500141 Networks Customised Intelligent
“
Specifications
Model: TP FIT 48 V
Manufacturer: Smartscale NewCo AG
Email: info@fit-ebike.ch
Website: fit-ebike.com
Product Usage Instructions
Proper Use
Make sure to follow the manufacturer’s guidelines for proper use
of the TP FIT 48 V.
Improper Use
Avoid any improper use of the product to prevent damage or
accidents. Refer to the manual for details on what constitutes
improper use.
Technical Data
Refer to the technical data section for detailed information on
the battery specifications and other technical details.
Transportation and Storage
Transportation
When transporting the e-bike or the battery, ensure they are
securely fastened to prevent any damage during transit. Follow the
provided guidelines for shipping the battery.
Storage
Store the TP FIT 48 V in a safe and dry place. Follow the
storage mode instructions to ensure optimal performance and
longevity of the product.
Break-in Operation
Before regular use, it is recommended to carry out a break-in
operation. Follow the steps outlined in the manual for preparing
and executing this process.
Fitting
Fitting the Battery
Insert and remove the battery carefully following the
instructions provided. Ensure a secure fit to avoid any issues
during operation.
FAQs
Q: How should I transport the e-bike?
A: When transporting the e-bike, make sure it is securely
fastened to prevent any damage.
Q: What is the recommended storage mode for the TP FIT 48
V?
A: The recommended storage mode ensures optimal performance and
longevity of the product. Follow the guidelines in the manual.
Q: Do I need to carry out a break-in operation?
A: It is recommended to carry out a break-in operation before
regular use. Refer to the manual for detailed instructions.
“`
INSTRUCTION MANUAL TP FIT 48 V
500141
NETWORKED CUSTOMISED INTELLIGENT
Smartscale NewCo AG Luzernstrasse 84 CH-4950 Huttwil
T +41 62 959 53 00 info@fit-ebike.ch fit-ebike.com
INSTRUCTION MANUAL
TP FIT 48 V
TABLE OF CONTENTS
1 PREFACE
3
2 ABOUT THESE OPERATING INSTRUCTIONS
4
2.1 MANUFACTURER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.2 EU IMPORTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.3 LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.4 DECLARATION OF CONFORMITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.5 ON INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.6 WARNINGS IN THESE OPERATING INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3 SAFETY INSTRUCTIONS
5
3.1 GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3.2 RECHARGEABLE BATTERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4 PRODUCT AND TECHNICAL SPECIFICATIONS
6
4.1 TP FIT 48 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4.2 PROPER USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4.3 IMPROPER USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4.4 TECHNICAL DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4.4.1 BATTERY TP FIT 48 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
5 TRANSPORTATION AND STORAGE
8
5.1 TRANSPORTATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5.1.1 TRANSPORTING E-BIKES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5.1.2 TRANSPORTING THE BATTERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5.1.3 SHIPPING THE BATTERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5.2 STORAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5.2.1 STORAGE MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5.3 BREAK IN OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5.3.1 PREPARING FOR A BREAK IN OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5.3.2 CARRYING OUT A BREAK IN OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
6 FITTING
10
6.1 FITTING THE BATTERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
6.1.1 INSERTING THE BATTERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
6.1.2 REMOVING THE BATTERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
7 OPERATION
11
7.1 CHARGING THE BATTERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
7.1.1 CHARGING OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
7.2 DISPLAY AND SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
7.2.1 CHARGE LEVEL CHECK ON BATTERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
8 ERROR MESSAGES
12
8.1 BATTERY ERROR CODES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
9 CLEANING AND SERVICING
13
9.1 BASIC CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
9.1.1 CLEANING THE BATTERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
10 TROUBLESHOOTING, FAULT CLEARANCE AND REPAIR
14
10.1 TROUBLESHOOTING AND FAULT CLEARANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
10.1.1 DRIVE SYSTEM OR DISPLAY DOES NOT START UP . . . . . . . . . . . . . . . . . . . . . . . . . . 14
10.1.2 ERRORS IN THE ASSISTANCE SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
10.2 REPAIR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
10.2.1 ORIGINAL PART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
11 RECYCLING AND DISPOSAL
16
11.1 DISPOSAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
FIT_Manual_Battery_TP_48V_V2_en.pdf | Version 02 | 06.06.2025
2
INSTRUCTION MANUAL
TP FIT 48 V
1 PREFACE
Dear FIT customer,
The FIT system offers many useful functions and options and we are pleased that you have decided to choose our system.
