FIT TECH 38 Modular Island
Hybrid Pro™ Modular Kit 38 is a commanding 20ft x 20ft island exhibit that offers the ideal layout for meetings and demonstrations. Kit 38 features a 16ft tall wall, ideal for prominently displaying your brand, as well as three demonstration areas for optimal product and service show and tell. This exhibit kit will make you stand out from the rest and is available for purchase or rent.
Features and Benefits:
- 16ft tall wall
- Two Laminate Counters (74”W x 40.5”H x 22”D) with storage (65” monitor shown, but not included)
- 17ft dia. fabric structure ring, which is attached to the backwall and kiosks
- Two demonstration kiosks: 59”W x 94H” walls + Hybrid Pro Counter 19’s with graphics (50” monitor shown, but not included) One Hybrid Pro Counter 19 serves as a reception counter
- Kit includes frame, 8 SEG graphic panels, three Hybrid Pro 19 Counters, one Laminate Counter and one Woodcrate
- Flooring and monitors shown not included
- Lifetime hardware warranty against
- manufacturer defects
Dimensions:
Hardware
Assembled unit:
- 207.17”w x 188.98”h x 207.17”d
- 5962mm(w) x 4800mm(h) x 5262mm(d)
Approximate Weight:
- 1225 lbs / 556 kg
Graphics
Refer to related graphic templates for more information Visit: https://www.theexhibitorshandbook.com/downloads/download-graphic-templates
Shipping
- Packing case(s): 1 WOODCRATE-H-02
- Shipping dimensions: WOODCRATE-H-02: 100″W x 50.5″D x 52.5″T 2540mm(l) x 1283mm(h) x 1334mm(d)
- Approximate shipping weight: 1834 lbs / 832 kg
This product may include the following materials for recycle: aluminum, select wood, fabric, cardboard, paper, steel, and plastics.
Additional information:
SETUP INSTRUCTIONS
PROJECT BOM
| SETUP# | HARDWARE | # | DESCRIPTION |
| 20×20 | 20×20 | 1 | 20×20 |
| A1 | 102-100-01-01 | 8 | 100MM LENGTH OF PH2 EXTRUSION-WITH CAM LOCKS BOTH ENDS |
| A2 | 102-111-01-01 | 3 | 111MM LENGTH OF PH2 EXTRUSION-WITH CAM LOCKS BOTH ENDS |
| A3 | 102-300-01-01 | 4 | 300MM LENGTH OF PH2 EXTRUSION-WITH CAM LOCKS BOTH ENDS |
| A4 | 102-600-11 | 4 | 600MM LENGTH OF PH2 EXTRUSION WITH TENSION GLIDES |
| A5 | 242-600-01-01 | 2 | 600MM LENGTH OF PM4R8-WITH CAM LOCKS BOTH ENDS |
| A6 | 242-2310-01-01 | 4 | 2310MM LENGTH OF PM4R8-WITH CAM LOCKS BOTH ENDS |
| A7 | 242-2348-01-10 | 4 | 2348MM LENGTH OF PM4R8-WITH STOP AT 315MM ONE SIDE-WITH CAM LOCKS ONE END |
| A9 | 245-600-11 | 2 | 600MM 4-WAY INTERNAL CONNECTION EXTRUSION W/ 8 TENSION GLIDE |
| A10 | 340-100-01-01 | 4 | 100MM LENGTH OF PHFC4 EXTRUSION-WITH CAM LOCKS BOTH ENDS |
| A11 | 340-1394-01-02 | 8 | 1394MM LENGTH OF PHFC4 EXTRUSION-WITH IB2 LOCK HOLES ONE END-CAM LOCK ONE END |
| A12 | 340-1500-03-03 | 4 | 1500MM LENGTH OF PHFC4 EXTRUSION-WITH MITRE CUT BOTH ENDS |
| A13 | 340-2400-03-03 | 4 | 2400MM LENGTH OF PHFC4 EXTRUSION-WITH MITRE CUT BOTH ENDS |
| A14 | 342-2386-10-10 | 8 | 2386MM OF PMFC4-90-B EXTRUSION -WITH STOPS AT 315MM |
| 410-1000- | 410-1000-42 | 8 | 1000MM LENGTH OF WHITE LAMINATED P90S EXTRUSION |
