FOKOOS FA10 Smart Plug User Manual

FOKOOS LOGO

FOKOOS FA10 Smart Plug

FOKOOS FA10 Smart Plug

Parameters

  • Product Name: Smart Plug
  • Model/HVIN: FAIO
  • Rated oltage. 120V AC 50/60HZ
  • Rated Current: 10A Max.
  • Max. Power: 1200W
  • Wi-Fi Frequency: 2.4 GHZ
  • Support System: Android & iOs
  • FCC ID: 2ARER-FAIO
  • IC: 25047-FAI0FOKOOS FA10 Smart Plug 1

Start Your Tech Home

  • Scan the QR code to download the Tech Home” App, you can also search “Tech Home oand download the App from the App Store or Google Play. App Store Google PlayFOKOOS FA10 Smart Plug 2
  • Follow the instructions in the “Tech Home” App to complete the setup. If there is any problem during connection, please contact support.us@fokoos.com for help.

Notices

  •  Please carefully check for any damage Caused during the transport. In case of ainy damage, please contact your supplier for a replacement.
  •  Please follow the instructions above carefully to keep your new product|s] in a safe and good condition.
  •  Be careful to keep the plug out of the reach of children, it is not a toy.
  •  Ensure that the smart plug is fully plugged in before and during the use.
  •  The total power of connected devices must not exceed the stated maximum power of the plug.
  •  To avoid the risk of harm, do not attempt to disassemble the plug. Do not use the item if it is damaged.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there IS no guarantee that interference will not OcCur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/ TV technician for help.

To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment. For example use only shielded interface cables when connecting to computer or peripheral devices. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure statement

The equipment complies with FCC radiation exposure limits set forth for uncontrolled environments. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.

IC Warning

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

  • This device may not cause interference.
  • This device must accept any interference, including interference that may cause undesired operation of the device.

Canadian radiation exposure

This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance. This equipment complies with Canadian radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.

Warranty

This product carries a 24-month warranty from the purchase date. We will be happy to assist you in case of any problem with our products. Feel free to contact the FOKOOS customer service at the below email address

Documents / Resources

PDF thumbnailFA10 Smart Plug
User Manual · FA10, 2ARER-FA10, 2ARERFA10, FA10 Smart Plug, FA10 Smart Plug

References

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Browse all questions about this manual

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. what is default
    WiFi password

    🇺🇦 Anonymous asks what is default
    WiFi password
    Manuals+ clarified question
    Question

    What is the default WiFi password for the FOKOOS FA10 Smart Plug?

    Answer

    The FOKOOS FA10 Smart Plug does not have a default WiFi password. Instead, it connects to your existing home WiFi network during the setup process.

    To set up the device:

    • Download the Smart Life or Tuya Smart app from the App Store or Google Play.
    • Ensure your smartphone is connected to a 2.4GHz WiFi network (5GHz networks are not supported).
    • Plug in the device and follow the in-app instructions to pair it. You will be prompted to enter your own home WiFi password so the plug can join your network.

    If you are referring to the password for the plug's own hotspot during "AP Mode" pairing, it typically does not require a password, or the app will provide a temporary one if necessary.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.