FOCAL IS MBZ 100 2-Way Component Speaker
IMPORTANT SAFETY INSTRUCTIONS
& | The exclamation mark represented in an equilateral triangle is intended to alert users to the existence of important instructions in the user manual relating to the use and maintenance of the device. | |
1. Read these instructions. 2.Keep these instructions. Heed all the warnings. 4.Follow all the instructions. To avoid damaging |
If a subwoofer is installed in your vehicle, it is important to secure it firmly. We recommend that you attach the enclosure to the floor or chassis of the vehicle | If cables or harnesses are provided, use them the proper way (like mentioned in this user manual) without replacing or modifying them. If a fuse is included |
your hearing, do not listen to loudspeakers at high volumes for long periods of | for safety. If the subwoofer is not properly secured. it could become a projectile | in the kit or harness, use only same rating one in case of replacement. |
time. Listening to loudspeakers at high | in the event of an accident. This point is even more important if the subwoofer is installed in a hatchback, a station wagon, a utility vehicle or a van. | |
volumes can cause damage to the user’s ears and may lead to hearing problems (temporary or permanent deafness, buzzing in the ears, tinnitus, | ||
hyperacusis). | ||
Exposure to excessive volumes (over 85 dB) for | ||
more than one hour can cause | ||
irreparable damage to your hearing. | ||
•>) | ||
(CEI 60417-6044) |
Accessories
Use cases of woofer protection
Specifications
IS MBZ 100 | IC MBZ100 | |
Type | 2-way component kit | 2-way coaxial kit |
Maximum power | 100W | sow |
Nominal power | SOW RMS | 40W RMS |
SensltiVity (2,83V/1m) | 87dB | 88dB |
Frequency response | 150Hz-20kHz | 150Hz-20kHz |
Impedance | 40 | 40 |
Midrange | 4″ (100mm) | 4″(100mm) |
Tweeter | Aluminium inverted dome tweeter | |
Cone | Flax | Flax |
Voice-coil diameter | 1″ (25mm) | 1″ (25mm) |
Voice-coil height | 5/16” (8mm) | 5/16″ (8mm) |
Magnet | Neodymium | Neodymium |
Surround | Butyl | Butyl |
Type | 2-way surround coaxial kit | Central speaker |
Maximum power | 80W | 50Wx2 |
Nominal power | 40W RMS | 25W RMS x2 |
Sensitivity (2,83V/1m) | 88dB | 82.7dB |
Frequency response | 150Hz-20kHz | 150Hz-20kHz |
Impedance | 40 | 40 |
Midrange | 4″ (100mm) | 4″ (100mm) |
Cone | Flax | Flax |
Voice-coil diameter | 1″ (25mm) | 1″ (25mm) |
Voice-coil height | 5/16″ (8mm) | 5/16″ (8mm) |
Magnet | Neodymium | Neodymium |
Surround | Butyl | Butyl |
Crossover | Integrated |
ISUB MBZ 2
- Type: Subwoofers kit
- Maximum power: 150W x 2
- Nominal power: 75W RMS x 2
- Sensitivity (2,83V/1m): 93.3dB
- Impedance: 2Ω
- Subwoofer: 8″ (200mm)
- Cone: Polyglass
- Voice-coil diameter: 13/8″ (35mm)
- Voice-coil height: 1/2″ (13mm)
- Magnet: Neodymium
- Surround: Butyl
Thank you for choosing Focal kits IS MBZ 100, IC MBZ 100, ICR MBZ 100, ICC MBZ 100 & ISUB MBZ 2, and for sharing our passion for sound and for music. Designed using acoustic technologies, these p kers Integrate Focals perfectionist believes, developing products with high power handling, and unrivalled sound quality. To obtain the best results from this product, we recommend that you follow carefully all the Information contained In this user’s manual. It not correctly followed, any t ult observed may not be covered by the warranty.
Conditions of warranty
All Focal loudspeakers are covered by warranty drawn up by the official Focal distributor iri your country. Your distributor can provide all details concerning the conditions of warranty. Warranty cover extends at least to that granted by the legal warranty in force in he country where the original purchase invoice was issued.
Important recommendations
Before attempting any installation, check first how much space is available to 1t the speakers into the vehicle (cf plans on the packaging), then proceed with the cutting. In the case or assembly in original location, check that there is enough space between the speaker and the protections grille.