| 418-1000- | 418-1000-42 | 2 | 1000MM LENGTH OF WHITE LAMINATED PT EXTRUSION |
| 419-1000 | 419-1000 | 2 | 1000MM LENGTH OF PX EXTRUSION |
| CB9 | CB9 | 8 | 90 DEGREE JOINER |
| C-M-01-13 | C-M-01-132100 | 1 | (STRUCTURE-01) 2600MM RADIUS X 450MM H X 50MM RING STRUCTURE |
| C1-1 | COUNTER TOP | 3 | COUNTER TOP |
| C2 | CT-72L-01 | 2 | (TOP-01) 1960MM X 539MM X 30MM BLACK LAMINATE COUNTER TOP BLACK TOP (1595-60) |
| C3-1 | C-W-02-132100 | 2 | (SHELF-01) 906MM X 306MM X 15MM LAMINATE SHELF CUSTOM LAMINATE – W.D.WHITE (D354-60) |
| C3-2 | C-W-02-132100 | 2 | (SHELF-01) 906MM X 306MM X 15MM LAMINATE SHELF CUSTOM LAMINATE – W.D.WHITE (D354-60) |
| EXT-LG-M | EXT-LG-MB | 4 | Large LCD Monitor mount, 37″ – 70″ size, 110 Lb. max. weight, Tilting-with extrusion mounted hardware |
| GRMT-CA | GRMT-CAP-RNG-BLK | 2 | BLACK CAP & RING FOR 2 1/2″ GROMMET (77-24-106) |
| IB2-O | IB2-O | 4 | JOINER BAR (OLD STYLE) |
| C1-2 | LEG | 6 | LEG |
| A15 | LP-300-1000 | 4 | 300MM W X 1000MM H LOCK PANEL |
| A16 | LP-900-1000 | 4 | 900MM W X 1000MM H LOCK PANEL |
| A17 | LP-CD-900-1000 | 4 | 900MM W X 1000MM V LOCK PANEL CABINET DOOR |
| PMFC4-90 | PMFC4-90-B-CAP | 8 | PLASTIC MOLDED END CAP FOR THE PMFC4-90-B EXTRUSION |
| SS1-S | SS1-S | 16 | SHELF SUPPORT PIN |
| SW-FOOT- | SW-FOOT-650-LN | 4 | 650MM SMART WALL FOOT |
| SW-FOOT- | SW-FOOT-900-LN | 2 | 900MM SMART WALL FOOT |
| TC-50MM- | TC-50MM-SILVER | 6 | SILVER ANODIZE FINISH 50MM TUBE CLAMP |
| SETUP# | GRAPHICS | # | DESCRIPTION |
| GR-A1 | HP-38-A-G | 1 | GRAPHIC (A1) (121.68 w X 192.27 h total size ) 117.68 w X 188.27 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner (-WITH CUTS FOR PH2) |
| GR-B1 | HP-38-B1-G | 1 | GRAPHIC (B1) (62.94 w X 98.37 h total size ) 58.94 w X 94.37 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner |
| GR-B2 | HP-38-B2-G | 1 | GRAPHIC (B2) (62.94 w X 98.37 h total size ) 58.94 w X 94.37 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner |
| GR-A2 | HP-38-B-G | 1 | GRAPHIC (A2) (15.85 w X 192.27 h total size ) 11.85 w X 188.27 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner |
| GR-C1 | HP-38-C1-G | 1 | GRAPHIC (C1) (62.94 w X 98.37 h total size ) 58.94 w X 94.37 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner |
| GR-C2 | HP-38-C2-G | 1 | GRAPHIC (C2) (62.94 w X 98.37 h total size ) 58.94 w X 94.37 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner |
| GR-A3 | HP-38-C-G | 1 | GRAPHIC (A3) (121.68 w X 192.27 h total size ) 117.68 w X 188.27 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner |
| GR-A4 | HP-38-D-G | 1 | GRAPHIC (A4) (15.85 w X 192.27 h total size ) 11.85 w X 188.27 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner |
FABRIC, VINYL & UV GRAPHIC CARE GUIDELINES
GENERAL HANDLING FABRIC GRAPHICS
- Your fabric graphics should always be handled in a clean and dry area with clean hands. When possible, use white fabric gloves.