Please read through the operating instructions carefully to ensure you use the system safely and get off to a quick start.
We hope you enjoy discovering the FIT’s functions and have a fun ride every time you use it.
Thank you for placing your trust in FIT.
Your FIT Team
FIT_Manual_Battery_TP_48V_V2_en.pdf | Version 02 | 06.06.2025
3
INSTRUCTION MANUAL
TP FIT 48 V
2 ABOUT THESE OPERATING INSTRUCTIONS
2.1 MANUFACTURER
Smartscale NewCo AG Luzernstrasse 84 CH-4950 Huttwil fit-ebike.com/en-en/
2.2 EU IMPORTER
Smartscale NewCo Europe GmbH Im Höning 5 DE-63820 Elsenfeld
2.3 LANGUAGE
The original operating instructions are written in German. A translation is invalid without the original operating instructions.
2.4 DECLARATION OF CONFORMITY
Biketec GmbH hereby declares that the products described in these operating instructions comply with EU directives. The complete EU Declaration of Conformity is available online at: fit-ebike.com/en-en/service/declaration/
2.5 ON INFORMATION
Different markings are used in the operating instructions to make them easier to read.
2.6 WARNINGS IN THESE OPERATING INSTRUCTIONS
Warnings indicate hazardous situations and actions. You will find the following warnings in the operating instructions:
Exclamat
DANGER May lead to serious or even fatal injuries if ignored. Medium-risk hazard.
Exclamat
CAUTION May lead to minor or moderate injuries if ignored. Low-risk hazard.
INFO-CIR NOTICE May lead to material damage if ignored.
FIT_Manual_Battery_TP_48V_V2_en.pdf | Version 02 | 06.06.2025
4
INSTRUCTION MANUAL
TP FIT 48 V
3 SAFETY INSTRUCTIONS
3.1 GENERAL INFORMATION
Please read all safety instructions carefully. Failure to comply with the warnings or take residual risks into account may result in electric shock, fire and/or serious injury.
Keep the operating instructions in a safe place and have them readily available to consult. Pass these instructions on if you provide your e-bike for someone else’s use.
The generic names used in these operating instructions, such as motor, battery and operating element, all refer to original FIT e-bike components.
3.2 RECHARGEABLE BATTERY
Remove the battery from the e-bike before you start working on the e-bike (e.g. inspection, repair, fitting, maintenance, work on the chain), transport it by car or plane or if you are not going to use it for extended period of time. There is a risk of injury if the e-bike system is activated unintentionally.
Do not open up the battery as you risk causing a short circuit.
Protect the battery from heat (e.g. including continuous direct sunlight), fire and being submerged in water. Do not store or operate the battery in close proximity to hot or flammable objects as this pose a risk of explosion.
Keep the unused battery away from paper clips, coins, keys, nails, screws or other metal objects which could cause an electrical arc between the contacts. A short circuit between the battery contacts can cause fire or burns.
Avoid any physical loads on the battery. They may inflict damage to the battery cells and cause flammable substances to leak out.
Do not put the charger and battery down next to flammable materials. Only charge batteries when they are dry and in a fireproof place. There is a risk of fire due to heat accumulating during charging.
The e-bike battery must not be left unattended while it is charging.
If the battery is used incorrectly, liquid may leak from it. Avoid coming into contact with the liquid. Rinse off with water in the event of accidental contact. If the liquid gets into eyes, seek medical attention. Leaked liquid can cause skin irritation and burns.
Vapours may be emitted if the battery is damaged or used improperly, ventilate with fresh air and consult a doctor if you suffer any pain or discomfort. The vapours can irritate the airways.
Charge the battery with original FIT chargers only. Risk of fire cannot be ruled out if non-original FIT chargers are used.
Use the battery in e-bikes with the FIT system only. This is the only way that the battery will be protected from dangerous overloading.
Only use original FIT rechargeable batteries which the manufacturer has approved for your e-bike. Using other batteries can result in injuries and risk of fire. FIT accepts no liability and offers no warranty if other batteries are used.
Keep the battery away from children.
Our e-bike rechargeable batteries are lithium-ion batteries which are developed and manufactured to the latest technical standards. Lithium-ion batteries have a high energy content when charged. In the event of a defect, possibly not visible on the outside, lithium-ion batteries may catch fire in very rare instances and under unfavourable conditions.
