FLEXSCREEN Remove Window Screens User Guide

FLEXSCREEN Remove Window Screens

Specifications

INSTALLATION & REMOVAL

IMPORTANT REMINDER: FlexScreens have a front and back. The front is where the warning label is placed, and you can see the mesh welded to the frame. When applying pressure, please be sure to press only on the front side of the screen to avoid possible damage.

INSTALLATION

• STEP 1
  While keeping the sides compressed, place one top corner of the screen into the screen track.
• STEP2
  Keeping both sides compressed, place the opposite top corner into the screen track.
• STEP3
  Continue to keep sides compressed, and insert screen into a bottom corner.[Lift slightly if your window hos a lip on the sill.] Release this side of the screen.
• STEP4
  Place the lost corner into the screen track and release completely once oil corners ore in place.

REMOVAL

• STEP 1
  Gently press on the center of the screen until you con wrap your hands around the FlexScreen frame. Squeeze both sides inward L/11 -611
• STEP2
  While keeping the sides compressed, lift the screen up and remove one of the bottom corners from the screen track.
• STEP3
  Remove the opposite bottom corner from the screen track.
• STEP4
  With both corners out of the screen track, pull FlexScreen down from the top and remove the screen.

SCAN THE QR CODE FOR AN INSTRUCTIONAL VIDEO More info flexscreen.com *For windows that are wider than they are tall, rotate the screens 90 degrees and proceed with instructions using the horizontal sides,