12.A1	12.A2

12.A1/A2 DIGITAL ASTRO TIME SWITCH
Programmable with NFC technology with the App FINDER TOOLBOX downloaded from Google Play™ – Apple Store.

1. DISPLAY INDICATORS
   A. Setting Menu
   B. Days of the week (1=Mon…7=Sun)
   C. Holiday program
   D. Permanent Manual over-ride activated – channel A
   E. Channel A functions (ON, OFF, Astro ON, Astro OFF, Pulse)
   F. Day – Advanced/Retarded – seconds/minutes
   G. Channel B functions (ON, OFF, Astro ON, Astro OFF, Pulse)
   H. Permanent Manual over-ride activated – channel B (12.A2 only)
   I. Time-CP (postcode), year, day, month, hours, minutes, daylight saving ON/OFF, holiday program (Start: day/month. Finish: day/month) PIN ON/OFF, End
   L. Time switch without power supply (powered by battery) – Low battery (with power supply)
   M. Cancel
   N. Program number (max 50) – IT (country), CP (leading two characters of CP), Coor (geographic coordinates in degrees), N(North)/ S(South), E(East)/W(West), TZ(Time zone), Y(year), D(day), M(month), H(hour), M(minutes), Daylight saving ON/OFF (EU=Europe − BR=Brazil − AU=Australia) Holiday program (Start: day/month. Finish: day/month)
   O. Programming
2. SETTINGS (examples)
   2a. Setting: Country, CP (leading two characters of CP), year, day,
   month, hour, minutes, EU (daylight saving)
   2b. Holiday program (Start: day/month. Finish: day/month), PIN, END
   2c. Setup by geographic coordinates. Start at 2a, but at the select Country or select CP stage, scroll down to enter Coor setting. Continue by setting the coordinates and time zone.
   Latitude: North-South. Longitude: East-West. Time zone(TZ)
3. PROGRAMMING (examples)
   3a. ASTRO ON – ASTRO OFF Function (18:19 Astro ON + retarded
   10 min – 05:20 Astro OFF + advanced 20 min); Day: Mon…Fri
   3b. ON-OFF Function (6:25 ON – 19:15 OFF, Mon, Wed, Fri, Sun)
   3c. PULSE function (11:00 pulse 5 s, Mon-Wed Fri)
4. MANUAL MODE
   4a. Manual ON/OFF channel A
   4b. Manual ON/OFF channel B (only 12.A2)
   4c. Permanent Manual over-ride ON/OFF – Channel A
   4d. Permanent Manual over-ride ON/OFF – Channel B (12.A2 only)
5. DELETION of all program
8. DELETION of a single program
   NOTE
   – Battery replacement: BATTERY CR 2032 (LiMnO2) 3V, 230mAh. Complies with Article 11, EU directive 2006/66/CE. Dispose of batteries according to local regulations
   – Back-light display (only with power supply)
   – Minimum switching interval: 1 second (pulse function)
   – ASTRO times vary over the year, time switch times remain constant

   EN 60669-1/EN 60669-2-1
   	12.Ax.8.230.0000 UN 110…230 V AC (50/60 Hz)/DC Umin – Umax 90 V – 264 V (AC/DC) P 2.8 VA (50 Hz)/0.9 W
   	12.A2.0.024.0000 UN 24 (12…24) V AC (50/60 Hz)/DC Umin – Umax 10 V – 30 V (AC/DC) P 2.2 VA/1.2 W
   	1 CO (SPDT) (12.A1) 2 CO (DPDT) (12.A2) 16 A 250 V AC
   	AC1 4000 VA AC15 (230 V AC) 750 VA
   	(230 V)………2000 W (230 V)………..750 W CFL-LED (230 V)…….400 W
   	(–20…+50)°C
   IP20

Documents / Resources

finder 12.A1/A2 Digital Astro Time Switch [pdf] Instruction Manual 12.A1, 16A Time Astro-Switch, 12.A1 16A Time Astro-Switch, 12.A2, 12.A1 A2 Digital Astro Time Switch, Digital Astro Time Switch

References

• User Manual