FIT_Manual_Battery_TP_48V_V2_en.pdf | Version 02 | 06.06.2025
5
INSTRUCTION MANUAL
TP FIT 48 V
4 PRODUCT AND TECHNICAL SPECIFICATIONS
4.1 TP FIT 48 V
TP batteries blend stylishly into the down tube and can be easily inserted or removed without any tools. The batteries are interchangeable thanks to their plug-and-play system. The battery can be conveniently charged while in the bike or when removed. Safe and reliable in their operation, the batteries are perfectly matched to the FIT system.
1. Battery level indicator 2. Charging socket
4.2 PROPER USE
All check lists and instructions for actions in these operating instructions met. Only use original FIT rechargeable batteries which the manufacturer has approved for your e-bike. The rechargeable batteries are designed to supply power to the e-bike motor only and must not be used for other purposes.
4.3 IMPROPER USE
Improper use refers to use which is not described under proper use or goes beyond proper use.
FIT_Manual_Battery_TP_48V_V2_en.pdf | Version 02 | 06.06.2025
6
INSTRUCTION MANUAL
4.4 TECHNICAL DATA
4.4.1 BATTERY TP FIT 48 V
Battery Product code Cell configuration Energy (nominal) Capacity (nominal) Energy (rated) Capacity (rated) System voltage Charging current (maximum) Discharging temperature Charging temperature Storage temperature (recommended) Weight about
TP 700 FIT 48 V
500141
13S3P
Wh 700
Ah 14.83
Wh 693.7
Ah 14.7
V
48
A
4.8
°C -20 to +60
°C 0 to +45
°C 0 to +23
kg
4
TP FIT 48 V
FIT_Manual_Battery_TP_48V_V2_en.pdf | Version 02 | 06.06.2025
7
INSTRUCTION MANUAL
TP FIT 48 V
5 TRANSPORTATION AND STORAGE
5.1 TRANSPORTATION
Exclamat
CAUTION Remove battery before transportation. There is a risk of injury if the drive system is switched on unintentionally.
5.1.1 TRANSPORTING E-BIKES
Never use bicycle racks which use the e-bike’s handlebars or frame to hold the e-bike in an upside-down position. They can exert inadmissible forces on components during transportation. This can cause the supporting parts to break. The specialist dealer will advise you on how to select a suitable rack system properly and how to use it safely. Take the weight of the ready-to-use e-bike into account when transporting. Protect the electrical components and connections on the e-bike from the elements with suitable protective covers. Transport the battery in a dry, clean position where it is protected from direct sunlight.
5.1.2 TRANSPORTING THE BATTERY
Batteries are subject to hazardous goods regulations. Private individuals may transport undamaged batteries in road traffic. Commercial transport operators must comply with regulations on packaging, labelling and the transportation of hazardous goods. Open contacts must be covered and the battery securely packaged.
5.1.3 SHIPPING THE BATTERY
The battery is considered a hazardous good and only trained persons may pack and ship a battery. Contact your specialist dealer.
5.2 STORAGE
Exclamat
CAUTION Store e-bike, display, battery and charger in a clean, dry place where they are protected from sunlight. Do not store outdoors to ensure a long service life. The optimum storage temperature for your e-bike is between 10 °C and 20 °C. Temperatures under -10 °C or above +40 °C must generally be avoided. Store e-bike, display, battery and charger separately.
5.2.1 STORAGE MODE
The battery features a power-saving CHARGE TO STORAGE mode, which minimises discharge from the battery. Configure the CHARGE TO STORAGE mode in the battery settings.
FIT_Manual_Battery_TP_48V_V2_en.pdf | Version 02 | 06.06.2025
8
INSTRUCTION MANUAL
TP FIT 48 V
5.3 BREAK IN OPERATION
INFO-CIR
NOTICE The battery discharges when not in use. This can cause irreparable damage to the battery. The battery must be recharged every 6 months.
The battery may become damaged if it is connected permanently to the charger. Never connect the battery to the charger permanently. If you remove the e-bike from service for longer than four weeks, you need to prepare it for a break in operation.
5.3.1 PREPARING FOR A BREAK IN OPERATION
Remove battery from the e-bike. Charge battery to around 3060% (storage mode). Before longer periods without use, it is recommendable to have your specialist dealer carry out an inspection and basic cleaning and apply preservative agent.