- Be sure fabric is clean and dry before packing.
- Machine washing and/or drying is not recommended for all fabrics. Refer to the chart below for which fabrics are washable.
EMERGENCY STAIN TREATMENT (FABRIC)
- For dry stains, like loose dirt or pencil marks, try inititally using masking tape or Magic Eraser (dry-not moistened).
- Introduce water or liquids to treat stains, if at all possible, treat the stain with fabric off of the frame.
- Place a clean dry cloth behind stain (to absorb stains while being treated). Mositen another cloth initially with just water (distilled water is optimal, if available).
- Gently blot stain with moistened cloth (or small area of moistened Magic Eraser), while trying to push stain through to the back, using the dry cloth to absorb.
- Repeat using care to keep the wet area as small as possible.
- Grandma’s Secret Spot remover can be an effective stain remover. Mix severall drops in a small cup with clean water. Repeat above and using dry cloth on back of stain to absorb.
MACHINE WASHING FABRIC GRAPHICS
- Cold water/delicate cycle/tumble dry low or air dry. For stretch fabrics do not use dryer, let hang dry.
- Use caution on dryer time with graphics containing liners. It’s best to put tension fabric on frame when fabric is still damp and let it air dry. Always be sure that the aluminum frame is clean when mounting the damp graphic.
- Fabric stretch graphics that are washed and mahcine dried may shink up to 3/4″ per every 50″ of fabric in the direction of the stretch and shink up to 1/4″ in non stretch direction.
STORING & PACKING BACKLIT GRAPHICS
- To avoid cracks in the ink or having to steam graphics, Backlit fabrics should be loosely folded with bubble wrap or stored around a tube.
- Avoid folding the graphic tightly to store in a small bag or box.
GENERAL HANDLING VINYL & UV GRAPHICS
- Vinyl banners and rigid graphics should always be handled in a clean and dry area with clean hands. When possible, use white fabric groves.
- Be sure vinyl/ UV is clean and dry before packing. Always follow material handing and packing instrcutions included.
- All vinyl material should be rolled with graphic facing in to protect the graphic printed side. Roll on a tube in available.
- Avoid folding material to reduce the risk of crease lines and chipped inks. If a graphic must be folded, try and fold loosely and as few times as possible.
EMERGENCY STAIN TREATMENT (UV)
- For dry stains, like loose dirt, pencil marks or adhesive, try initially using masking tape, Masking tape can be quite effective at lifting dry surface dirt. Try ‘pulling’ as much of stain away as you can and avoid rubing the stain into the material.
- While using Windex® avoid scrubbing harshly. Too much pressure can fade the graphic print.
GENERAL HANDING OF ROLLABLE PVC PANELS
All mural panels, truss panels and detachables should be rolled with the graphic facing out to protect the graphic printed side. Mural panels should be stored in the original plastic sleeves that are provided with the panels.
STEAMING FABRIC GRAPHICS
- For optimal results, steam wrinkles when fabric is tensioned and installed securely on the frame.
- Fill steamer with clean drinking water or distilled water. Avoid using water containing hard minerals.
- Hold steamer upright and hold close to fabric. Avoid touching fabric with steamer.
- Do not tap steamer as water drips may cause water marks to from on graphic
SETUP NOTES
Redesign of this exhibit without approval by Orbus may result in dangerous and unsafe structures. Nimlok disclaims any responsibility for redesigned exhibits it does not approve in writing. Parts and components such as panels and extrusions are manufactured to metric sizing. Where ever possible sizes have been noted in feet and inches as well as in metric. Below is the imperial to metric sizing table for reference. “Nominal” refers to approximate size.
NOTE: PARTS MAY COME PRE-ASSEMBLIED FOR PACKING PURPOSES.
HELPFUL SETUP QR CODES
Dimensions
Documents / Resources
 |
FIT TECH 38 Modular Island [pdf] User Guide 38 Modular Island, 38, Modular Island, Island |
