T2 Mini PC
Product Information
Specifications:
- Display Connectivity: HDMI, DP, Type-C
- Power Adapter: DC
- Interface: USB for keyboard and mouse
- Internet Connection: Network cable or WiFi
- Note: WiFi setup required after turning on
Product Usage Instructions:
1. Display Connection:
Connect the display device using one of the following cables –
HDMI, DP, or Type-C.
2. Power Connection:
Connect the provided DC power adapter to the device.
3. Keyboard and Mouse Connection:
Connect your own keyboard and mouse to the device via the USB
interface.
4. Internet Connection:
Connect to the Internet using either a network cable or WiFi.
Remember to set up WiFi after turning on the device.
FAQs:
Q: Do I need to use the included power adapter?
A: Yes, it is recommended to use the included DC power adapter
for optimal performance.
Q: Can I connect to WiFi without setting it up?
A: No, you need to set up WiFi after turning on the device to
establish a connection.
Connect the display device via HDMl cable, DP cable, or Type-C cable
Connect the DC power adapter (included)
Connect the keyboard and mouse (self-provided) via the USB interface
Connect the Internet via network cable or WiFi
Note: WiFl needs to be set up after turning on
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipm ent com plies with FCC radiation exposure lim its set forth for an uncontrolled environm ent. This equipm ent should be installed and operated with a m inim um distance of 20cm between the radiator & your body. This transm itter m ust not be co-located or operating in conjunction with any other antenna or transm itter.
Documents / Resources
 |
FiREBAT T2 Mini PC [pdf] User Guide 2BB7B-T2, 2BB7BT2, T2 Mini PC, T2, Mini PC, PC |