FLEXCLIP Wireless GO Installation Guide

FLEXCLIP-LOGO

FLEXCLIP Wireless GO

FLEXCLIP-Wireless-GO-PRODUCT

The FlexClip GO is a set of three clips for the Wireless GO and Wireless GO II that allow for maximum versatility when mounting a transmitter onto talent and other objects. It includes the MagClip GO, CrossClip and Vampire Clip.

Includes:

  • MagClip GO for easy mounting of the transmitter onto clothing or magnetic surfaces
  • CrossClip allows the transmitter to be discreetly mounted vertically in either orientation
  • VampireClip can be used to attach the transmitter to clothing or fabric using the integrated double-tooth pin

MAGCLIP GO ClipFLEXCLIP-Wireless-GO-FIG 1MAGCLIP GO MagnetFLEXCLIP-Wireless-GO-FIG 2

MECHANICAL SPECIFICATIONS MAGCLIP GO

Weight (grams):              14

Dimensions Clip
(millimetres): Width: 55
Height: 21.5
Depth: 5
Magnet
Width: 27.5
Height: 18.5
Depth: 4
CROSSCLIP

Weight (grams):

 

4

Dimensions (millimetres): Width: 35.5

Height: 41.5

Depth: 5.5

VAMPIRECLIP

Weight (grams):

 

6

Dimensions (millimetres): Width: 35

Height: 20

Depth: 7

CROSSCLIPFLEXCLIP-Wireless-GO-FIG 3VAMPIRECLIPFLEXCLIP-Wireless-GO-FIG 4

MECHANICAL SPECIFICATIONS MAGCLIP GO

Weight (grams):              14

Dimensions Clip
(millimetres): Width: 55
Height: 21.5
Depth: 5
Magnet
Width: 27.5
Height: 18.5
Depth: 4
CROSSCLIP

Weight (grams):

 

4

Dimensions (millimetres): Width: 35.5

Height: 41.5

Depth: 5.5

VAMPIRECLIP

Weight (grams):

 

6

Dimensions (millimetres): Width: 35

Height: 20

Depth: 7

rode.com

Documents / Resources

PDF thumbnailWireless GO
Installation Guide · Wireless GO, GO

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.