FORMD-LOGO

FORMD T1 Reference V2.0 Want Some More Photos

FORMD-T1-Reference-V2-0-Want-Some-More-Photos-PRODUCT

Product Specifications

  • Model: T1 REF V2.0
  • Manufacturer: FormDT1.com
  • Fasteners Included: M3 Thumbscrew, M3 Flat Head Screw, M3 Countersunk Screw, M3 Standoff, M3 Female Standoff, CSM3-5, CSM3-8

Product Usage Instructions

Assembly

  1. Lay out all the components included in the package on a clean, flat surface.
  2. Identify the various panels and fasteners according to the manual.
  3. Assemble the side panels, top/bottom panels, rear panel, and front panel according to the provided instructions.
  4. Use the appropriate fasteners for each component and ensure  not to overtighten the screws.

Installation of Components

  1. Install the SFX PSU Bracket using the provided screws.
  2. Attach the Case Feet to the bottom panel of the case.
  3. Secure the C13-C14 Inlet Cable to the side panels.
  4. Install the Fan Bracket and Lock Bar as per the manual.

Power Button and Fan Installation

  1. Mount the Power Button on the front panel of the case.
  2.  Attach the Fan Bracket to the designated area inside the case.
  3. Ensure all components are securely fastened but not over tightened.

Frequently Asked Questions (FAQ)
Q: What should I do if I encounter resistance while tightening the screws?
A: Do not tighten more than one-quarter turn once resistance is encountered. Each fastener is different, so be cautious not to over tighten.

Reference V2.0

Assembly Manual

T1 REF V2.0

FORMD T1 Reference-0V2.-Want-Some More-Photo-  (2)

T1 REF V2.0
CAUTION: do NOT overtighten the screws. Once resistance is encountered, do not tighten more than one-quarter turn. Each fastener is different in length or head shape, and putting them to each other is an excellent way to identify them.
* The screw pack is intented for standard T1 (Sandwich).

FormDT1.com

TOOLS

FORMD T1 Reference-0V2.-Want-Some More-Photo-  (3)

Fasteners
M3-4 x6 STANDOFF-F6 x4 FORMD T1 Reference-0V2.-Want-Some More-Photo-  (4)

Fasteners: M3-4 x4 FORMD T1 Reference-0V2.-Want-Some More-Photo-  (5)

Fasteners: CSM3-5 x2 FORMD T1 Reference-0V2.-Want-Some More-Photo-  (6)

Fasteners:
M3-4 x4
#6-32 x4
* #6-32 used for the power supply installation is not included FORMD T1 Reference-0V2.-Want-Some More-Photo-  (7)

Fasteners: CSM3-8 x2 FORMD T1 Reference-0V2.-Want-Some More-Photo-  (8)

Fasteners: M3-4 x2 FORMD T1 Reference-0V2.-Want-Some More-Photo-  (9)

Fasteners:

  • M3-4 x1
  • CSM3-5 x3
  • CSM3-8 x3 FORMD T1 Reference-0V2.-Want-Some More-Photo-  (10)

Fasteners: CSM3-5 x4

FORMD T1 Reference-0V2.-Want-Some More-Photo-  (11)FORMD T1 Reference-0V2.-Want-Some More-Photo-  (12)

Fasteners: THUMB-6 x4

FORMD T1 Reference-0V2.-Want-Some More-Photo-  (1)

Brought to you by the FORMD Team.

Documents / Resources

FORMD T1 Reference V2.0 Want Some More Photos [pdf] Instruction Manual
T1 Reference V2.0 Want Some More Photos, T1 Reference, V2.0 Want Some More Photos, Some More Photos, More Photos, Photos

References

Leave a comment

Your email address will not be published. Required fields are marked *