FloorMuffler Encore Rigid Core Underlayment
Product Specifications:
- Product Name: High Performance Acoustical Underlayment & Moisture Barrier
- Coverage Area: 300 sq. ft.
- Thickness: 1.1 mm
- Dimensions: 48″ x 75′
- Application: For vinyl plank floors with or without pre-attached pad
- Recommended Use: Residential & Commercial
- Installation Method: Floating Floor
Product Usage Instructions
Pre-Installation Preparation:
- Ensure the subfloor is structurally sound, level, and free of dust and debris.
- Check for protruding nails or defects in the subfloor. For concrete subfloors, ensure it meets acceptable moisture levels.
Installation Steps:
- Start in a corner with the tape strip side next to the wall and the overlapping film towards the open room.
- Unfold the overlap plastic film, extending it 3 inches from the foam, ensuring to overlap only the moisture barrier plastic film.
- Remove the adhesive liner and adhere the underlayment to the plastic film overlap.
- Install the flooring following the manufacturer’s instructions.
BEST FOR SOUND REDUCTION
- HIGH PERFORMANCE ACOUSTICAL
UNDERLAYMENT & MOISTURE BARRIER. - FOR VINYL PLANK FLOORS WITH OR WITHOUT PRE-ATTACHED PAD*.
- FOR RESIDENTIAL & COMMERCIAL APPLICATIONS.
- FOR FLOATING FLOOR INSTALLATIONS.
- SELF-SEALING LIP & TAPE SYSTEM.
Item No. 0265291
SKU 1013244994
300 sq. ft / 1.1 mm x 48″ x 75′
Distributed by:
Diversified Industries, Inc.
121 High Hill Road
Swedesboro, NJ 08085 USA.
*Follow your flooring manufacturer’s installation instructions.
Flooring systems protected under USPTO No. 8,720,177; 8,931,227 and 9,133,628.
Installation Instructions
- Make sure the subfloor is structurally sound, level and is free of dust and debris.
- Check for protruding nails and/or defects in the subfloor. If installing over concrete,the concrete must meet the floor covering manufacturer’s acceptable moisture tolerance range.
- Start in a corner with the tape strip side next to the wall and the overlapping film towards the open room.
- Install floorMuffler® Encore (overlap film side down) parallel to the wall in the opposite direction that you plan to install the flooring planks.
- When installing the floorMuffler® Encore, leave at least 2” going up the wall (you will trim this part after installing the floor).
- Be sure to unfold the overlap plastic film, extending it 3” from the foam.
- Roll out the next roll of floorMuffler® Encore in the same manner, making sure that the foam seams are butted together.
- Be sure to overlap only the moisture barrier plastic film and not the underlayment pad.
- Remove the adhesive liner and adhere the underlayment to the plastic film overlap.
- Install the flooring per manufacturer’s instructions
floorMuffler®
it’s what’s underneath that counts
floormuffler.com
1 800 440 6008
FAQ
Q: Can this underlayment be used with any type of flooring?
A: This underlayment is specifically designed for vinyl plank floors with or without a pre-attached pad. It is recommended to follow your flooring manufacturer’s installation instructions for compatibility.
Q: Is the underlayment suitable for both residential and commercial applications?
A: Yes, this underlayment is suitable for both residential and commercial applications.
Q: How do I ensure proper installation of the underlayment?
A: Ensure that the subfloor is prepared correctly, follow the step-by-step installation instructions provided, and refer to any additional guidelines from your flooring manufacturer.
Documents / Resources
![]() |
FloorMuffler Encore Rigid Core Underlayment [pdf] User Guide Encore Rigid Core Underlayment, Encore, Rigid Core Underlayment, Core Underlayment, Underlayment |