FMOUSE M101 Wireless Mouse User Manual

FMOUSE-logo

FMOUSE M101 Wireless Mouse

FMOUSE M101 Wireless Mouse-fig1

Thank you for choosing M101 wireless mouse! Please read the manual carefully before you start using our product

Specification

  • 1600CPI, high resolution
  • Effective transmission distance 10M
  • 18months intelligent power saving

OVERVIEW

FMOUSE M101 Wireless Mouse-fig2

  1. Left click
  2. Right click
  3. Non-slip wheel
  4. ON/OFF Button
  5. Battery
  6. USB
    USB Nano Receiver
  7. Dual Mode switching
    2.4G Mode

2.4G operation instructions(Single mode Version Plug the NANO receiver into your computer’s USB port and you’re ready to go

  1. Update to i0S 13 system
  2. After the system is updated, open Settings Accessibility Touch Assist Touch Open
  3. Move the mouse to Bluetooth pairing mode, open the phone on tablet, search for pairing

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device.pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, iT not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not oCCur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user Is encouraged to try to correct the interterence by one or more of the following measures:

  • Reorient or relocate the recelving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit diferent from that to which the receiver is connected.
  • Consuit the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF expos condition without restriction. requirement. The device can be used in portable exposure

FMOUSE M101 Wireless Mouse-fig3

  1. Open the computer
  2. Plug the wireless “NANO Receiver” into the computer’s USB port
  3. Push the “ON/OFF switch” on the bottom of the mouse to the ON” side.
  4. Move the mouse or tap the left and right buttons to use it normally.
  • When the mouse moves slowly, check the battery, please replace the new one;
  • When the mouse is not connected, please check if the power Switch at the bottom of the mouse is turned on, or The NANO
    receiver is moved to other USB interfaces for use;
  • If you are not using the mouse for a long time, please turn off the power Witch manual to save power.
  • If the mouse is not used for a long time, it will automatically go to sleep, and you can move the mouse or Press any key to
    wake up
  • Bluetooth 5.1 version support: Win8/Win10/Mac/Android system,Support for ios 13 and above.

Read Manual Before Product use

Battery warning!
Battery warning!:improperly replaced batteries may present a risk of leak or explosion and personal injury. Mistreated rechargeable batteries may present a risk of fire or chemical burn Do not disassemble or expose to conducting materials, moisture liquid,or heat above 54 C( 130°t ). Do not use or charge the battery if it appears to be leaking king, discolored, deformed, or in any way abnormal. Do not leave your battery discharged or unused for extended periods Do not short circuit. Your device may contain an internal, rechargeable battery that is not replaceable Battery life varies with usage. Non-operational batteries should be discarded according to local laws.If no laws or regulations govern, dispose of your device in a waste bin for electronics. Keep batteries away from children.Class 1 laser product : this optical device complies with international standard IEC/EN 60825-1 : 2007,class 1 Laser Product, and also complies with 21 CFR 1040.10, except for deviations pursuant to laser Notice No 50, dated June 24, 2007:1) Emission of one or two independent parallel beams of infrared user-invisible light; 2) maximum power of T16 micro watts CW, Emitted wavelength is 832-865 nm:3) Operating temperature between 5°C and 40°C

WARNING!Use of controls, adjustments or performance of procedures beyond those specified herein may result in hazardous radiation exposur
The product contains class 1LED.Operating temperature between 0°C and 40°C

Class 1M Laser product: This optical device complies ith international standard IEC/EN 60825-1: 2007, class im laser product, and also complies With 21CFR 1040.10, except Tor deviations pursuant to laser Notice No,50, dated June 24. 200) emission or diverging beam of minimum +/-2 of infrared user.invisible light 2) maximum power of 1.4 milliliters CW Emitted wavelength is 832.865 nm:3) operating temperature between 5°C and 40°C

WARNING Laser Radiation. Viewing the laser output with magnifying optical instruments within a 100mm distance may pose an eye hazard” INVISIBLE LASER RADIATION DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS CLASS IM LASER Pro Duct

WARNING ! The power supply is for indoor use only. Only use the power supply included with your product Do not attempt to repair or use a damaged power supply. Do not immerse the power supply in water or subject it to physical abuse. Inspect the power supply regularly for cable, plug, and casing damage

Use Guidelines : Safe & Proper Use Of Your Product

  1. Do not open or modity the product except for battery removal and replacement.
  2. .Do not disassemble or attempt to service this product because there is a risk of radiation exposure,which could injury you.
  3. Do not direct the infrared/laser beam at anyone eye or a reflective object.
  4. Do not immerse product in any liquid or expose to heat or moisture.
  5. It product is exposed to out-of-range temperature environments power off the device until temperature has stabilized within the specified operating temperature range.
  6. Use only provided power supply devices With this product. Do not modity the power supply
    Do not charge your product during an electrical storm
  7. This is nota children’s product and is not intended for use by children under 14 years old
  8. It product is operating improperly, call support.
  9. Product must be returned to the manufacturer for any service or repair
  10. Long periods of repetitive motion using the product may be associated with nerve, tendon or muscle injury in your hands. Wrists, arms, shoulders, neck or back. See a qualified health professional for pain, numbness, weakness, swelling, burning, cramping or stiffness.
  11. This product is safe under normal and reasonably foreseeable misuse operating conditions It the product is operating improperly, contact fmouse support product must be returned to fmouse for any service or repair.
  12. .Any changes or modifications to the product that are not expressly approved by fmouse may void the user’s authori to operate the equipment and your.

