FLAUS QUICK START GUIDE
The Quickstart Guide
To Start Flausing
Mouth, meet Flaus
Power it up
The single “F” button on your flosser turns the power on and off, and controls the three speed settings.
Click-through speeds:
x1=Low
x 2 = Medium
x3=High
x 4= Off
Memory Mode:
Use your favorite speed for 30 seconds, and Flaus will recall this preference the next time you floss. To exit memory mode and change the speed, press the power button to turn off, press again to turn on, and press quickly to cycle through speeds.
Bite me
Use the bite pad on the back of your Flaus to control the floss going in and out of tight teeth.
With the flosser turned on to your desired speed, place the floss between two teeth.
Bite down gently on the bite pad with your opposing teeth to control the pressure as the floss glides in.
PRO TIP: If the floss is getting too loose to control, just rinse and reload a fresh head.
Flaus likes a pro
Don’t force it – let the sonic vibrations do the work, and do those tight spots last.
 |
Gently guide the floss against the gum line in a Y-shape. |
 |
Wrap the floss to create a C-shape around the tooth. Repeat! |
Removing the Flaus Head
Nest the curved neck of the flosser into the inner crease of your fingers, with your thumb placed flat across the bite pad.
With both arms of the floss head against a flat surface, gently apply downward pressure through the thumb, and rotate your thumb inwards. The floss head will pop off one side at a time.
PRO-TIP: Always maintain your protective grip on the front of the neck to prevent damage to the device.
Rinse, reuse, recycle
 |
Getting gross? Just rinse the floss under clean water  or dip it in mouthwash to de-gunk as you go. |
 |
Rinse used Flaus Heads and collect them in a sealed container. Head to goflaus.com/recycle to send them to a dedicated oral care recycling facility. |
Applying the Flaus Head
| Align the skinny part of the Flaus Head with the open ridge on the back of the neck. | With your index finger and thumb, push the Flaus Head onto the mount. You will feel it click into place. |
 |
 |
Battery + charging
Flosser light indicates battery while in use:
- Solid: > 50% battery
- Slow flashing: < 50% battery
- Fast flashing: < 10% battery
Plug in the charging base to a 5V/2.0A USB-A outlet or power adapter and place the Flaus in the base to charge:
- Slow flashing = charging
- Solid light = fully charged (light turns off after 2 min)
BFF: best Flaus forever
Can I use my Flaus Head more than once?
Absolutely! Just give it a quick rinse under water (just like your toothbrush head) or dip it in mouthwash between uses.
What if I usually break floss?
Our teeth are as unique as our fingerprints -everyone will go through Flau’s Heads at different rates. Be patient, we find it usually takes new Flausers about 10 sessions to find their own techniques to minimize floss breakage.
PRO-TIPS: Don’t force it, let the vibrations do the work, and Flaus your tightest spots last!
Flaus fanatics
How long until I’m an expert, Flauser?
They say it takes 28 days to develop a habit – commit to your new daily Flaus practice and within 3-4 weeks you’ll wonder how you ever lived life BF (before Flaus)!
PRO-TIP: To track your first 28 days as a Flauser, we’ve provided a Habit Tracking postcard in your Flaus Kit!
For warranty information and registration, visit: www.goflaus.com/warranty
Questions?
support@goflaus.com / @goflaus
How to Flaus
Scan for the cheat code:
https://tapk.it/qr/rs4E0WAa0aP1
With this video, you’ll be a pro in less than 90 seconds.
Documents / Resources
 |
FLAUS V91071 Electric Flosser [pdf] User Guide V91071, V91071 Electric Flosser, Electric Flosser, Flosser |