formlabs Denture Base Resin Long Lasting Denture Base Material
Important Information
Long-lasting denture base material for truly lifelike permanent prosthetics
Denture Base Resin is a Class II long-term biocompatible material to enable dental professionals to produce 3D printed denture bases accurately and reliably. Denture Base Resin can be bonded to Premium Teeth Resin to create full or partial dentures with lifelike aesthetics.
Other Model
Specification
| V1 | FLDBLP01 | FLDBOP01 | FLDBDP01 | * May not be available in all regions |
| Prepared | 16/09/2020 | To the best of our knowledge the information contained herein is accurate. However, Form labs, Inc. makes no warranty, expressed or implied, regarding the accuracy of these results to be obtained from the use thereof. | ||
| Rev. 01 | 16/09/2020 | |||
| Material Properties | METRIC 1 | METHOD |
| Post-Cured 2 | ||
| Mechanical Properties | METRIC 1 | METHOD |
| Flexural Strength | > 50 MPa | ISO 10477 |
| Density | 1.15 g/cm3 < X | ASTM D792-00 |
Denture Base resin wwas tested for biological evaluation of medical devices at WuXi Apptec, 2540 Executive Drive, St. Paul, MN, and is certified biocompatible per EN-ISO 10993-1:2009/ AC:2010:
| ISO Standard | Description |
| EN-ISO 10993-3:2014 | Not mutagenic |
| EN-ISO 10993-5:2009 | Not cytotoxic |
| EN-ISO 10993-10:2010 | Not an irritant |
| EN-ISO 10993-10:2010 | Not a sensitizer |
| EN-ISO 10993-11:2006 | Non toxic |
The product was developed and is in compliance with the following ISO Standards:
| Denture Base ISO Standards | Description |
| EN-ISO 22112:2017 | Dentistry – Artificial teeth for dental prostheses |
| EN-ISO 10477 | Dentistry – Polymer-based crown and veneering materials (Type 2 and Class 2) |
- Material properties can vary with part geometry, print orientation, print settings, and temperature.
- Data refers to post-cured properties obtained after exposing green parts to 108 watts each of Blue UV-A (315 – 400 nm), in a heated environment at 80 °C (140 °F) and 1hr, with six (6) 18W/78 lamps (Dulux blue UV-A)
Documents / Resources
 |
formlabs Denture Base Resin Long Lasting Denture Base Material [pdf] User Guide V1 FLDBLP01, FLDBOP01, FLDBDP01, Denture Base Resin Long Lasting Denture Base Material, Denture Base Resin, Long Lasting Denture Base Material, Denture Base Material, Base Material, Material |