 

Documents / Resources

PDF thumbnailM101 Wireless Mouse
User Manual · M101, 2A4PY-M101, 2A4PYM101, M101 Wireless Mouse, Wireless Mouse, Mouse

References

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. When I use the wheel on my new FMOUSE M101 in EXCEL 2010, it only increases/decreases the size of the font. I want it to scroll through my worksheet. What am I doing wrong?

    Dott Baumann asks When I use the wheel on my new FMOUSE M101 in EXCEL 2010, it only increases/decreases the size of the font. I want it to scroll through my worksheet. What am I doing wrong?
    Manuals+ clarified question
    Question

    Why does my FMOUSE M101 scroll wheel change font size in Excel 2010 instead of scrolling?

    Answer

    The behavior you are describing is typically not a hardware fault with your FMOUSE M101, but rather a software setting or a stuck key on your keyboard. In Microsoft Excel, the scroll wheel is programmed to zoom (which changes the appearance of font size) instead of scrolling if the Ctrl key is being held down.

    Please check the following to resolve the issue:

    • Check your Ctrl key: Ensure that neither of the Ctrl keys on your keyboard are physically stuck or pressed down.
    • Excel Options: In Excel 2010, go to File > Options > Advanced. Under the 'Editing options' section, look for a checkbox labeled 'Zoom on roll with IntelliMouse'. If this is checked, uncheck it and click OK.
    • Mouse Driver: While the M101 is a standard plug-and-play device, ensure no third-party mouse software is remapping the wheel to 'Ctrl + Scroll'.

    If the mouse scrolls correctly in a web browser or other documents, the issue is definitely isolated to your Excel settings or your keyboard's Ctrl key.

  2. Hello, I purchased a “FMouse M101 wireless mouse, with butterflies and flower printed on the surface. Sadly, the mouse does not activate with the switch on ON. I have had some lucky streaks where it worked after jiggling the ON button a few times. This time it is not staying on at all. I have replaced the battery. I suspect is a connectivity issue with the battery. I really do like the “mouse” and would like to troubleshoot or get it replaced. Love to hear from you. Thank you, Angelica

    Angelica PradoStern asks Hello, I purchased a "FMouse M101 wireless mouse, with butterflies and flower printed on the surface. Sadly, the mouse does not activate with the switch on ON. I have had some lucky streaks where it worked after jiggling the ON button a few times. This time it is not staying on at all. I have replaced the battery. I suspect is a connectivity issue with the battery. I really do like the "mouse" and would like to troubleshoot or get it replaced. Love to hear from you. Thank you, Angelica
    Manuals+ clarified question
    Question

    Why is my FMOUSE M101 wireless mouse not turning on even after replacing the battery and toggling the power switch?

    Answer

    Based on your description and the FMOUSE M101 manual, here are the troubleshooting steps to address the power issue:

    • Check Battery Orientation: Ensure the battery is inserted correctly according to the polarity markings inside the battery compartment. Even with a new battery, a loose fit or incorrect orientation will prevent the mouse from turning on.
    • Inspect the Battery Contacts: Since you suspect a connectivity issue, check the metal springs/tabs inside the battery compartment. If they are bent or dirty, they may not be making a solid connection. Gently clean them with a dry cloth or a cotton swab with a tiny amount of rubbing alcohol.
    • Verify the Power Switch: The manual indicates the ON/OFF switch is located on the bottom. If the mouse only works when "jiggling" the switch, there may be a mechanical failure or debris inside the switch housing. Try blowing compressed air into the switch gap to clear any dust.
    • Receiver Connection: While this won't affect the physical power light (if applicable), ensure the USB Nano Receiver is firmly plugged into your computer's USB port. The manual suggests trying a different USB port if the mouse is not detected.
    • Wake-up Mode: Note that the mouse has an intelligent power-saving feature. If it has been idle, you may need to click the left or right buttons to wake it up rather than just moving it.

    If the mouse still fails to stay powered on after these steps, it likely has a hardware defect in the internal power circuitry or the physical switch. Since you are interested in a replacement, we recommend contacting the retailer where you purchased the device or the manufacturer directly, as Manuals+ is an archive for manuals and does not handle product warranties or replacements.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.