5.3.2 CARRYING OUT A BREAK IN OPERATION
Store the e-bike, battery and charger in a dry, clean environment. We recommend storing them in uninhabited rooms with smoke alarms. Dry locations with an ambient temperature between 10 °C and 20 °C are ideal. Check the battery level after 6 months. If only one battery level LED indicator lights up, recharge the battery to around 3060%.
FIT_Manual_Battery_TP_48V_V2_en.pdf | Version 02 | 06.06.2025
9
INSTRUCTION MANUAL
TP FIT 48 V
6 FITTING
6.1 FITTING THE BATTERY
6.1.1 INSERTING THE BATTERY
1. First insert the lower section of the battery. 2. Ensure that the locking mechanism is open. 3. Push the battery upwards into its end position. The engaged slider holds the battery in position.
6.1.2 REMOVING THE BATTERY
1. Open the locking mechanism. 2. Tilt the top part of the battery forwards. 3. Remove the battery from the e-bike.
FIT_Manual_Battery_TP_48V_V2_en.pdf | Version 02 | 06.06.2025
10
INSTRUCTION MANUAL
TP FIT 48 V
7 OPERATION
7.1 CHARGING THE BATTERY
7.1.1 CHARGING OPTIONS
The battery can be charged while inserted in the e-bike or after it has been removed. Look in the e-bike manufacturer’s original operating instructions to find where the e-bike charging socket is. Connect the charger to the e-bike charging socket (or directly to the battery) to charge. The charge indicator will automatically appear on the e-bike display screen if the battery is fitted into the e-bike. The display backlight will go out after a certain period of time. However, you can press the On-Off button to switch it back on again at any time.
7.2 DISPLAY AND SETTINGS
7.2.1 CHARGE LEVEL CHECK ON BATTERY
1. Battery level LEDs Indicate how much e-bike battery capacity is left. An error code is displayed in the event of a fault. You will find the error table later in these instructions.
2. Checking button for the battery level Lights up the battery charge LEDs to check the remaining battery capacity or a possible fault with the battery itself.
Each lit battery level light represents around 20% of the battery capacity. If the battery is completely discharged, this is indicated by a rapidly flashing LED.
FIT_Manual_Battery_TP_48V_V2_en.pdf | Version 02 | 06.06.2025
11
INSTRUCTION MANUAL
8 ERROR MESSAGES
8.1 BATTERY ERROR CODES
TP FIT 48 V
Flash sequence for the battery charge level LEDs after pressing the battery charge level button
LEDsgo out briefly in sequence from left to right.
LEDs flash on briefly in sequence from left to right.
Description
Action
Permanent Error The battery has a permanent error.
Charge Error The battery has been overcharged and the charger may have a fault.
The battery needs to be replaced. Take your e-bike to your specialist dealer. The battery is considered to have an unknown defect in this state and must not be transported in a vehicle or by air. It is best if you contact your dealer.
Take your e-bike to your specialist dealer.
Current Error There may be a fault in the motor or charger, or the battery may have gone into deep discharge. Temperature Error The battery temperature is outside the permitted range.
Authentication Error An authentication error may have occurred.
Take your e-bike to your specialist dealer.
If flashing persists after the system has not been used for a long time, the battery needs replacing. Take your e-bike to your specialist dealer. The battery is considered to have an unknown defect in this state and must not be transported in a vehicle or by air. It is best if you contact your dealer.
Check the connections for dirt. If the flashing still persists after cleaning the connections and after the battery has not been used for a while, take the e-bike to your specialist dealer.
FIT_Manual_Battery_TP_48V_V2_en.pdf | Version 02 | 06.06.2025
12
INSTRUCTION MANUAL
TP FIT 48 V
9 CLEANING AND SERVICING
9.1 BASIC CLEANING
9.1.1 CLEANING THE BATTERY
Exclamat INFO-CIR
CAUTION Risk of fire and explosion due to penetration by water
The battery is only protected against simple spray water. Penetration by water can cause a short circuit. The battery may self-ignite and explode. Never clean the battery with a pressure washer, water jet or compressed air. Keep contacts dry and clean. Never immerse the battery in water. Never use cleaning agents. Remove the battery from the e-bike before cleaning.
NOTICE Never clean the battery with cleaning agents or with solvents, such as oil, thinners, alcohol or corrosion protection. Clean the battery electrical connections with a dry cloth or paintbrush only. Wipe off the decorative sides with a damp cloth.
