Properties Heat Deflection Temp. @ 1.8 MPa Heat Deflection Temp. @ 0.45 MPa Thermal Expansion
METRIC 1
Green 2
Post-Cured 3
METRIC 1
44 MPa
50 MPa
2.0 GPa
2.2 GPa
11%
8.60%
METRIC 1
68 MPa
87 MPa
1.7 GPa
2.3 GPa
METRIC 1
28 J/m
32 J/m
440 J/m
262 J/m
METRIC 1
45.1 °C
46.3 °C
IMPERIAL 1
Green 2
Post-Cured 3
IMPERIAL 1
6390 psi
7190 psi
293 ksi
326 ksi
11 %
8.60%
IMPERIAL 1
9863 psi
12618 psi
247 ksi
334 ksi
IMPERIAL 1
0.52 ft-lb/in
0.59 ft-lb/in
8.3 ft-lb/in
4.9 ft-lb/in
IMPERIAL 1
113.2 °F
115.3 °F
51.7 °C
53.5 °C
125.1 °F
128.3 °F
80.2 m/m/°C 81.1 m/m/°C 44.6 in/in/°F 45.1 in/in/°F
METHOD
METHOD ASTM D638-14 ASTM D638-14 ASTM D638-14
METHOD ASTM D790-15 ASTM D790-15
METHOD ASTM D256-10 ASTM D4812-11
METHOD ASTM D648-16
ASTM D648-16 ASTM E813-13
SOLVENT COMPATIBILITY Percent weight gain over 24 hours for a printed 1 x 1 x 1 cm cube immersed in respective solvent:
Solvent Acetic Acid 5% Acetone Bleach ~5% NaOCl Butyl Acetate Diesel Fuel Diethyl glycol Monomethyl Ether
Hydraulic Oil
Hydrogen peroxide (3%) Isooctane (aka gasoline) Isopropyl Alcohol
24 hr weight gain, % 1.0 10.3 0.8 0.6 0.2 2.1
0.2
1.01 -0.03 0.6
Solvent
Mineral oil (Heavy) Mineral oil (Light) Salt Water (3.5% NaCl) Skydrol 5 Sodium Hydroxide solution (0.025% PH 10) Strong Acid (HCl conc) Tripropylene glycol monomethyl ether Water Xylene
24 hr weight gain, % 0.2 0.3 0.9 0.3 0.9 0.5
0.3
0.9 < 0.1
1 Material properties may vary based on part geometry, print orientation, print settings, temperature, and disinfection or sterilization methods used.
2 Data was obtained from green parts printed on a Form 4 printer with 50 m Precision Model Resin settings, washed in a Form Wash for 5 minutes in 99% Isopropyl Alcohol, and air dried without post cure.
3 Data for post-cured samples were measured on Type I tensile bars printed on a Form 4 printer with 50 m Precision Model settings, washed in a Form Wash for 5 minutes in 99% Isopropyl Alcohol, and post-cured at 35°C for 5 minutes in a Form Cure.
2
Documents / Resources
 |
formlabs FLPMBE01 Precision Model Resin [pdf] Owner's Manual FLPMBE01 Precision Model Resin, FLPMBE01, Precision Model Resin, Model Resin |