- Ensure the speaker is clean from debris and metallic particles that may be attached (,especially after drilling).
- Clean before mounting the speakers.
Running period
IS MBZ 100, IC’ MBZ mo, ICR MBZ 100, ICC MBZ 100 & ISUB MBZ 2, drive units use the very latest components. To ensure such complex mechanical elements work 1n harmony with each other, they must be allowed to function correctly in this environment. Changes 1n temperature and humidity are regarded as very hostile. In order to get the best of your IS MBZ 100, IC MBZ 100, ICR MBZ 100, ICC MBZ
100 & ISUB MBZ 2 speakers, a running-in period must be respected to ensure they are ready for this. We recommend that. once the system is ready for listening, the drive units should be run-in with medium volume setting, with music that has the full bandwidth of frequencies (sub-bass through treble). This running-in period should last for a few weeks, to gain the full potential. After which the excellent performance of your IS MBZ 100, IC: MBZ 100, ICR MBZ 100, ICC MBZ 100 & I SUB MBZ 2 kits can be fully appreciated.
Installation
- Identify the location of your woofers, but also of your tweeters 1n the case of a 2-way component kit.
- Carefully disconnect and disassemble the original speakers.
- Mount the Focal speaker driver m the original slots of your vehicle and connect them.
Installation details may vary from model to model, so we recommend that you watch our installation tutorials onhne.
In order to improve the performance of your installation and to eliminate unwanted noise, we recommend the use of the Focal B.A.M.
Correct elimination of this product.
This marking indicates that within the EU this product should not be disposed of with other household wastes. To prevent any risk to the environment or human health, please recycle them responsibly to encourage the reuse of material resources. To return your used device, please use the return and collection systems available, or contact the retailer where you purchased the product. They can recycle this product safely.
Product Data Sheet
The ISUB MBZ 2 high-fidelity subwoofers kit for Mercedes-Benz is part of the reference solution for drivers who want to easily and discreetly integrate a complete high-end audio system into their vehicle. The stylishly designed left and right subwoofers are perfectly integrated into the vehicle floor and considerably increase the level and quality of bass in the vehicle’s interior. They have been developed to make optimum use of the space available in the original locations, thanks to exclusive Focal technologies.
Key Points
- Developed in France by Focal
- Simple and quick installation
- Invisible integration in the vehicle’s interior
- High fidelity sound and high power capability
- Dedicated left and right speakers
- Plug & Play OEM connector dedicated to the vehicle
- Installation video tutorial (available)
Type | Subwoofers kit |
Subwoofer | 8″ (200mm) |
Voice coil diameter | 13/8″ (35mm) |
Voice coil height | 1/2″ (13mm) |
Magnet | Neodymium |
Cone | Polyglass |
Surround | Butyl |
Impedance | 2Ω |
Max. power | 150W x 2 |
Nom. power | 75W RMS |
Sensitivity (2.83V/1m) | 93.3dB |
Subwoofer
SPECIFICATIONS
Nominal power | 75W by coil | |
Maximum power | 150W by coil | |
Sensitivity | 93.3dB | |
Nom. impedance | 2 Ω | |
Cone | Polyglass | |
Surround | Butyl | |
DC resistance | 2 Ω | |
VC diameter | 35mm | 13/8″ |
Former | Kapton | |
Layers | 2 | |
Wire | Copper | |
Net weight | 1410g | 3.11 lbs |
Frequency response | 35-200Hz |
MECHANICAL DRAWING
Dimensions in mm
PARAMETERS
Rdc | 2.06 Ω |
Fs | 52Hz |
Mms | 39.32g |
Cms | 0.235mm/N |
Vas | 15.2 l |
Qts | 0.534 |
Qes | 0.639 |
Qms | 3.25 |
Bxl | 6.46N/A |
Sd | 213.82cm² |
SPL | 87.3dB |
Xmax | 7.5mm |
Check Online Updated Compatibility list and Installation manual.
To set up your Focal Inside product, please watch online the installation video.
www.focal.com/focal-inside/videos/
Documents / Resources
![]() |
FOCAL IS MBZ 100 2-Way Component Speaker [pdf] Owner's Manual IS MBZ 100, IC MBZ 100, 2-Way Component Speaker, Component Speaker, 2-Way Speaker, Speaker, IS MBZ 100 |