FIT_Manual_Battery_TP_48V_V2_en.pdf | Version 02 | 06.06.2025
13
INSTRUCTION MANUAL
TP FIT 48 V
10 TROUBLESHOOTING, FAULT CLEARANCE AND REPAIR
10.1 TROUBLESHOOTING AND FAULT CLEARANCE
10.1.1 DRIVE SYSTEM OR DISPLAY DOES NOT START UP
If the display and/or the drive system do not start up, proceed as follows:
1. Check if the battery is inserted correctly. If not, insert the battery correctly. 2. Start the drive system. 3. If the drive system does not start, remove the battery, check the charging status and charge if necessary. 4. Clean all contacts with a soft cloth. 5. Insert the battery. 6. Start the drive system. 7. If the drive system does not start, contact the specialist dealer.
INFO-CIR
NOTICE If the battery terminal contacts are heavily soiled/oxidized. Take your e-bike to a specialist dealer for a detailed check.
10.1.2 ERRORS IN THE ASSISTANCE SYSTEM
Symptom
Cause
Remedy
Assistance is not available.
Assistance is not available.
Is the speed too high?
Is the battery charged sufficiently?
The motor may become too hot during rides at high temperatures, up long inclines or when carrying a heavy load for a long time. The rechargeable battery, display or operating element may be connected incorrectly, or one or more of them may have a problem. Are the pedals being pushed?
Is the system switched on?
Is the level of assistance set to OFF?
1. Check display screen. The motor assistance is only active up to the maximum speed for which the e-bike is approved.
2. Check battery is charged. 3. Recharge the battery if it is almost flat. 4. Switch off the drive system. 5. Wait a moment and then check again.
6. Contact your specialist dealer.
1. Your e-bike is not a motorbike. Push the pedals.
2. Press on-off button (operating element) to switch on the system.
3. Switch on the assistance by selecting an available assistance level (except OFF).
4. Contact your specialist dealer if you still feel that the no assistance is being supplied.
FIT_Manual_Battery_TP_48V_V2_en.pdf | Version 02 | 06.06.2025
14
INSTRUCTION MANUAL
TP FIT 48 V
Symptom
Cause
Remedy
The assisted journey distance is too short.
It is difficult to pedal.
The battery does not perform as well in winter weather.
This does not indicate a problem.
The journey distance can be shorter depending on the road conditions, the level of assistance and the total light usage time.
Is the battery fully charged?
The battery is a consumable. Repeated charging and long periods of use cause the battery to degrade (loss of power).
Are the tires pumped to an adequate pressure?
Is the level of assistance set to OFF?
The battery charge might be low.
Have you switched on the system with your foot on the pedal?
1. Check battery is charged. 2. Recharge the battery if it is almost flat.
3. If the distance covered with a fully charged battery has become shorter, the battery may be affected. Replace the battery with a new one.
4. If the distance you can cover with one single charge is very short, replace the battery with a new one.
1. Pump up tires.
2. Switch on the assistance by selecting an available assistance level (except OFF).
3. Check battery is charged. 4. Recharge the battery if it is almost flat. 5. Switch on the system again without applying
pressure to the pedals. 6. If assistance is still not supplied, contact your
specialist dealer.
10.2 REPAIR
Special expertise and tools are required for many repairs. That is why only a specialist dealer may perform repairs.
10.2.1 ORIGINAL PART The individual e-bike parts have been carefully selected and matched to one other. Only original parts must be used for maintenance and repair. Observe the operating instructions for the new components.
FIT_Manual_Battery_TP_48V_V2_en.pdf | Version 02 | 06.06.2025
15
INSTRUCTION MANUAL
11 RECYCLING AND DISPOSAL
11.1 DISPOSAL
TP FIT 48 V
Mechanical and electrical equipment, accessories and packaging should be recycled in an environmentally sound manner. Don’t throw them in the garbage!
Only for EU countries: According to European Directives 2012/19/EU, 2006/66/EC and their transposition into national law, defective or unusable waste electrical and electronic equipment, rechargeable batteries and batteries must be collected separately and recycled in an environmentally sound manner.
FIT_Manual_Battery_TP_48V_V2_en.pdf | Version 02 | 06.06.2025
16
Documents / Resources
 |
FIT 500141 Networks Customised Intelligent [pdf] Instruction Manual 48 V, 500141, 500141 Networks Customised Intelligent, 500141, Networks Customised Intelligent, Customised Intelligent, Intelligent |