FiREBAT T2 Mini PC
Product Information
Specifications
- Display Connectivity: HDMI, DP, Type-C
- Power Adapter: DC
- Interface: USB for keyboard and mouse
- Internet Connection: Network cable or WiFi
Product Usage Instructions
- Connect the display device using one of the following cables – HDMI, DP, or Type-C.
- Connect the provided DC power adapter to the device.
- Connect your own keyboard and mouse to the device via the USB interface.
- Connect to the Internet using either a network cable or WiFi.
- Remember to set up WiFi after turning on the device.
FAQ
Q: Do I need to use the included power adapter?
A: Yes, it is recommended to use the included DC power adapter for optimal performance.
Q: Can I connect to WiFi without setting it up?
A: No, you need to set up WiFi after turning on the device to establish a connection.
Disclaimer
- Please be sure to use the original power supply. The company does not assume any responsibility for any problems or failures caused by any third-party adapters.
- Users can use music videos, pictures, and software provided by third parties, but we do not assume any responsibility for copyright issues or software failures.
- If the product fails, we will strictly abide by the warranty terms, but we will not assume any responsibility for any property damage or economic loss that may be caused during use.
- The device comes with built-in software when it leaves the factory, and it can be used after actual testing. However, if it is deleted or not deleted when looking for compatibility or other problems, it will not cause any impact on the machine. Please note that this is not a problem related to product quality.
- The company reserves the right to improve the product. Product specifications and design are subject to change without prior notice! Please refer to the actual product.
Notes
- Please be extra careful when performing operations that may cause file damage or loss.
- Pay attention to virus protection during the use of the mini PC, and try to use a virus firewall.
- Turn off the power and disconnect the power supply when the mini PC is not used for a long time.
- Do not turn on and off the mini PC frequently in a short time. It is recommended that the interval between two starts is at least 10 seconds, preferably not less than 60 seconds.
- Pay attention to moisture-proofing and keep the use environment clean and sterile. If there is dust on the mini PC, please wipe it with a dry soft cloth.
- Avoid direct strong light to the mini PC and do not approach strong magnetic fields.
- Do not drop liquids such as water and food on the mini PC and do not pull the data cable, power cable, etc.
Packing List
Quick Installation
VESA Bracket Installation
- Some models come with a standing bracket instead of a VESA mount bracket. Please refer to the actual product.
How to Start
- When you start your mini PC for the first time, the system will guide you in configuring the Windows operating system.
Power On
Press the power button to start your mini computer. You need to wait for several minutes for the first startup until the installation interface appears.
- Step 1: Select Language/Country (Region).
- Step 2: Select “Input Method” and click “Confirm”.
- Step 3: Select the second input method, or you can “skip”.
- Step 4: Network: Enter the password to connect after selecting WiFi. Or choose to plug in the network cable to connect. The network will automatically update, and the update process will stay on an interface for a long time, which will extend the startup time. (It is strongly recommended to skip the network connection)
- Step 5: Accept the License Agreement
- Step 6: Set Username and Password. After the installation process is completed, the desktop will appear.
Connect to WiFi
- Select the WiFi icon
from the taskbar to turn on the WiFi. - Select an access point in the list of available WiFi connections. Select one of the connections to start the network connection.
Note: You may be prompted to enter a security key to activate the WiFi connection.
Enter BIOS Setup
- BIOS (Basic Input/Output System) is the first software loaded when the Mini PC starts.
- Enter BIOS: Click the “Del” or “F2” key.
- Under normal circumstances, the default BIOS settings are applied in most cases to ensure optimal performance. Do not change the default BIOS settings unless you have installed new system components that require further setup or a BIOS update.
Note: Inappropriate BIOS settings may cause instability or failure to start. We strongly recommend that you change BIOS settings only with the help of technical service personnel.
Cleaning and Maintenance
- Turn off the product and unplug the power adapter before cleaning.
- Wipe the product housing with a wet towel, avoiding interfaces and electrical components, and then wipe it dry with a soft cloth. Do not use corrosive cleaning fluids for cleaning.
- Do not immerse the product in water or other liquids.
- After cleaning, place it in a dry and ventilated environment to dry thoroughly before use or storage.
Warranty
- We provide a one-year product quality warranty from the date of purchase and provide free lifetime product technical support.
- For normal faults or quality problems within the warranty period, we provide free replacement or repair services.
- For damage caused by manual operation, we will charge the cost of the product parts for repair.
- Our technical support team is at your service 24 hours a day. If you encounter any problems during use, please feel free to contact us.
FCC STATEMENT
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
CONTACT
- For detailed instructions, drivers download, more support, or more products, please get in touch with us or go to our website.
- Email: support@firebatpc.com
- Website: www.firebatpc.com
- Facebook: Firebat
Troubleshooting
Why can't the machine be turned on?
Why is the fan working and the light working normally, but it can't be turned on?
How to solve the blue screen crash?
Why is the network slow or the WiFi connection keeps disconnecting?
Why can't the USB port be used?
How to solve the video playback jam?
What is the reason why the computer becomes very hot?
What to do if the mini-computer cannot shut down?
Documents / Resources
 | T2 Mini PC |
References
- User Manualmanual.tools